Search results for 'volume control'
-
Stewart Audio DSP100-1-CV-D Mono DSP and Dante Network Enabled Amplifier
The Stewart Audio DSP100-1-CV-D is an affordable, single-channel, 70V/100V, 1/2 rack amplifier delivering 100W audio power, with built-in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications. The DSP100-1-CV-D supports Dante audio.
-
Lab Gruppen LUCIA 120/1-70 Power Amplifier
With the Lab Gruppen LUCIA 120/1-70 Power Amplifier, power, limiting, control and I/O are conveniently placed where needed, offering a cost-efficient and scalable solution that often eliminates the complications and added costs of a centralized equipment room.
-
Lab Gruppen LUCIA 120/2 Power Amplifier
The Lab Gruppen LUCIA 120/2 incorporates a digital front end with a 2 x 2 Mix Matrix and comprehensive DSP features.
-
Lab Gruppen LUCIA 240/2 Power Amplifier
The Lab.gruppen LUCIA 240/2 has been designed and engineered for quick installation and easy setup.
-
Stewart Audio DSP100-2-LZ-D 2-Channel DSP Enabled Amplifier 2 x 100W @ 4/8 Ohms Dante Network Enabled
The Stewart Audio DSP100-2-LZ-D is an affordable, 2 channel, 4/8 Ohm, 1/2 rack amplifier delivering 100W per channel with built-in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications. The DSP100-2-LZ-D supports Dante™ audio.
-
QSC ISA300Ti 2-Channel Commercial Power Amplifier with 25, 70, 100 Volt Outputs
The QSC ISA300Ti 2 Channel Power Amplifier is designed to meet the needs of sound system designers and contractors worldwide. Versatile loading options and a comprehensive set of features make the ISA300Ti a rugged, cost-effective power solution for any permanently installed sound system.
-
Pure Resonance Audio RZMA120BT 4 Zone 120W Commercial Rack Mount Mixer Amplifier with 4 x 120W 4 Ohm, 70V/100V and Bluetooth
Free Shipping!The Pure Resonance Audio RZMA120BT is a powerful 4-zone commercial mixer amplifier with built-in MP3, FM tuner, Bluetooth, and recording features. With 4 x 120-watt output at 4 Ohm, 70, and 100 Volts, it offers advanced matrix technology for flexible zone selection. It includes a 1-watt 8-ohm monitor channel and supports remote microphone paging via Cat5. An IR remote allows easy volume and source control.
WHILE SUPPLIES LAST! Get a FREE PMZ16 Paging Microphone with the Purchase of Any RZMA Series Multi-Zone Mixer AmplifierList $1,439.99Price $1,199.99Savings $240.00 (17%) -
QSC ISA500Ti 2 Channel Commercial Power Amplifier 25, 70, 100 Volt Outputs
The QSC ISA500Ti 2 Channel Power Amplifier is designed to meet the needs of sound system designers and contractors worldwide. Versatile loading options and a comprehensive set of features make the ISA500Ti a rugged, cost-effective power solution for any permanently installed sound system.
-
Ashly Audio 4.8SP Protea DSP 4x8 System Processor
The Ashly 4.8SP DSP Loudspeaker System Processor is a three input/six output digital signal processor capable of precise control of a broad range of audio functions. The front panel interface allows quick access to all control parameters by offering dedicated function buttons, eliminating the need for hidden sub-menus.
-
Listen Tech LW-150P-02-D Listen Everywhere 2-Channel Wi-Fi Audio Server with Dante
The Listen Everywhere LW-150P is an affordable way to deliver 2 Dante® audio channels to audiences of up to 1000 users. The rear panel Dante input allows for easy audio routing and management via Dante Controller® software. -
Crown CDi 1000 Power Amplifier 2-Channel 500W @ 4Ω, 70V/140V Commercial Installation Amplifier
The Crown CDi 1000 is a professional two-channel power amplifier designed and built for installed sound applications. Extremely versatile; rated for 2Ω, 4Ω, 8Ω loads and 70V rms/140V rms outputs with accurate, uncolored sound with very low distortion for the best in music and voice reproduction.
-
QSC ISA800Ti 2 Channel Power Amplifier
The QSC ISA800Ti 2 Channel Power Amplifier is designed to meet the needs of sound system designers and contractors worldwide. Versatile loading options and a comprehensive set of features make the ISA800Ti a rugged, cost-effective power solution for any permanently installed sound system.
