Audix RAD360 Handheld Wireless Microphone System (Discontinued)
Usually arrives in 5-9 business days.
The Audix W3ADX20i is part of the a RAD360 Wireless System series and is excellent for capturing brass, saxophone and woodwinds. This microphone is compact and easy to attach to the bell of an instrument.
The Audix RAD360 Wireless System is a frequency agile UHF wireless microphone system with 193 selectable frequencies (per system group) and dual tuner, true diversity receivers.
Operating in the UHF band between 614-638 MHz and 638–662 MHz in the USA, and a variety of other frequencies outside the USA, the RAD360 is designed for a wide range of professional applications including live performances, fixed installations, corporate meetings, education and Houses of Worship.
The W3ADX20i wireless system is excellent for sax, brass and woodwinds. The microphone is compact and easy to attach to the bell of an instrument.
General:
ADX20i:
| General | |
|---|---|
| Switchable Frequencies | 193 (per system group of 24 MHz spaced 125 kHz apart) |
| Freq Response | 40 Hz–18 kHz (depending on capsule) |
| Signal To Noise Ratio | >110 dB |
| Compander System | HDX |
| Pilot Tone | 32.768 kHz |
| R360 Receiver | |
| Receiving System | Dual tuners, true diversity receiver |
| Image Rejection | 50 dB nominal, 45 dB minimum |
| Signal-to-noise Ratio | 110 dB @ 30 kHz deviation (IEC-weighted), max modulation 75 kHz |
| Total Harmonic Distortion | 1% (10 kHz deviation at 1 kHz) |
| Sensitivity | 26 dBμV (S/N 60 dB at 5 kHz deviation, IEC-weighted) |
| Intermediate Frequency | 55.875 MHz, 10.7 MHz |
| Audio Output | Unbalanced: 40 mV (at 1 kHz, 10kHz deviation, 10k ohm load) |
| (AF Level set at “0”) | Balanced: 8mV (at 1 kHz, 10kHz deviation, 600 ohm load) |
| Output Connectors | Unbalanced: 1/4” phone jack, Balanced: XLR |
| Nominal Peak Deviation | Balanced: -24 to +18dBu, Unbalanced: -30 to +12dBu (adjustable in 6 dB-steps) |
| Adjacent Channel Rejection | >68 dB |
| Intermodulation Spacing | >68 dB |
| Image Rejection | >72 dB |
| Power Supply | 120V AC 60 Hz; 12-18V DC, 350 mA, with external supply |
| Dimensions (H x W x D) | 1.1" (38 mm) x 8.35" (212 mm) x 6.5" (165 mm) |
| Net Weight | 2.32 lbs (1050 g) |
| B360 Bodypack Transmitter | |
| RF Power Output | 50 mW Max |
| Spurious Emissions | Under federal regulations |
| Input Connector | 3 pin mini-XLR |
| Input Controls | Mic/line switch, and 20 dB potentiometer |
| Current Consumption | 100 mA typical |
| Input Impedance | Mic: 10kOhm Line: 1M Ohm |
| Max Sound Pressure Level | approx. 128–140 dB (depending on mic) |
| Dimensions (H x W x D) | 4" (104 mm) x 2.8" (71.3 mm) x 1" (27 mm) |
| Net Weight | 0.450 lbs (204.5 g) (with battery) |
| ADX-20i Microphone | |
| Transducer Type | Pre- polarized Condenser |
| Frequency Response | 40 Hz - 20 kHz |
| Polar Pattern | Cardioid |
| Output Impedance | 250 ohms |
| Sensitivity | 5.8 mV/ Pa @ 1k (Cardioid) |
| Signal/Noise Ratio (A-weighted) | 65 dB |
| Equivalent Noise Level (A-weighted) | 29 dB |
| Maximum SPL @ .5% THD | 135 dB |
| Connector | Shielded 6’ cable terminating to a miniture 3 pin XLRf |
| Polarity | Positive pressure on diaphragm produces positive voltage on pin2 relative to pin 3 |
| Housing / Finish | Machined Brass |
| Gooseneck | Flexible Steel |
| Length | 1.14" (29 mm) |
| Weight | 0.105 lbs (48 g) |
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.