Tannoy CMS 503DC BM 5" Full Range Ceiling Speaker with Dual Concentric Driver for Installation Applications 240W
Based on an all-new evolution of Tannoy's proprietary Dual Concentric point-source driver, the CMS 503DC BM has been fundamentally re-engineered to deliver wider and more consistent broadband directivity, even greater intelligibility, and a more accurate and linear response.
The new Dual Concentric driver design features revolutionary Omnimagnet™ technology and unique patent-pending Torus Ogive Waveguide™ device, together providing more consistent and controlled directivity along with improved high-frequency response. Improved time-alignment and greater coherence between LF and HF results in a wider sweet spot for enhanced performance both on and off-axis. The re-designed baffle provides a subtle extension to the waveguide effect for additional sonic benefits.
The CMS 503DC BM also features extra clamp extension to accommodate thicker ceiling panels, and a locking design that prevents inadvertent over-screwing. Magnetic grille attachment enables easy removal and fitting for custom painting and tapping changes with grilles now available as either traditional style (inset in bezel) or new Arco™ style which conceals the entire unit for more architect friendly aesthetic appeal.
The CMS 503DC utilizes a 16 ohm driver, making it ideal for use in high-performance low-impedance systems (with optimized performance when used in conjunction with Lab.gruppen LUCIA amplifiers). A low-insertion loss 30 W transformer is included, with convenient front bezel switching for taps at 30 W, 15 W and 7.5 W, with an additional 3.75 W tap for traditional constant voltage systems.
The CMS 503DC BM is supplied with an integral zinc plated steel back-can, ready to install as a single unit and feature an integrated, recessed termination box. The removable locking connector has screw terminals for secure wire termination and loop-thru facility. Strain relief is provided by a clamping mechanism for use with plenum-rated cable or conduit, while new spring-loaded and self-aligning clamps make for even quicker and easier installation. All models are supplied with classic grille, two tile support rails and one C-ring; Arco grille and plaster (mud) ring are available as optional accessories.
| Performance | |
|---|---|
| Frequency Response (-3 dB) | 85 Hz - 50 kHz |
| Transformer Taps (via front rotary switch) | 70 V: 30 W (165 Ohms) / 15 W (330 Ohms) / 7.5 W (660 Ohms) / 3.75 W (1320 Ohms) / OFF & low impedance operation 100 V: 30 W (330 Ohms) / 15 W (660 Ohms) / 7.5 W (1320 Ohms) / OFF & low impedance operation |
| Rated Maximum SPL (2) | Average: 107 dB Peak: 113 dB |
| Nominal Impedance (Lo, Z) | 16 Ohms |
| Recommended Amplifier Power | 120 W @ 16 Ohms |
| Frequency Range (-10 dB) | 74 Hz - 54 kHz |
| System Sensitivity (1 W @ 1 m) | 89 dB (1 W = 4 V for 16 Ohms) |
| Nominal Coverage Angle | 90 degrees conical |
| Power Handling | Average: 60 W Program: 120 W Peak: 240 W |
| Transducers | |
| Dual Concentric point source driver | 1 x 5.0" (130 mm) Dual Concentric driver, using Omnimagnet technology |
| Low Frequency | 1.38" (35 mm) voice coil, treated multi fiber paper pulp cone |
| High Frequency | 0.79" (20 mm) PEI dome |
| Physical | |
| Enclosure | Back Can: Zinc plated steel Baffle: UL 94 V-0 rated ABS Grille: Steel, with weather resistant coating |
| Safety Features | Safety ring located at rear of enclosure for load bearing safety bond |
| Clamping Design | Security toggle clamp. Min / Max clamping range 0.37" (9.5 mm) / 2.36" (60 mm) Recommended clamp torque: 1.5 Nm |
| Backcan Options | Complete with fixed backcan |
| Cable Entry Options | Cable clamp & squeeze connector for conduit up to 22 mm |
| Connectors | Removable locking connector with screw terminals with "loop through" facility |
| Compliance | UL-1480, UL-2043, CE |
| Dimensions | |
| Bezel Diameter | 8.11" (205.9 mm) |
| Front of ceiling to rear of backcan | 7.40" (188.0 mm) |
| Front of ceiling to top of safety loop | 8.08" (205.3 mm) |
| Weights | |
| Weight | 18.08 lbs (8.2 kg) |
| Shipping Weight | 23.16 lbs (10.51 kg) |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
