Search results for '%22anchor audio AN-135%2B%22'
-
Stewart Audio DSP100-1-CV-D Mono DSP and Dante Network Enabled Amplifier
The Stewart Audio DSP100-1-CV-D is an affordable, single-channel, 70V/100V, 1/2 rack amplifier delivering 100W audio power, with built-in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications. The DSP100-1-CV-D supports Dante audio.
-
ART MX225 Dual Source 5 Zone Distribution Mixer
The ART MX225 zone mixer is designed for remote volume control of multiple amplifiers or powered speakers in a distributed audio system. Two stereo sources are available to each of five output zones.
List $259.99Price $209.99Savings $50.00 (19%) -
Audio-Technica ATUC-50 4 Person Portable Digital Discussion System with Built-in WAV and MP3 Recorder
Featuring easy-to-use, plug-and-play functionality, the ATUC-50 Digital Discussion System features easy-to-use, plug-and-play functionality, the ATUC-50 4 person digital discussion system offers reliable, clear and intelligible communication to significantly increase meeting efficiency and effectiveness. The ATUC-50DU has a 3-pin XLRF-type input for use with ATUC-M43H or ATUC-M58H microphones. Up to 50 ATUC-50DU discussion units can be connected, in either daisy chain or ring topology, to each ATUC-50CU control unit.
-
Denon Professional DN-300BR Rackmount Bluetooth Receiver
The Denon DN-300BR is a 1RU Bluetooth® 4.0 audio receiver with professional-grade audio outputs enabling the user to add wireless stereo Bluetooth® audio connectivity to any professional audio system.
-
Yamaha SWP1-8 Audio Network Switch
The Yamaha SWP1-8 network switch equipped with eight etherCON ports and two option slots.
-
Bosch PRS-1AIP1 IP Audio Interface
The Bosch PRS‑1AIP1 is a universal, IP‑based audio device supporting VoIP and Audio over IP applications. It is an ideal solution for bridging audio and contact closures over long distance LAN and WAN networks, e.g. in shopping malls, tunnels, in and between railway stations.
List $2,046.00Price $1,767.74Savings $278.26 (14%) -
Audio-Technica ATUC-50CU Control Unit
The ATUC-50CU has multiple modes that allow the system to adapt to any discussion situation, including Free Talk mode, Request to Talk mode, Full Remote mode, and various override settings.
-
Yamaha SWP1-8MMF Audio Network Switch
The Yamaha SWP1-8MMF network switch is equipped with eight etherCON ports, one opticalCON port, and one option slot.
-
Yamaha SWP1-16MMF Audio Network Switch
A simple switch setting is all it takes to optimize SWP1 series network switches for Dante operation, and a dedicated Windows application provides “network visibility” for comprehensive monitoring and control.
-
Biamp TesiraFORTE AI Digital Audio Processor
The Biamp TesiraFORTE AI is a digital audio server with 12 analog inputs and 8 analog outputs and includes up to 8 channels of configurable USB audio.
-
Biamp TesiraFORTE CI Digital Audio Processor
The Biamp TesiraFORTÉ CI is a digital audio server with 12 analog inputs and 8 analog outputs and includes Sona™ Acoustic Echo Cancellation (AEC) technology on all 12 inputs.
-
Biamp TesiraFORTE VT Digital Audio Server
The TesiraFORTÉ® VT is a digital audio server with 12 analog inputs with Acoustic Echo Cancellation (AEC) technology and 8 analog outputs.
-
Ashly Audio ne24.24M 4x8 Network-Enabled Audio Matrix Processor with Protea DSP (4 Input x 8 Out)
The Ashly ne24.24M 4x8 DSP Matrix Processor uses modular expansion cards to provide up to 24-channels of audio matrixing and processing. The base unit offers a 4-input/4-output configuration. Each input and output expansion card has an individual DSP processor allowing you to expand the total input or output.
-
Ashly Audio ne24.24M 8x4 Network-Enabled Audio Matrix Processor with Protea DSP (8 Input x 4 Out)
The Ashly ne24.24M 8x4 DSP Matrix Processor uses modular expansion cards to provide up to 24-channels of audio matrixing and processing. The base unit offers a 4-input/4-output configuration. Each input and output expansion card has an individual DSP processor allowing you to expand the total input or output.
-
Ashly Audio ne24.24M 12x4 Network-Enabled Audio Matrix Processor with Protea DSP (12 Input x 4 Out)
This Network Enabled (NE) processor offers ease of use, setup and control using standard 10/100 Ethernet protocol and Protea NE Software. No special outboard control units are needed.
-
Ashly Audio ne24.24M 12x8 Network-Enabled Audio Matrix Processor with Protea DSP (12 Input x 8 Out)
When your install requires input/output matrixing with signal processing it doesn't get much easier than programming your channels using Protea™ ne Software on your PC. The ne24.24M 16x8 uses modular expansion cards to provide up to 24-channels of audio matrixing and processing.
-
Ashly Audio ne24.24M 8x16 Network-Enabled Audio Matrix Processor with Protea DSP (8 Input x 16 Out)
When your install requires input/output matrixing with signal processing it doesn't get much easier than programming your channels using Protea™ ne Software on your PC. The ne24.24M 8x16 uses modular expansion cards to provide up to 24-channels of audio matrixing and processing.
-
Ashly Audio ne24.24M 16x8 Network-Enabled Audio Matrix Processor with Protea DSP (16 Input x 8 Out)
When your install requires input/output matrixing with signal processing it doesn't get much easier than programming your channels using Protea™ ne Software on your PC. The ne24.24M 16x8 uses modular expansion cards to provide up to 24-channels of audio matrixing and processing.
-
Ashly Audio ne24.24M 4x20 Network-Enabled Audio Matrix Processor with Protea DSP (4 Input x 20 Out)
The Ashly ne24.24M 4x20 DSP Matrix Processor uses modular expansion cards to provide up to 24-channels of audio matrixing and processing. The base unit offers a 4-input/4-output configuration. Each input and output expansion card has an individual DSP processor allowing you to expand the total input or output.
-
Williams Sound IR+ Infrared Modulator Control Center
The Williams Sound IR+ Control Center provides audio over Wi-Fi and Infrared. Infrared is best used for assistive audio in large spaces, or for secured audio transmission within a room. Connect the IR M1 to a Wi-Fi multicast router or in-house network you can stream audio over Wi-Fi to the Williams AV WaveCAST app. -
Ashly Audio ne4400 Network-Enabled Protea DSP Processor
Complimentary to Ashly's amplifiers, the Ashly ne4400 DSP Audio Processor offers easy setup and control using standard 10/100 Ethernet protocol and Protea™ ne Software. No special outboard control units are needed.
-
Ashly Audio ne4800 Network-Enabled Protea DSP Processor
Complimentary to Ashly's amplifiers, the Ashly ne4800 DSP Audio Processor offers easy setup and control using standard 10/100 Ethernet protocol and Protea™ ne Software. No special outboard control units are needed.
-
Ashly Audio ne8800 Network-Enabled Protea DSP Processor
Complimentary to Ashly's amplifiers, the Ashly ne8800 DSP Audio Processor offers easy setup and control using standard 10/100 Ethernet protocol and Protea™ ne Software. No special outboard control units are needed.
-
RDL ST-RX2 1x2 Audio Routing Switcher
The RDL ST-RX2 has a single line‑level audio input and two line‑level audio outputs and is part of a group of products in the STICK-ON series from Radio Design Labs. The durable bottom adhesive permits quick, permanent or removable mounting nearly anywhere or it may be used with RDL racking accessories.
List $199.84Price $149.88Savings $49.96 (25%)