Skip to main content

QSC WL218-sw Dual 18 inch Flying Subwoofer (Discontinued)

Part #:
WL218-sw
Model #:
WL218-sw
Availability: No Longer Available
Contact us for comparable solutions.
Certified Audio
Expertise
FREE Custom
System Design
Get Expert
Help Fast

Ask an Expert

Our expertly trained Sales Engineers are ready to help!

(888) 256-4112

Get a Quote, Price or Support Fast!

We want to make contacting us as fast and as easy as possible. Please reach out if you have any questions or concerns about our products, system design, technical support, or orders.
Phone Monday - Friday
8:00 AM - 5:00 PM
1-888-256-4112
Email Contact us by email or
our simple form.
SEND EMAIL
The QSC WL218-sw is a premium, high-performance, dual 18" subwoofer designed for suspended or ground stacked use in the most demanding touring or installed concert applications.

Description

The QSC WL218-sw is a premium, high-performance, dual 18" subwoofer designed for suspended or ground stacked use in the most demanding touring or installed concert applications. With an impressive combination of punch, low-frequency extension and accuracy, the WL218-sw is an ideal companion for QSC's acclaimed WideLine as well as other professional sound reinforcement systems.

Sound system designers and operators are increasingly turning to subwoofer systems that are flown with the main array for a more seamless acoustical transition from the bass to the low-mid region. With a simple, three-point suspension design that is essentially a scaled up version of the QSC WideLine system, the WL218-sw fulfills the requirement while also delivering powerful and stunningly accurate low frequency output.

Suspension of the array requires one AF218-sw for each subwoofer array. The AF218-sw is a simple, heavy-duty array frame constructed of welded, aviation-grade 6061-T6 aluminum and intended for suspension of up to eight WL218-sw subwoofers with a 10:1 design factor. For ground-supported applications, the subwoofers may be stacked using the interlocking feet and recess features machined into the enclosure's end caps.

The 18" woofers incorporate a double layer spider and triple roll surround for extended and controlled excursion at extreme power. The 4" voice coil is wound on a fiberglass former to prevent deformation at high operating temperatures and is extensively vented to reduce power compression. An aluminum demodulating ring is employed for low distortion.

Features

  • Simple, convenient suspension system based on the proven QSC WideLine design. Supports up to 8 WL218-sw subwoofers with 10:1 design factor.
  • Very high acoustic output capability - 139 dB SPL (1m) peak.
  • Ample "punch" combined with low-frequency extension down to 31 Hz.
  • Comprehensive transport and handling features including an easy to attach dolly and twelve thoughtfully placed handles.
  • Premium-grade, long-excursion, high-power woofers with 4", fiberglass voice coils, double layer spiders and triple roll surrounds.
  • Birch ply enclosure with independent, dual chambers and extensive internal bracing for rigidity and solid, accurate reproduction.
  • Dual 18" portable subwoofer, can be ground stacked or suspended in arrays using integral array construction suspension hardware.
  • Includes transportation dolly.
  • Available in black and white.

Specifications

Configuration 2 x 18" vented subwoofer
Low Frequency Transducer 2 x 850 W, 8 ohm 18" woofer with a 4" voice coil, ceramic magnet assembly
Frequency Response (±3 dB) 1 37 Hz - 200 Hz (without processing)
Frequency Response (-10 dB) 1 31 Hz - 1 kHz (without processing)
Nominal Impedance 4 ohms
Continuous Power Capacity 2 1700 W
Max Recommended Power 3000 W
Sensitivity (1 W at 1 m) 1 101 dB
Maximum Output (SPL at 1 m) Continuous, Peak 133 dB, 139 dB
Enclosure
Cabinet Type Vented, trapezoidal enclosure
Material Baltic birch plywood / 36 mm baffle and side panels; 15 mm top and bottom
Finish Black texture coat
Grille 14 gauge powder coated steel
Connectors (2) NL4
Pin Outs Pins (1+/1- Sub, 2+/2- NC)
Attachment Points Integral, adjustable rigging system, vertical splay adjustable in 1° increments from 0° - 10°
Accessories Available AF218-sw Array Frame (optional) COVER WL218-sw Soft Cover (optional)
Net Weight 204 lbs (92.5 kg)
Shipping Weight 244 lbs (110 kg) (includes dolly)
Dimensions 21.3" H x 45.9" W x 34.75" D (541 mm x 1166 mm x 882 mm)
My Cart