Skip to main content

Rolls MA66 Two Zone Mixer/Amplifier (Discontinued)

Part #:
MA66
Model #:
MA66
Availability: No Longer Available
Contact us for comparable solutions.
Certified Audio
Expertise
FREE Custom
System Design
Get Expert
Help Fast

Ask an Expert

Our expertly trained Sales Engineers are ready to help!

(888) 256-4112

Get a Quote, Price or Support Fast!

We want to make contacting us as fast and as easy as possible. Please reach out if you have any questions or concerns about our products, system design, technical support, or orders.
Phone Monday - Friday
8:00 AM - 5:00 PM
1-888-256-4112
Email Contact us by email or
our simple form.
SEND EMAIL
The Rolls MA66 is a 2 Zone mixer with a 20 watt per Zone power amplifier with built in class D design so it does not generate any heat to the chassis, it can be used in any application.

Description

The Rolls MA66 is a 2 Zone mixer with a 20 watt per Zone power amplifier built in. The amp section is class D design so it does not generate any heat to the chassis, it can be used in any application. Including Phantom power, talk over that is zone assignable, and an assignable release time for the talk over circuit. With six inputs (2 mic/line XLR and 4 RCA) and an 1/8” jack on the front panel the MA66 has plenty of input capability to satisfy almost any installation. The output section of the MA66 has 20 watts per Zone (40 watts total) that is all class D design. The MA66 also features RCA main outputs. We have also included a remote pad for both zones so you can run an external pad control to any location. The MA66 is easy for anyone to use from the front, but from the rear it is just complex enough it will fill even the most demanding installation requirements. With the included external power supply the MA66 has just about every approval known to man so you can spec it in almost any installation.

Features

  • Two Zone Outputs
  • Two XLR Microphone Inputs
  • Individual switchable phantom power
  • Front panel 3.5mm stereo input
  • 20 + 20 Watt Power output

Specifications

Input Impedance Mic: 600 Ohms XLR balanced; Source: 22K Ohms RCA
Max Input Level Mic: -14 dBV Mic level; RCA: +24 dBV
Total - In/Out Connectors 2: XLR, 6: Stereo RCA, 1: 3.5mm
Phantom Power +15 VDC
RCA Output Level +17 dBV max (impedance 1K Ohm)
Output Power 20 Watts @ 4 Ohms/Per Zone; 12 Watts @ 8 Ohms/Per Zone
Max Gain Mic: 70 dB; Source: 30 dB
Noise Floor - 80 dB, THD:
S/N Ratio 96 dB
Power Output 20 Watts X 2 (4 Ohms)
Voltage Gain 32 dB
Maximum Supply Voltage 30 VDC
THD .05% typical
EIN 3 mV
Efficiency 85%
Bandwidth 20Hz - 25 kHz
Dimensions (H x W x D) 1.75" (44.5 mm) x 19" (482.6 mm) x 4" (101.6 mm)
Weight 7 lbs (2.3 kg)

DOCUMENTS

My Cart