- Description
Details
The D14-2-DANTE (D Series) represents the global benchmark for digital audio induction loop systems. The compact, elegant and sturdy units not only feature digital signal processing and networking functionality, but are also the most versatile and powerful solution available.
The D14-2-DANTE hearing loop amplifier is a 14 Amp dual output class ‘D’ driver; meaning a 60%+ increase in energy efficiency over existing solutions. Both drivers feature capacitive touch front panels with intuitive menus, built in test signals, and are fully networkable with a Wi-Fi accessible standard browser based control panel for remote set-up, monitoring and email alerts. Dante versions also feature a Dante specific RJ45 input for plug and play Dante network audio.
The D14-2-DANTE features 14 Amps per loop output plus ample voltage headroom, making it the most flexible solution on the market, suitable for a large range of applications. The added power of the D14-2-DANTE provides a solution for installations in environments containing very high levels of metal, previously not possible without the use of combiners.
In another first for high-power Class D Induction Loop Drivers, installation can be performed with total confidence, as unique multi-stage filtering ensures compatibility with both other system equipment and global EMC regulations. The D14-2-DANTE also boasts Dual Slope Metal Loss Control that caters to a wide range of metal loss frequency characteristics.
- Features
Features
- Dante input for network audio
- Drives 2 output channels at 14ARMS each, featuring accurate and stable 90° phase shift
- Networkable with remote browser interface
- Digital display & intuitive ‘touch’ menu system
- 3 modes; Main, Status & Quick
- Highly energy efficient Class-D amplifier with low heat dissipation
- Up to 2 x 1,450 m2 (15,607 sq. ft.) Perimeter Loops area coverage
- Up to 3,300 m2 (35,520 sq. ft.) MultiLoop™ Low Loss area coverage
- Compact 1U rack mount unit with internal transformer for simple rack installation
- Optimized for speech frequencies with unmatched intelligibility & capable of high quality musical reproduction
- AGC & Dual Slope MLC
- Active status monitoring & remote fault reporting via email
- Data compliant with: IEC 62489-1 Standard
- Specification
Audio Frequency Response 80 Hz to 6.3 kHz ±3 dB Distortion THD+N <0.2 %, 1 kHz Sine Wave at Full Current AGC Optimized for Speech, Dynamic Range >36 dB Metal Loss Correction Corrects System Frequency Response Due to Metal Structures in a Building. Gain Constant at 1kHz, Adjustable Gain Slope from 0 to 4dB per Octave in 0.25dB Increments. Custom 2 Slope MLC Allows Different Slopes and Transition Frequency to be Set Via The Menu. This does not Compensate for Signal Loss from Metal Structures Which can be Significant. Phase Shift User Selectable at 0° or 90° Between Outputs Indicators AGC LEDs Indicates The Status of The AGC in dB Current LEDs Indicates The Peak Current Delivered to The Loop Clip LED Indicates that The Signal on The Loop Output is Clipping and Requires Adjustment to Either The Driver Settings, Loop or Potentially The Selection of a More Powerful Driver Error LED Check The ‘Status’ Menu for Loop, Amplifier and Temperature Errors and Access Fault Codes Interconnections Dante RJ45 Ethernet input Input 1 XLR Balanced Inputs, Switchable Between Microphone and Line Via Panel Menu: Microphone Specification; 200 - 600 Ω, Sensitivity -64 dBu. Selectable 12 V Phantom Power on Microphone Only. Line Sensitivity; -39 dBu, Input Impedance = 17kΩ Input 2 XLR Balanced Inputs, Switchable Between Microphone, Line and AES Via Panel Menu: Microphone Specification; 200 - 600 Ω, Sensitivity -64 dBu. Selectable 12 V Phantom Power on Microphone Only. Line Sensitivity; -39 dBu, Input Impedance = 17kΩ Loop Connector/s Channels A / B, Neutrik NL4 Speakon, Drive Current: 14 A (RMS), 19.8 A (Peak) up to 60 Seconds Continuous 1 kHz Sine Wave, Peak >19.8 A Per Channel, Cont. Pink Noise 6.6 (RMS), Short Term Peaks > 20 A Per Channel, Drive Voltage: 33.9 V (RMS), 45 V (Peak) at Maximum Output Current Per Channel Slave I/O 6.35mm Jack Socket for Linking More Than One Amplifier. Inserting Plug Disables Other Inputs DC Output Resettable, Fuse Protected 12V 0.1A. Operation can be Configured Via Menu. Loop Monitor Connection Provides Access to Monitor Actual Loop Current Via a 3.5mm Stereo Headphone Connector on Front Panel Channel A on Left, Channel B on Right Loop Perimeter Loop - Coverage No Metal (0dB): 1:1 Aspect Ratio 2 x 1,300 m² (13,993 sq. ft.), 3:1 Aspect Ratio 2 x 1,145 m² (15,607 sq. ft.) Loss Control Phased Array - Coverage No Metal (0dB): 3,300 m² (35,520 sq. ft.) Moderate Metal Loss (-5dB): 925 m² (9,956 sq. ft.) High Metal Loss (-10dB): 400 m² (4,305 sq. ft.) Severe Metal Loss (-15dB): 180 m² (1,937 sq. ft.) Low Spill Phased Array - Coverage No Metal (0dB): 1,225 m² (13,185 sq. ft.) Moderate Metal Loss (-5dB): 700 m² (7,535 sq. ft.) High Metal Loss (-10dB): 340 m² (3,659 sq. ft.) Severe Metal Loss (-15dB): 120 m² (1,291 sq. ft.) Power 120 VAC, 160 W, 45 - 65 Hz, Power Switch on front panel Environmental Temperature - Operation 0 C (32 F) to 35 C (95 F) Cooling Variable Speed Fan Cooled. Front Inlet, Rear Exhaust Relative Humidity 20 to 90% Relative Humidity Standards IP20 Rated Compliance Marks and Approvals CE and ETL Listed Physical Mounting Freestanding or 1U 19" Rack Mount (Brackets Included) Dimensions (H x W x D) 1.74" (44 mm) x 16.93" (430 mm) x 11.42" (290 mm) Weight 15.3 lbs (6.9 kg) Shipping Weight 18.3 lbs (8.26 kg) - Documents
Documents
- In The Box
In The Box
- (1) D14-2-DANTE D Series MultiLoop Driver (14 Amps x 2)
- (1) 1U 19" Rack Mount (Brackets Included)
- (1) Handbook and Installation Instructions
- (1) T-Coil Loop System Present Sign (Deaf Logo)
- (2) Neutrik NL4 Output Connectors for Each Output
- (1) Region Specific IEC Power Cable
- (1) Status and DC Connectors
- Reviews
Write Your Own Review