- Description
Details
Octasound Omnidirectional Speakers - Sound Above All
For high quality, economical speakers for your arena, gymnasium, recreational facility or skating rink public address system look to Octasound to provide you with the ultimate solution. When you’re dealing with a large space, reverberation can seriously affect clarity and speech intelligibility. Octasound omnidirectional speakers are your best approach for voice and music.
The Principle
4 discrete horns project sound in all directions to give you true projected not reflected sound. The large woofer radiates bass. Incredible efficiency gives you the headroom needed to keep things crystal clear. With over a quarter of a century of proven design and manufacturing experience, Octasound is the speaker of choice. Efficiency, quality, flexibility and reliability are the cornerstones of our business.
Low Cost
One Octasound speaker will do the job of several conventional speakers. Tulsa Expo Center used 12 Octasound speakers instead of 200 conventional speakers to cover a huge 448,000 sq ft space. You save on hardware and you save on installation.
Amazing Sound Quality
Over and over again customers report that they can hardly believe how good the Octasound speakers sound. This applies to music as well as announcements.Solid Durability
The Octasound speaker was born in the crucible of Canadian hockey arenas where cold, moisture and stray slap shots would quickly destroy a speaker that wasn't built to take the punishment. Specific models use a polyurethane elastomer finish similar to the bottoms of your work boot. The finish is applied inside the cabinet as well to protect against any moisture that causes normal painted finished cabinets to swell.
The Octasound SP810A loudspeaker with 360º x 180º coverage is an octagonal shaped speaker containing one 10" low frequency driver with a 2" - 8 ohm voice coil and 34 ounce magnet. The speaker also encloses four high frequency 4.5" x 4.5" wide dispersion exponential compression horns & drivers with 1" voice coils, 1" throat diameter and a magnet weight of 10 ounces. The speaker sensitivity is 104 dB per watt per meter and contains a crossover point of 2 kHz ±15% complete with thermal protection and with an impedance of 8 ohms. This speaker is manufactured from ¾" wood composite and sealed with an industrial textured finish. The grill is made of plastic and is impact resistant. All exposed metal hardware is stainless steel or zinc plated. Four 1.25" eye nuts are provided for mounting. The complete speaker weighs a maximum of 44 lbs., with the following dimensions: top width 18 7/8", bottom width 13" and height 10" + 1.75" for mounting hardware.- Features
Features
- Up to 10,000 Square Feet sound coverage
- Scratch Resistant Rugged 3 Stage Painted Finish.
- 4 Suspension Points - Ready to Hang right out of the box
- Long Lasting Performance, extremely durable components
- 4 High Compression Horn Drivers, 1 Woofer 10"
- Manufactured in North America using Eminence components
- Specification
Frequency Response 40 Hz to 20 kHz ± 10 dB (on axis) Optimum Power 50 to 150 watts RMS total Power Handling 250 watts RMS total, 500 watts peak Impedance 8 ohms nominal Dispersion 360º Horizontal, 180º Vertical Sensitivity 99 dB/watt/meter on axis Temperature Range -10ºC to 55ºC (14ºF to 131ºF) Humidity Range 0% to 80% Non Condensing Weight 44 lbs Material Exterior Treated Wood Composite Panel Mounting Hardware Four 1 1⁄2” Eye Nuts, 3⁄4” I.D. Eye 1⁄4 x 20 Thread Coverage 360° x 180° — 10,000 sq. ft. (80 x 125 ft.) approx. Woofer / Midrange 10", 50 oz Magnets, 2" Voice Coil Horns (4) 5 x 5 Glass Filled ABS Drivers Exponential Compression 10 oz. Magnets, 1" Voice Coils Dimensions (H x W) 10" (254 mm) x 17.5" (444.5 mm) Shipping Dimensions (H x W x D) 14" (356 cm) x 20" (508 mm) x 20” (508 mm) Weight 44 lbs (20 kg) Shipping Weight 52 lbs (21.8 kg) - Reviews
Write Your Own Review