-
Audio-Technica ATUC-50CU Control Unit
The ATUC-50CU has multiple modes that allow the system to adapt to any discussion situation, including Free Talk mode, Request to Talk mode, Full Remote mode, and various override settings.
-
Furman F1500-UPS Uninterruptible Power Supply 1500VA Battery Backup and Power Conditioner
The Furman F1500-UPS offers your system unparalleled battery back-up technology, created from the ground up to meet the exacting demands of the world’s most sensitive audio, video and control systems!
-
Crown CDi 2000 Power Amplifier Two-Channel 800 Watts @ 2Ω, 4Ω, 8Ω and 70V/140V Commercial Installation Amplifier
The Crown CDi 2000 power amplifier is a professional tool designed and built for installed sound applications. Extremely versatile; rated for 2Ω, 4Ω, 8Ω loads and 70Vrms/140Vrms outputs. The Crown CDi series amplifiers include four models which are identical except for output power: CDi 1000, CDi 2000, CDi 4000, and CDi 6000.
-
Bosch CCSD-CURD CCS 1000 D Control Unit Recorder DAFS
The Control Unit is the main component of the CCS 1000 Digital Discussion System. It supplies DC power to all connected Discussion Devices and monitors and controls the discussion system.
List $2,507.00Price $2,166.05Savings $340.95 (14%) -
Crown CDi 4000 Power Amplifier 2-Channel, 1200W @ 4Ω, 70V/140V
The Crown CDi 4000 Power Amplifier is a professional tool designed and built for installed sound applications. Extremely versatile; rated for 2Ω, 4Ω, 8Ω loads and 70Vrms/140Vrms outputs. The Crown CDi series amplifiers include four models which are identical except for output power: CDi 1000, CDi 2000, CDi 4000, and CDi 6000.
-
Biamp Devio SCX 400 Conference Room Hub for up to 4 Microphones
The Biamp Devio SCX™ 400 is a conference room hub compatible with Biamp's network audio and control devices. It features enough onboard acoustic echo cancellation and processing to handle up to 4 of Biamp's Parlé™ Microphones
-
Crown CDi 6000 Power Amplifier 2-Channel 2100W @ 4Ω, 70V/140V
The Crown CDi 6000 Power Amplifier is a professional tool designed and built for installed sound applications. Extremely versatile; rated for 2Ω, 4Ω, 8Ω loads and 70Vrms/140Vrms outputs. The Crown CDi series amplifiers include four models which are identical except for output power: CDi 1000, CDi 2000, CDi 4000, and CDi 6000.
-
Biamp Devio SCX 800 Conference Room Hub for up to 8 Microphones
The Biamp Devio SCX™ 800 is a conference room hub compatible with Biamp's network audio and control devices. It features enough onboard acoustic echo cancellation and processing to handle up to 8 of Biamp's Parlé™ Microphones
-
Atlas Sound IP108-D-CS GLOBALCOM IP Announcement Control System with 8 Dante Message Channels
The Atlas IP116-D-CS Announcement Control System (aka ACS) is the heart of AtlasIED's next-generation GLOBALCOM®. IP enterprise-wide communications management system. It manages the flow of announcements and messages between network endpoints such as digital communication stations, zone controllers, network power amplifiers, IP-based speakers and other types of IP endpoints.
-
Atlas Sound IP108-CS GLOBALCOM IP Announcement Control System with 8 CobraNet Message Channels
The Atlas IP108-CS Announcement Control System (aka ACS) is the heart of AtlasIED's next-generation GLOBALCOM®.IP enterprise-wide communications management system. It manages the flow of announcements and messages between network endpoints such as digital communication stations, zone controllers, network power amplifiers, IP-based speakers and other types of IP endpoints.
-
Atlas Sound IP116-D-CS GLOBALCOM IP Announcement Control System with 16 Dante Message Channels
The IP116-D-CS Announcement Control System (aka ACS) is the heart of AtlasIED's next-generation GLOBALCOM®.IP enterprise-wide communications management system. It manages the flow of announcements and messages between network endpoints such as digital communication stations, zone controllers, network power amplifiers, IP-based speakers and other types of IP endpoints.
-
Atlas Sound IP116-CS GLOBALCOM IP Announcement Control System with 16 CobraNet Message Channels
The Atlas IP116-CS Announcement Control System (aka ACS) is the heart of AtlasIED's next-generation GLOBALCOM®. IP enterprise-wide communications management system. It manages the flow of announcements and messages between network endpoints such as digital communication stations, zone controllers, network power amplifiers, IP-based speakers and other types of IP endpoints.