- Description
Details
The V2-212S is a low-profile, dual-driver subwoofer system designed to augment and extend the low frequency output of any VERIS 2 full-range loudspeaker system. Powerful and low in distortion, the V2-212S produces authoritative low frequency output. The result is a deep, but punchy sonic signature that can handle most any musical style with ease. Solidly constructed of cross-laminated birch plywood, this subwoofer provides an accurate acoustic response uncolored by enclosure resonance. Its small size makes it a perfect fit for jazz clubs, bars, restaurants, worship centers, AV presentations, and other applications that require extended bass, but do not have the space available to install larger, bulkier systems.
The enclosure may be suspended from its M10 threaded rigging points, or simply located on the floor. As with all subwoofers, a corner placement is recommended when possible, in order to take advantage of the acoustical boundary effect for the highest possible efficiency. The V2-212S includes Community’s exclusive DYNA-TECH™ driver protection circuitry to protect against abusive operating conditions, and also features Community’s patented Cool-Coil™ heat evacuation technology to minimize cone driver power compression and ensure longterm reliability.
The V2-212S is a versatile performer for applications requiring high quality, high power, and extended low frequency response at a reasonable cost.
- Features
Features
- Low profile design fits tight spaces
- DYNA-TECH driver protection circuitry
- Patented Cool-Coil heat evacuation technology to minimize cone driver power compression
- Eight M10 threaded rigging fittings (four on each end panel)
- Terminal strip and NL4-compatible connectors
- Available in standard black or white finishes
- Specification
Operating Range 37 Hz to 500 Hz (-10 dB) Frequency Response 50 Hz to 125 Hz (-3 dB) Max Input Ratings 300W continuous, 750W program
34.6 volts RMS, 69.3 volts momentary peakSensitivity (1W/1m) 98 dB (50 Hz to 200 Hz) half space Maximum Output 123 dB SPL / 129 dB SPL (peak) Nominal Impedance 4 ohms Minimum Impedance 4.2 ohms @ 110 Hz Nominal –6dB Beamwidth 360° H x 180° V Recommended Signal Processing 40 Hz, 24 dB/octave high pass filter Drivers LF 2 x 12-inch Driver Protection DYNA-TECH protection circuitry Input Connection NL4-compatible locking connector with terminal strip in parallel Controls None Enclosure 18 mm, 11-ply cross-laminated birch Mounting/Rigging Provisions 8 x M10 threaded rigging fittings Finish Catalyzed polyester two-part paint, black or white Grille Powder coated steel, black or white finish Dimensions (H x W x D) 13.9" (354 mm) x 35.9" (912 mm) x 17.9" (455 mm) Weight 70 lbs (31.8 kg) - Documents
Documents
- Reviews
Write Your Own Review