More Views

Renkus-Heinz ICL-R Live Module (Discontinued)

Part # ICL-R
Model # ICL-R

IC Live creates six array configurations for anything from a small hotel meeting to a live concert for thousands of people.

Description

Details

IC Live creates six array configurations for anything from a small hotel meeting to a live concert for thousands of people.

The basic IC Live module can be used alone or combined with one or two IC215S subwoofers for added low frequency impact. The IC215S dual 15" bandpass subwoofer supplies the extra bass impact needed for high level music.

Two ICL-R modules arrayed "horn to horn" form a taller, higher output array that can be used alone, or supported by one or two IC Live sub-woofers. Any of these array configurations assembles in minutes with interlocking hardware system.

Digital beam steering puts IC Live output where it belongs: on the audience, and way from walls and ceilings.

Computer software lets you define the opening angles for as many as four sonic beams from each IC Live array module (up to 8 beams when stacked) and aim them up or down. Meanwhile, the slim enclosure stays vertical and inconspicuous.

Two ICL-R modules can be stacked for even tighter control and higher output.

Iconyx transparent technology controls sound with the most advanced, intelligent DSP. Multi-channel Class D digital amplifiers with integral DSP engines control every single array element with programmable precision.

High-current audiophile output stages power each individual lightweight, efficient transducer in the Iconyx array. Even at 100 feet, SPL is an impressive 105 dB (108 dB when stacked). Output is flat from 80 Hz to 20 kHz.

Low frequency energy can be extended to 40 Hz or below with matching subwoofers.

Iconyx IC Live arrays are engineered for portable applications, with an easy-to-use interlocking hardware system that makes setup simple.

Two IC Live arrays can be combined for added output and control. When full range musical output is important to the program, one or two IC215-S dual 15-inch subwoofers can be added to either array.

The subwoofers can act as tall or wide bases for IC Live arrays using the interlocking hardware system.

RHAON empowered IC Live arrays provide a full set of remote control and supervision functions, along< with the ability to store up to ten preset configurations in memory.

The presets adapt the arrays' 150° wide horizontal coverage for typical applications such as hotel meeting rooms or auditoriums.

For more complex situations, Iconyx BeamWare software makes it easy to shape the array’s coverage to the audience area.

Nine presets (four factory and five custom) can be stored in memory, ready for selection from the rear panel. Simply scroll through them using the Up/Down buttons and indicator LEDs on the rear panel to find the right one for any given room and audience, and you're ready to go.

Features

Features

  • New Directions for Live Event Production
  • Adaptable, Articulate, Invisible
  • Powerful, Accurate, Musical
  • Portable, Scalable, Versatile
  • One-Touch Presets, Intuitive Software
Specification
Sensitivity01.0 V (for Rated Power Output)
Freq. Range80 Hz to 20 kHz
Max SPL102 dB Pgm, 105 dB Peak @ 100 Ft. (30.5 Meters), 105 dB Pgm, 108 dB Peak When Stacked (3-Octave Bandwidth Centered at 2 kHz)
Horiz. Dispersion150° Up to 3 kHz; 120° Above 3 kHz
Vert. Opening Angles20°, 25° and 30° (5°, 10°, 15° and 20° When Stacked)
Aiming AngleAdjustable From -30° to +30°
Typical Throw66 Ft. (20 m) 132 Ft. (40 m) When Stacked
Beam ControlEffective Down to 800 Hz (400 Hz When Stacked)
No. TransducersFive 6.5-Inch Cone Transducers with Neodymium Magnets
Three 1-inch HF Titanium Nitride Compression Drivers
No. Amp. Channels8 (Per Module)
InputsAnalog Audio Inputs: Looping XLR (Female in, Male Out) and Phoenix 6-pin (Looping 3-in, 3-out)
CobraNet: Dual RJ45 Connectors (For CAT 5e Copper Cable)
AES/EBU: Phoenix Connector
Power ConnectorPowercon Locking Connector
Controls (Rear Mounted)Mute Button
Up & Down Output Level Push Buttons
10 dB Input Pad (on Analog 1 Input)
Power On/Off
Push-To-Reset Circuit Breaker
Configuration PreSet Selector
Computer ControlsGain, Mute, On/Standby, Input Selection Compression, 8-Band Parametric EQ, Shelving & Rolloff Filters, Delay, Configuration Preset Readout
Status IndicatorsPower, Signal, Overdrive, Thermal, Mute, Input Pad, Failure, Preset Configuiration
Network Digital Format16, 20 or 24 bit PCM; 48 or 96 kHz Sample Rate; Selectable Network Latency
Hanging MethodAeroQuip Fly-Track
EnclosureFinnish Birch with Aluminum End Caps And Perforated Steel Grill; Suitable For Outdoor Use
FinishBlack Paint
Dimensions (H x W x D)48" (1215 mm) x 8" (200 mm) x 11.3" (287 mm)
Weight61 lbs (27.7 kg)
Documents
Reviews

Be the first to review this product

Write Your Own Review

You're reviewing: Renkus-Heinz ICL-R Live Module (Discontinued)