Sennheiser ew 172 G3 Wireless Instrument System

Home /
Sennheiser EW 172 G3 Wireless Instrument System (Discontinued)

Description

Details

The Sennheiser ew 172 G3 Wireless Instrument System allow you to retain that great guitar tone but go wireless.

The system's new cable emulator feature allows you adjust virtual cable lengths to get sound response just like a cable. Another great new feature for guitarists is the built-in guitar tuner, right on the display. A built in 5 band EQ allows you to fine tune your sound even further. Bass players in particular will be pleased with the enhanced AF frequency response: it starts at a thundering 25 Hz, which will especially please players with 5 string bass guitars.

With its improved design and new features, this rugged G3 rack receiver is ready for the road with its proven transmission reliability and inspiring flexibility. The sound check mode allows you to check the audio and RF signal at any time during setup. 20 frequency banks with 12 preset frequencies each, plus a user-programmable bank mean you can easily run multiple channels of G3 wireless simultaneously.

The wireless body-pack standard gets even better. Sennheiser has packed many useful features in the 158g weight of the SK 100 G3. The SK 100 G3 has an easy-to-read graphic display, infrared sync, charging contacts, cable emulation, RF mute, an intuitive menu and much more. As features alone are no substitute for audio quality, the AF frequency response was expanded to 25-18,000 Hz for the truest sound.

Standard instrument cable for evolution wireless bodypack transmitter.

Features

Features

Sturdy metal housing (transmitter and receiver)
42 MHz bandwidth: 1680 tunable UHF frequencies for interference-free reception
Enhanced frequency bank system with up to 12 compatible frequencies
High-quality true diversity reception
Pilot tone squelch for eliminating RF interference when transmitter is turned off
Automatic frequency scan feature searches for available frequencies
Enhanced AF frequency range
Increased range for audio sensitivity
Wireless synchronization of transmitters via infrared interface
User-friendly menu operation with more control options
Illuminated graphic display (transmitter and receiver)
Auto-Lock function avoids accidental changing of settings
HDX compander for crystal-clear sound
Transmitter feature battery indicatation in 4 steps, also shown on receiver display
Programmable Mute function
Integrated Equalizer, Soundcheck mode and guitar tuner
Contacts for recharging BA 2015 accupack directly in the transmitter
Wide range of accessories adapts the system to any requirement

Specification

Compander	HDX
Audio-XLR connector	6.3 mm
Presets	12
Frequency response	25 - 18,000 Hz
THD, total harmonic distortion	< 0.9%
Signal-to-noise-ratio	>110 dB(A)
RF frequency range	516 - 865 MHz
RF output power	30 mW
Transmission/receiving frequencies	1680
Switching bandwidth	42 MHz
Peak deviation	±48 kHz
In compliance with	ETS 300422 , ETS 300445 , CE , FCC
Operating time (transmitter)	>8 h
Antenna connector	2 BNC, 50 Ohms
Input voltage range	3.0 V eff line
Audio output level (balanced)	XLR: +18 dBu max
Audio output level (unbalanced)	Jack: +12 dBu max
Dimensions (H x W x D)
Receiver	8.3" (212 mm) x 8" (202 mm) x 1.7" (43 mm)
Transmitter	3.2" (82 mm) x 2.5" (64 mm) x 0.9" (24 mm)
Weight
Receiver	2 lbs (900 g)
Transmitter	0.35 lbs (160 g)

In the Box