- Description
Details
Community V2-26B Dual 6.5-inch Black Full-Range Loudspeaker
The V2-26B in black is a versatile dual 6.5" two-way full-range loudspeaker designed for distributed and delay sound reinforcement systems. Compact yet powerful, it delivers extended low-frequency and midrange performance compared to the smaller V2-6, making it ideal for cafes, restaurants, shopping centers, airports, and other commercial environments. When paired with a subwoofer such as the V2-212S, the V2-26B achieves broad-spectrum, high-fidelity sound that far exceeds its modest size.
In larger venues like auditoria, theaters, and houses of worship, the V2-26B excels as a delay or fill speaker, ensuring consistent sound levels and tonal balance throughout the space. With a 90° H x 70° V dispersion pattern, frequency-shaded woofers, and a constant-directivity rotatable horn, it provides smooth, controlled coverage. The rotatable horn allows for either vertical or horizontal mounting, while the included yoke bracket with 10° and 20° vertical standoffs enables flexible wall or ceiling installation.
Built for durability and reliability, the V2-26B features Dyna-Tech driver protection circuitry, a ferrofluid-treated HF driver for heat dissipation, and Carbon Ring Cone Technology for increased piston area and excursion capability. Equipped with a terminal strip and NL4-compatible connectors, and finished in a discreet black enclosure, it is a dependable solution for distributed audio, supplemental PA, and fixed installations. Fully compatible with Community ALC404D controllers, with higher-power ALC models also supported.
- Features
Features
- Dual 6.5" two-way full-range loudspeaker in black
- 90° H x 70° V coverage in vertical orientation
- Constant-directivity rotatable square horn for flexible dispersion
- Frequency-shaded woofers for smooth vertical pattern control
- Dyna-Tech driver protection circuitry for reliability
- Ferrofluid-treated HF driver improves heat dissipation
- Carbon Ring Cone Technology increases LF piston area and excursion
- Terminal strip and NL4-compatible connectors for versatile wiring
- Yoke bracket included with 10° and 20° vertical standoffs for wall or ceiling mounting
- 5-year warranty
- Specification
Operating Range 70 Hz to 18 kHz (-10 dB) Frequency Response 90 Hz to 16 kHz (±3 dB) Max Input Ratings 200W continuous, 500W program
28.3 volts RMS, 56.7 volts momentary peakSensitivity (1W/1m) 92 dB (100 Hz to 12.5 kHz) free space Maximum Output 115 dB SPL / 121 dB SPL (peak) Nominal Impedance 4 ohms Minimum Impedance 3.5 ohms @ 220 Hz Nominal –6 dB Beamwidth 90° H x 70° V (in vertical position) Crossover Frequency 1.3 kHz Recommended Signal Processing 80 Hz, 24 dB/octave Butterworth high pass filter Drivers LF 2 x 6.5" cone
HF 1 x 1"Driver Protection DYNA-TECH protection circuitry Input Connection NL4-compatible locking connector with terminal strip in parallel Enclosure Trapezoidal (22.5° included angle) 18 mm, 11-ply cross-laminated birch Mounting/Rigging Provisions 9 x M6 threaded rigging fittings
4 x M6 threaded fittings for third-party suspension productsFinish Catalyzed polyester two-part paint, black Grille Powder coated steel, black finish Dimensions (H x W x D) 22.5" (573 mm) x 9.8" (249 mm) x 10.1" (258 mm) Weight (incl. Bracket) 28.1 lbs (12.7 kg) Shipping Weight 38.1 lbs (17.28 kg) - Documents
Documents
- Reviews
Write Your Own Review













