- Description
Details
The E18SW is a high-performance direct radiation subwoofer with a single, 800W, 18-inch, aluminum frame woofer. It’s designed to produce crushing low-end for live performance with kick-drum and bass in the PA or for high-level, high-energy dance music. A threaded, M20 pole socket and speaker pole are provided for sub/satellite use with any of the E Series two-way models. For portable applications it includes attachment points for four optional casters. The subwoofer’s 4-ohm impedance means that a single woofer can be optimally powered by a less expensive amplifier.
E Series loudspeakers will perform very well with any quality, professional power amplifier – but by taking advantage of the complete E Series Entertainment System, more performance and options are available. Today’s powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance. When used with QSC GXD or PLD amplifiers or with a QSC TouchMix digital mixer, E Series loudspeakers can also take advantage of advanced DSP. QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke.- Features
Features
- High output, professional quality sound with 800W continuous power
- Advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers
- E Series Entertainment System DSP Tunings are now available for PLD, CXD and GXD processing amplifiers:
- For PLD/CXD visit Amplifier Navigator Software
- For GXD visit the GXD Firmware Updater
- Rugged tour-grade textured paint
- Foam-lined perforated steel grill
- E18SW includes speaker pole
- Specification
Configuration 1 x 18", subwoofer, non-powered Frequency Range (-6 dB) 37Hz to 230Hz Power Capacity Continuous/Peak 800W / 3200W Sensitivity 98dB, 1W @ 1m Coverage Angle N/A Ouptut (Peak SPL @ 1m) 133dB Drivers LF: 18" (457 mm) driver with 4" (102 mm) voice coil Nominal Impedance 4Ω Cross-Over Recommended 80-120Hz LPF Input Connections 2 x NL4, 1 x barrier strip Enclosure Rectangular, plywood, black texture paint finish. Four side-mounted handles. Rear panels provision for optional casters. Perforated, powder-coated steel grille with foam lining Mounting and Suspension M20 threaded pole-mount socket 24" (610 mm) pole included Dimensions (H x W x D) 24.2" (616 mm) x 23.2" (590 mm) x 23.8" (605 mm) Net Weight 95 lbs (43 kg) Shipping Weight 106 lbs (48 kg) - Documents
Documents
- Reviews
Write Your Own Review



