- Description
Details
Bose RoomMatch Utility RMU208 Small-Format Sound Reinforcement Loudspeaker
For High-Quality Foreground Music, Under-Balcony, Zone Fill And Vocal-Range Floor Monitor ApplicationsThe Bose RoomMatch Utility RMU208 small-format sound reinforcement loudspeaker is intended for use in high-quality foreground music, under-balcony, zone fill, and vocal-range floor monitor applications. The design features a single Bose® EMB2 compression driver to provide mid/ high-frequency voicing similar to that of RoomMatch full-range array modules. Dual 8-inch woofers provide full-range output and a multi-angle enclosure increases mounting flexibility.
Applications:
- Under-balcony and zone fill
- High-quality foreground music
- Stage-front fill
- Vocal-range floor monitor
- Features
Features
- Award-winning RoomMatch sound – now in smaller 2-way point-source designs for high-level foreground music, under-balcony, zone-fill, and vocal-range floor monitor applications
- Bose EMB2 compression driver – for lower distortion and improved vocal clarity compared to conventional foreground/fill models; also provides consistent mid/high sonic character compared to that of RoomMatch full-range and other RoomMatch Utility models
- 90° x 60° constant-directivity high-frequency horn – gives wide, even coverage and may be rotated in enclosure
- 2 x Bose LF8 8-inch woofer – with 2.0-inch extended-excursion voice coil extends response to 70 Hz for lowest vocal range
- Quasi-3-way passive crossover with separate filters for each transducer – provides more consistent frequency and polar response compared to conventional crossover designs
- 70 Hz – 16 kHz frequency response and 126 dB maximum peak SPL – deliver the performance required for most demanding applications
- Flexible mounting with included U-bracket – rear enclosure panel also includes 4 x M8 threaded inserts in 5.0” x 2.75” (127mm x 70mm) pattern to accept third-party accessory mounting brackets
- Specification
System Performance Frequency Response (+/-3 dB) 80 Hz - 16 kHz Frequency Range (-10 dB) 70 Hz - 16 kHz Recommended High-Pass Protection Filter 70 Hz with minimum 12-dB/octave filter Nominal Coverage Pattern (H x V) 90° x 60° (rotatable high frequency horn) Crossover Type Passive; separate bandpass filters per transducer Power Handling (Long-Term Continuous) Bose extended-lifecycle test: 300W
AES transducer test: 400WPower Handling (Peak) Bose extended-lifecycle test: 1200W
AES transducer test: 1600WSensitivity (SPL / 1 W @ 1 m) Bose extended-lifecycle test: 94 dB
AES transducer test: 94 dBCalculated Maximum SPL @ 1 m Bose extended-lifecycle test: 119 dB
AES transducer test: 120 dBCalculated Maximum SPL @ 1 m (Peak) Bose extended-lifecycle test: 125 dB
AES transducer test: 126 dBTransducers Low Frequency 2 x Bose LF8 high-excursion 8-inch woofers (2-inch voice coil) High Frequency 1 x Bose EMB2 extended-midband high-frequency compression driver (2-inch voice coil) Nominal Impedance 8 ohms Physical Finish Two-part spray polyurethane coating, black Grille 18-gauge (1.2 mm) perforated steel, powder-coated finish, black Environmental Indoor use only Connectors 2 x Neutrik® NL4 and 1 x barrier strip, wired parallel Suspension / Mounting 2 x M8 threaded inserts (1 each side) for U-bracket
2 x M8 threaded inserts (1 each side) for vertical yoke mount, 4 x M8 threaded inserts on rear surface (127 x 70 mm, 4-bolt pattern)Dimensions (enclosure only) 9.3" (236 mm) x 27" (686 mm) x 10.5" (267 mm) Weight 37 lbs (16.8 kg) Weight (with U-bracket) 43 lbs (19.5 kg) Shipping Weight 49 lbs (22.2 kg) - Documents
- Reviews
Write Your Own Review