Allen and Heath dLive DX32 96kHz Modular Expander

Home /
Live Sound Equipment /
Signal Processing & Effects /
Expanders & Gates /
Allen & Heath dLive DX32 96kHz Modular Expander

Allen & Heath dLive DX32 96kHz Modular Expander

More Views

Allen & Heath dLive DX32 96kHz Modular Expander

Part # DLIVE-DX32

Model # DX32

The Allen & Heath DX32 is a fully modular expander for adding extra inputs and outputs to a dLive system. Each DX32 features 4 slots for 8 channels of high end, low noise microphone preamps, 8 analog outputs, 8 AES/EBU (32-192kHz sample rate, stereo) digital inputs & 8 AES/EBU (44.1, 48, 88.2, 96kHz switchable per output) digital outputs.

Availability:

Qty:

Need Quantity Pricing?

We provide quantity discounts for contractors & installers, schools, government, and military buyers on select brands and products.

Talk To An Engineer

Description

Details

Allen & Heath dLive DX32 96kHz Modular Expander

The DX32 is a fully modular expander for adding extra inputs and outputs to a dLive system. Each DX32 features 4 slots for 8 channels of high end, low noise microphone preamps, 8 analog outputs, 8 AES/EBU (32-192kHz sample rate, stereo) digital inputs & 8 AES/EBU (44.1, 48, 88.2, 96kHz switchable per output) digital outputs. The DX32 has slots for 1 or 2 hot-swappable redundant power supplies. A unique auto firmware matching feature keeps the DX32 in sync with the rest of the dLive system.

The DX32 Expander adds remote, modular I/O to a dLive, Avantis or SQ system. It provides 4x 8 channel slots to fit a selection of analog or digital I/O.

The DX32 connects via a single Cat5e cable to the dLive Surface, MixRack, SQ SLink port, Avantis SLink port or DX Hub via a secure etherCON port. Two cables can be used for redundant connection to compatible dLive hardware.

With dLive

Up to 2 DX32 Expanders can be connected directly to a dLive MixRack, and a further DX32 can be connected to the Surface. More units can be added to a dLive system via a DX Link card or DX Hub.

With Avantis

A single DX32 can connect directly to an Avantis SLink port. Up to 8 DX32s can be added to an Avantis system via DX Hub and/or DX Link cards.

With SQ

A single DX32 can connect directly to an SQ SLink port. Up to 4 units can be added to an SQ system via a DX Hub.

Features

Features

4x 8ch modular design
Redundant, hot-swappable power supply
Dual redundant Cat5 link to Surface or MixRack
Rack-mounted or shelf/floor operation
3 Year Warranty

Specification

Inputs
Mic/Line XLR Inputs	Balanced XLR, +48V phantom power
Mic/Line Preamp	Fully recallable
Input Sensitivity	-60 to +15dBu
Analog Gain	+5 to +60dB, 1dB steps
Pad	-20dB Active PAD
Maximum Input Level	+30dBu (PAD in)
Input Impedance	>4kΩ (Pad out), >10kΩ (Pad in)
Mic EIN	-127dB with 150Ω source
Phantom Power Indication	Per socket, internal or external phantom power sensing, triggered at 24V
Digital Inputs	AES3 2 Ch XLR, 2.5Vpp balanced terminated 110 Ω SRC on each pair, range 32k - 192kHz, with bypass option
Outputs
Analog XLR Outputs	Balanced, Relay protected
Output Impedance	<75Ω
Nominal Output	+4dBu = 0dB meter reading
Maximum Output Level	+22dBu
Residual Output Noise	-92dBu (muted, 20-20kHz) -90dBu (muted, 20-40kHz)
Digital Outputs	AES3 2 Ch XLR, 2.5Vpp balanced terminated 110 Ω 96kHz sampling rate, switchable to 48kHz, 44.1kHz
System
Sampling Rate	ADC: 24-bit Delta-Sigma DAC: 24-bit Delta-Sigma
Latency	+ 8 samples, DX32 to Mixrack or DX32 to Surface (DX hop)
System Latency	0.7 ms (MixRack XLR in to XLR out, Input to Mix) + 5 samples, Surface to Mixrack (GigaACE hop)
Operating Temperature Range	0 deg C to 35 deg C (32 deg F to 95 deg F)
Power
Mains Voltage Operating Range	100-240V AC, 50/60Hz
Mains Power Consumption	300W max (MPS16 V1 300W) 250W max (MPS16 V2 250W) MPS16 power consumption is printed under AC inlet
Temperature
Operating Temperature Range Fitted with	MPS16 V1 300W: 0°C to 35°C (32°F to 95°F) MPS16 V2 250W: 0°C to 40°C (32°F to 104°F)
Dimensions (H x W x D)	6.97" (177 mm) x 17.05" (433 mm) x 11.42" (290 mm)
Weight	23 lbs (10.5 kg)

Documents