- Description
Details
The V2-28 is a two-way, full-range loudspeaker system suitable for use in a wide variety of fixed installations. This versatile unit is ideal for distributed systems such as those found in cafés, restaurants, shopping centers and airports. With its powerful dual cone drivers, the V2-28 provides additional low frequency and midrange output over that of its sister product, the V2-8. When paired with a subwoofer such as the V2-210S, a V2-28 system will produce high-fidelity, broad spectrum sound that belies its modest size. In addition to distributed systems, the V2-28 is an excellent choice for ancillary delay applications. When used to augment a front-of-house system in venues such as auditoria, theaters and houses of worship, delay loudspeakers can significantly even out the difference in sound pressure level from the front of the room to the rear of the room. Units may be positioned for underbalcony fill, overbalcony fill, or simply placed towards the rear of the seating areas. By deploying V2-28 loudspeakers in such a manner, the system designer will have far greater control over relative levels and relative tonal response when commissioning and equalizing the installation. The V2-28 may be mounted to a wall or ceiling surface using its included yoke bracket, suspended from its M6 threaded rigging points, or installed using a third-party mounting device. It includes a rotatable horn design that allows optimal dispersion in either vertical or horizontal mounting positions.
An optional model with a built-in 200W autoformer with taps at 200W, 100W, 50W and 25W (model V2-28T) is also available from the factory.- Features
Features
- DYNA-TECH™ driver protection circuitry
- Ferrofluid-treated HF driver for improved heat dissipation
- Carbon Ring Cone Technology provides 30% more piston area with increased excursion capability
- Constant-directivity rotatable square horn
- Frequency shaded woofers for smooth vertical pattern control
- Terminal strip and NL4-compatible connectors
- Available in standard black or white finishes
- Mounting yoke included with 10° and 20° vertical standoffs
- Optional V2-28T autoformer model for 70V/100V applications
- Specification
Operating Range 60 Hz to 18 kHz (-10 dB) Frequency Response 90 Hz to 16 kHz (±3 dB) Max Input Ratings 300W continuous, 750W program 34.6 volts RMS, 69.2 volts momentary peak Sensitivity (1W/1m) 94 dB (100 Hz to 12.5 kHz) free space Maximum Output 119 dB SPL / 125 dB SPL (peak) Nominal Impedance 4 ohms Minimum Impedance 3.4 ohms @ 200 Hz Nominal –6 dB Beamwidth 90° H x 70° V (in vertical position) Crossover Frequency 1.3 kHz Recommended Signal Processing 70 Hz, 24 dB/octave Butterworth high pass filter Drivers LF 2 x 8" cone, HF 1 x 1" Driver Protection DYNA-TECH protection circuitry Input Connection NL4-compatible locking connector withterminal strip in parallel Controls None Enclosure Trapezoidal (22.5° included angle)18 mm, 11-ply cross-laminated birch Mounting/RiggingProvisions 9 x M6 threaded rigging fittings
4 x M6 threaded fittings for V-HSS
4 x M8 for third-party suspension productsFinish Catalyzed polyester two-part paint, black or white Grille Powder coated steel, black or white finish Dimensions (H x W x D) 25.5" (649 mm) x 11.3" (287 mm) x 11.7" (298 mm) Weight (incl. bracket) 36.7 lbs (16.7 kg) Shipping Weight 44 lbs (20 kg) - Documents
Documents
- Reviews
Write Your Own Review