| Cartridge Type | Electret Condenser |
|---|---|
| Polar Pattern | Half-cardioid (cardioid in hemisphere above mounting surface) |
| Frequency Response | 20 to 20,000 Hz |
| Output Impedance @ 1 kHz | 146 Ω |
| Sensitivity open circuit voltage, @ 1 kHz, typical | –48.5 dBV/Pa (3.8 mV) |
| Maximum SPL1 kHz at 1% THD | 2500 Ω load 155 dB1000 Ω load 151 dB |
| Signal-to-Noise Ratio | 64.5 dB |
| Dynamic Range@ 1 kHz | 2500 Ω load 125.5 dB1000 Ω load 121.5 dB |
| Clipping Level20 Hz to 20 kHz, 1% THD | 2500 Ω load 12.5 dBV1000 Ω load 7.5 dBV |
| Self Noiseequivalent SPL, A-weighted, typical | 29.5 dB SPL-A |
| Common Mode Rejection 20 Hz to 200 kHz | ≥55 dB |
| Frequency Contour Switch | 7 dB of attenuation centered at 400 kHz |
| Connector | Three-pin professional audio (XLR), male, balanced |
| Polarity | Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 |
| Power Requirements | 11–52 V DC phantom power (IEC-61938), 5.4 mA |
| Weight | 1.036 lbs (470 g) |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
