The V2-28W in white is a dual 8" two-way full-range loudspeaker engineered for use in distributed and delay sound systems. Compact yet powerful, it delivers extended low-frequency and midrange performance beyond that of the V2-8, making it an excellent choice for cafes, restaurants, shopping centers, airports, and other commercial installations. When paired with a subwoofer like the V2-212S, the V2-28W provides broad-spectrum, high-fidelity sound that exceeds expectations for its modest size.
In auditoria, theaters, and houses of worship, the V2-28W excels as a delay or fill loudspeaker, ensuring consistent audio coverage from front to rear seating areas. Its 90° H x 70° V dispersion, constant-directivity rotatable square horn, and frequency-shaded woofers deliver smooth, controlled sound reproduction. The user-rotatable horn supports both vertical and horizontal mounting, while the included yoke bracket with 10° and 20° vertical standoffs enables versatile wall or ceiling installation.
Durably built, the V2-28W features Dyna-Tech driver protection circuitry, a ferrofluid-treated HF driver, and Carbon Ring Cone Technology for greater piston area and excursion capability. With its terminal strip and NL4-compatible connectors, flexible mounting options, and attractive white finish, the V2-28W is ideal for distributed sound reinforcement or supplemental PA systems. Fully compatible with Community ALC404D controllers, higher-power ALC models may also be used safely.
| Operating Range | 60 Hz to 18 kHz (-10 dB) |
|---|---|
| Frequency Response | 90 Hz to 16 kHz (±3 dB) |
| Max Input Ratings | 300W continuous, 750W program 34.6 volts RMS, 69.2 volts momentary peak |
| Sensitivity (1W/1m) | 94 dB (100 Hz to 12.5 kHz) free space |
| Maximum Output | 119 dB SPL / 125 dB SPL (peak) |
| Nominal Impedance | 4 ohms |
| Minimum Impedance | 3.4 ohms @ 200 Hz |
| Nominal –6 dB Beamwidth | 90° H x 70° V (in vertical position) |
| Crossover Frequency | 1.3 kHz |
| Recommended Signal Processing | 70 Hz, 24 dB/octave Butterworth high pass filter |
| Drivers | LF 2 x 8" cone HF 1 x 1" |
| Driver Protection | DYNA-TECH protection circuitry |
| Input Connection | NL4-compatible locking connector with terminal strip in parallel |
| Enclosure | Trapezoidal (22.5° included angle) 18 mm, 11-ply cross-laminated birch |
| Mounting/RiggingProvisions | 9 x M6 threaded rigging fittings 4 x M6 threaded fittings for V-HSS 4 x M8 for third-party suspension products |
| Finish | Catalyzed polyester two-part paint, white |
| Grille | Powder coated steel, white finish |
| Dimensions (H x W x D) | 25.5" (649 mm) x 11.3" (287 mm) x 11.7" (298 mm) |
| Weight (incl. Bracket) | 36.7 lbs (16.7 kg) |
| Shipping Weight | 46.7 lbs (21.18 kg) |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
