Peavey PZS 140RA Mixer Amplifier

Home /
Peavey PZS 140RA Mixer Amplifier (Discontinued) See Replacement Pure Resonance Audio RZMA120BT

Description

Details

Peavey PZS 140RA Mixer Amplifier (Discontinued) See Replacement Pure Resonance Audio RZMA120BT

The Peavey PZS 140RA Mixer Amplifier defines the concept of room combining. This versatile matrix mixer allows you to send a single audio source to several rooms, or up to five different sources to multiple rooms, creating individual audio environments. The D4S wall controller allows you to quickly configure rooms by remotely selecting your audio sources. Up to eight D4S controllers can be used with a single PZS 140RA, allowing unprecedented efficiency and control at very little expense.

The PZS140RA is a full-featured matrix mixer with four integral 35 Watt power amplifiers. The five-input, four-output architecture is supported by a full mix matrix with microprocessor-based assignment, store/recall functionality, front panel controls and support for the new D-Series remote control network.

The compact 3U package features an intuitive front panel design with easy access to zone assign buttons, EQ, input level and output drive controls. Visual feedback is included for matrix routing assignment, input and output audio level and paging mute for master channels.

Among the most exciting features is integral support for the D-Series D4S four-button control panel. The D4S provides remote access to the PZS 140RA's matrix cross points and can be configured for either "input to zone" (source select), or "zone from input" (zone select) operation. Multiple D4S panels can be connected simultaneously via the included D-Series RJ-45 network connector, making installation simple and cost effective. The front panel assignment LEDs mirror changes made by the remote controls, so monitoring the status of remote operation is easily confirmed at the front panel.

The versatile PZS 140RA includes microphone and line level inputs terminated on removable Euro connectors on each channel. In addition, input Channels 3, 4 and 5 also include summing RCA connectors for easily terminating consumer line-level sources for music playback applications. Integral gate dynamics are provided for vox ducking, with channels 1 and 2 configured as master inputs. These inputs feature additional front panel benefits including a mute status LED and recessed threshold and hold controls.

Each of the PZS 140RA's four output sections include a 35 Watt power amplifier. In addition to a direct-coupled, 4 Ohm output, the PZS 140RA also features transformer-coupled constant voltage (domestic: 25 Volt, 70 Volt; export: 70 Volt, 100 Volt) outputs, an 8 Ohm output and a 600 Ohm balanced line level output. All output section connections are also on removable Euro connectors for easy installation and service. The output section is supported by a simple front panel interface including master level controls, signal presence and clipping LED indicators and matrix bus assign buttons.

Features

Features

Five input channels, assignable to any output
Mic and line level inputs for each channel
RCA stereo summing inputs (channels 3, 4 & 5)
Four balanced (600 Ohm) line level outputs
Four 35W power amplifiers
70V, 25V, 8 Ohm and 4 Ohm amplifier outputs domestic
100V, 70V, 8 Ohm and 4 Ohm amplifier outputs export
Removable Euro connectors for all I/O
Support for the D-Series D4S remote control panel
Signal LED indicator on each input channel
Zone assignment switches for each channel and output bus
Adjustable threshold and paging hold (ch 1/2)
Four master output level controls
Signal and clipping LEDs on all outputs
Defeatable 48-Volt phantom power on all microphone inputs
Shelf, or rack-mountable fan-cooled package
Rack kit included

Specification

Rated Power (Individual 4 ohm Load)	5W @ 60 Hz to 20 kHz < 1% T.H.D.
Minimum Load Impedance	4 ohms, direct coupled. 25V, 70V, and 8 ohm transformer coupled
Frequency Response	0 Hz to 20 kHz; +0, -3 dB 9 transformer coupled
T.H.D., One Channel Driven	0.05% @ 35W @ 1kHz
Mic (Inputs, Channel 1 & 2)	2k ohm, -54 dBu (1.5 mV, balanced)
Line (Inputs, Channel 1 & 2)	>50k ohm , -18 dBu (100 mV balanced)
RCA (Inputs, Channel 1 & 2)	>50k ohm, -18 dBu (100 mV balanced)
Residual (Signal to Noise Ratio)	90 dB below rated power (channel down, master full)
Line Inputs (Signal to Noise Ratio)	82 dB below rated power (controls nominal, 150 ohm terminated)
Mic Inputs	(Controls nominal, 150 ohm terminated), 82 dB below rated power
Mounting	Three EIA Space Rackmount
Dimensions (H x W x D)	5.63" (142.88 mm) x 19" (482.6 mm) x 15.38" (390.53 mm)
Weight	37.3 lbs (16.92 kg)
Shipping Weight	42.5 lbs (19.28 kg)

Documents