The D-J1 microphone input assembly is a complete microphone input panel assembly. Connections to the female front-panel XLR jack are made on a rear barrier block. Four terminals are provided: CASE GROUND, SHIELD (XLR pin 1), + (XLR pin 2) and - (XLR pin 3). The installer may install a jumper between the SHIELD connection and CASE GROUND if desired. The back of the D-J1 is finished with a metal enclosure clearly labeled for easy installation.
The D-J1 fits directly into back boxes, available from RDL to fit cabinets or US or international walls (RDL WB-1U). They may be mounted directly into cabinets or most standard US single gang electrical boxes.
| Input Connector | XLR female gold contacts |
|---|---|
| Output Connector | Barrier block |
| Output Connections (4) | CASE GROUND, SHIELD (XLR pin 1), + (XLR pin 2), ‑ (XLR pin 3) |
| Power Requirement | Passive |
| Mounting Box Requirement (W x D) | 1.80" (45.7 mm) x 1.75" (44.5 mm) |
| Dimensions (H x W x D) | 4.13 (104.9 mm) x 1.7" (43.2 mm) x 2.15" (54.7 mm) |
| Weight | 0.35 lbs (0.1588 kg) |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
