- Description
Details
The PZM30 D high-performance hemispherical boundary layer microphone is a Pressure Zone Microphone® designed for professional recording, sound reinforcement and broadcasting. The capsule is mounted in the pressure zone, an area where direct sound and reflected sound are in phase, which provides a 6dB higher sensitivity.
Two selectable frequency responses (flat/rising) provide greater flexibility in mic placement and sonic character. The rising position of the frequency switch adds brilliance and a crisp attack on percussion, drums, or piano. The PZM30 D comes in a very rugged, low-profile, metal housing with detachable cable that makes it sturdy and reliable for heavy duty applications.- Features
Features
- Pressure Zone Microphone design prevents coloration from surface sound reflections
- Choice of flat response or rising high-frequency response
- PZM30 D uses a rugged detachable cable
- Hemispherical pickup pattern
- Specification
Transducer Electret condenser Frequency Response 20 Hz to 20 kHz Polar Pattern Hemispherical when used on a floor, wall or ceiling Open Circuit Sensitivity 7 mV/Pa (–43 dB re 1volt/Pa) Power Sensitivity –43 dB re 1 mW/Pa. EIA sensitivity–135 dBm Impedance 240 ohms, balanced. Recommended minimum load impedance 1000 ohms Self-Noise 20 dB equivalent sound pressure level, A-weighted S/N Ratio 74 dB at 94 dB SPL Maximum Sound Pressure Level 150 dB SPL at the microphone produces 3% THD Polarity Positive pressure on the diaphragm produces positive voltage on pin 2 Operating Voltage Phantom power, 12 to 48 volts DC, positive voltage on pins 2 and 3 Current Drain 1.1 mA Connector Male 3-pin XLR-type Cable None supplied; use 2-conductor shielded microphone cable Switch Frequency-response select switch for rising or flat response Color Black Dimensions (H x W x D) 0.75" (19 mm) x 5" (127 mm) x 5.98" (152 mm) Weight 0.41 lbs (184 g) - Reviews
Write Your Own Review