- Description
Details
The Audix W3310 Combo Wireless System is a RAD360 frequency agile UHF wireless microphone system with 193 selectable frequencies (per system group) and dual tuner, true diversity receivers. The RAD360 is designed for a wide range of professional applications including live performances, fixed installations, corporate meetings and Houses of Worship.
The RAD360 Wireless Systems feature menu driven displays in each component. Both the receiver and the transmitter are synthesizer controlled via Phase Locked Loop (PLL) for stable Radio Frequency (RF) signals. The handheld transmitters are constructed of durable metal. These units feature the legendary OM series dynamic microphones built with Audix's VLM TM capsule technology.
The handheld transmitters utilize a convenient gain setting control to help prevent overload or distortion. The modular design of the threaded microphone head enables the user to change the transmitter mic capsule from one OM Series model to another in a matter of seconds.
The body pack transmitter, constructed of durable ABS composite, is housed in a protective metal cradle. It may be used with lavaliere, headset and specialty instrument microphones.
The combination system allows the user the flexibility of using either a handheld wireless or a lavalier microphone.- Features
Features
- Frequency agile
- Soft-key controls
- Backlit LCD menu driven displays
- Noise squelch circuitry analyzes signal quality
- Surface Acoustic Wave (S.A.W.) filters RF resistance
- Tone key squelch eliminates unwanted noise
- Tuned antennas
- Audio output
- RF level meters
- Audio meters
- Battery power indicators
- Easy to use set and lock function
- Sensitivity adjustment
- Interchangeable head assemblies
- Durable metal housings
- Specification
T360 Handheld Microphone RF Power Output 50 mW Max Spurious Emissions < -54 dBm Battery (Not Included) 2- AA 1.5 V Current Consumption 100 mA typical Battery Life Approximately 12 hours (depending on battery type and usage) Max Sound Pressure Level >140 dB (depending on capsule) Dimensions (Dia x L) 2.1" (53.4 mm) x 9.4" (238.67 mm) Net Weight 0.77 lbs (0.35 kg) ADX10 Miniature Lavalier Transducer Condenser Pilot Tone 32.768 kHz Polar Pattern Cardioid Frequency Response 50Hz to 18KHz Maximum Input Sound Level 130dB Power Requirements Audix Beltpack Transmitters or APS-910 Phantom Power Supply Output Impedance 1000 ohms Output Connectors Mini-XLR Switchable Frequencies 193 (per system group of 24 MHz spaced 125 kHz apart) Signal To Noise Ratio >110 dB Compander System HDX Length 0.98" (25 mm) Net Weight 0.74 oz (21 g) RAD360 Bodypack Type of Input Connector 3 pin mini-XLR Battery Type/Approx. Life 2-AA 1.5V Mute Switch 3-Position Switch On/Mute/Off Level Control Input Level Adjust Antenna Type Internal Dimensions (H x W x D) 4" (104 mm) x 2.8" (71.3 mm) x 1" (27 mm) Net Weight 7.5 oz (212 g) R360 Wireless Receiver Receiving System Dual tuners, true diversity receiver Image Rejection 50 dB nominal, 45 dB minimum Signal-to-Noise Ratio 110 dB @ 30 kHz deviation (IEC-weighted), max modulation 75 kHz Total Harmonic Distortion 1% (10 kHz deviation at 1 kHz) Sensitivity 26 dBμV (S/N 60 dB at 5 kHz deviation, IEC-weighted) <2.5μV Intermediate Frequency 55.875 MHz, 10.7 MHz Audio Output (AF Level Set at “0”) Unbalanced: 40 mV (at 1 kHz, 10kHz deviation, 10k ohm load)
Balanced: 8mV (at 1 kHz, 10kHz deviation, 600 ohm load)Output Connectors Unbalanced: 1/4” phone jack
Balanced: XLRNominal Peak Deviation Balanced: -24 to +18dBu
Unbalanced: -30 to +12dBu (adjustable in 6 dB-steps)Adjacent Channel Rejection >68 dB Intermodulation Spacing >68 dB Image Rejection >72 dB Power Supply 120V AC 60 Hz; 12-18V DC, 350 mA, with external supply Dimensions (H x W x D) 1.1" (38 mm) x 8.35" (212 mm) x 6.5" (165 mm) Net Weight 2.32 lbs (1.05 kg) - Documents
Documents
- In The Box
In The Box
- (1) RAD 360 Receiver
- (1) T363 Handheld Microphone
- (1) ADX10 Minature Lavalier Mic
- (1) PS110R Power Supply
- (2) Antennas
- (1) Rack Mount Kit and Screws
- (1) Padded Carrying Case
- (1) 1/4" - 1/4" Audio Patch Cable
- (1) Screwdriver (for changing settings on the bodypack)
- Reviews
Write Your Own Review






