- Description
Details
The PVX™12 is a two-way sound reinforcement system based on a heavy-duty 12" woofer and a RX™14 titanium diaphragm dynamic compression driver mounted on a 100 by 50 degree coverage Quadratic Throat Waveguide™. It’s sleek modern appearance coupled with excellent performance offer an outstanding package.
The lightweight yet rugged injection-molded plastic enclosure with molded-in stand mount cup facilitates portable use for live music or PA sound. The trapezoidal cabinet has three handles for ease of portability, and an extra 45-degree angled section on the right side to allow use as a floor monitor. Five sets of flying/ mounting points, two on the top, two on the bottom, and one on the side, with a total of 16 cabinet inserts, provide for the ultimate in installation flexibility. A black powder coated perforated steel grille provides driver protection and a professional appearance.
The heavy-duty 12" woofer has a 2 3/8" voice coil diameter, and a 50 oz. magnet for 200 watts continuous worth of chest-pounding bass. The RX 14 compression driver tweeter is coupled to a Quadratic Throat constant directivity waveguide, covered under US patent #6,059,069 with smooth, even response, low distortion and good high frequency dispersion. This horn has an asymmetrical vertical polar response, aiming the main energy lobe down 10°, so it is aimed at the audience, instead of over their heads. This helps reduce ceiling reflections for greater clarity and gain before feedback.
The PVX 12 speaker system is rated at 400W program power handling, and the full crossover network includes high voltage film capacitors, high current inductors, and high frequency driver protection for clear punchy sound, and excellent long-term reliability. A 4-pin twist-lock connector and a ¼" phone jack input make hook-up a breeze.
The cabinet of the PVX 12 speaker system has multiple mounting fly points, providing outstanding versatility in permanent install use. A pair of M10 inserts is molded-in on the top, and a pair on the bottom, and a set of four M8 inserts is available on the top, on the bottom, and on the right side in the handle recess. This is a total of 16 mounting inserts in all. Most of these inserts have substantial retaining hardware on the inside of the plastic cabinet, so that the insert would have to pull out an entire chunk of the cabinet to come free, providing a more reliable and safe mode of mounting the cabinet.
- Features
Features
- Two-way sound reinforcement enclosure
- 12" heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet
- RX 14 compression driver, with 1.4 inch titanium diaphragm
- 400W program/800W peak power handling
- Patented Quadratic Throat Waveguide™ technology, 100 by 50 degree coverage
- Asymmetrical horn aims the sound down 10°, at the audience, not over their heads
- Crossover network for driver protection and EQ
- High frequency driver protection
- Durable plastic injection-molded trapezoidal enclosure
- Extra angled section on right side allows floor monitor use
- Full-coverage heavy-duty perforated steel grilles, with powder coat finish
- Pole mount molded-In
- Top, bottom and right side flying point inserts
- Specification
Frequency Range 48 Hz to 21 kHz (1 meter on-axis, swept-sine in half space environment) Frequency Response 60 Hz to 20 kHz (±3 dB) (1 meter on-axis, swept-sine in anechoic environment) Usable Low Frequency Limit 51 Hz (-10 dB point anechoic) Power Rating (Program) 400W Peak Power Capacity (Peak) 800W Sound Pressure Level 96 dB SPL, (2.83V input) 1 Watt, 1 meter in anechoic environment Maximum Sound Pressure Level (1 meter) 119 dB SPL continuous
125 dB SPL peakRadiation Angle Nominal: 100° horizontal X 50° vertical (measured at -6dB point of polar response) Transducer Complement Heavy-duty 12" woofer with 2 3/8" voice coil & 50 oz. magnet
RX™14 1.4” titanium diaphragm dynamic compression driverBox Tuning Frequency 62 Hz Crossover Frequency (Internal Passive) 2.8 kHz Impedance (Z) Nominal: 8Ω
Minimum: 6.7ΩInput Connections One four-pin twist-lock connector paralleled with a 1/4" phone jack Dimensions (H x W x D) 24.50" (622 mm) x 16.10" (409 mm) x 15" (381 mm) Net Weight 37 lbs (16.8 kg) - Documents
Documents
- Reviews
Write Your Own Review