Search results for '%22anchor audio AN-135%2B%22'
-
DBX ZonePro 1260M Digital Zone Processor
The DBX 1260m Digital Zone Processor has 12 inputs and 6 outputs as well as an Ethernet control providing a complete suite of signal processing and control for Commercial Audio applications
-
Stewart Audio DSP100-1-CV-D Mono DSP and Dante Network Enabled Amplifier
The Stewart Audio DSP100-1-CV-D is an affordable, single-channel, 70V/100V, 1/2 rack amplifier delivering 100W audio power, with built-in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications. The DSP100-1-CV-D supports Dante audio.
-
DBX ZonePro 640 Digital Zone Processor
The DBX ZonePro 640 provides flexible signal routing, powerful DSP processing and multiple control interfaces for Commercial Audio applications -
DBX ZonePro 641 Digital Zone Processor
The DBX ZonePro 641 provides flexible signal routing, powerful DSP processing and multiple control interfaces for Commercial Audio applications
-
DBX ZonePro 641M Digital Zone Processor
The DBX ZonePRO 641m offers state-of-the-art signal processing you need for a premium PA installation with six inputs and four outputs. -
Bosch PRS-1AIP1 IP Audio Interface
The Bosch PRS‑1AIP1 is a universal, IP‑based audio device supporting VoIP and Audio over IP applications. It is an ideal solution for bridging audio and contact closures over long distance LAN and WAN networks, e.g. in shopping malls, tunnels, in and between railway stations.
List $2,046.00Price $1,767.74Savings $278.26 (14%) -
Ashly Audio ne4400 Network-Enabled Protea DSP Processor
Complimentary to Ashly's amplifiers, the Ashly ne4400 DSP Audio Processor offers easy setup and control using standard 10/100 Ethernet protocol and Protea™ ne Software. No special outboard control units are needed.
-
Ashly Audio ne4800 Network-Enabled Protea DSP Processor
Complimentary to Ashly's amplifiers, the Ashly ne4800 DSP Audio Processor offers easy setup and control using standard 10/100 Ethernet protocol and Protea™ ne Software. No special outboard control units are needed.
-
Ashly Audio ne8800 Network-Enabled Protea DSP Processor
Complimentary to Ashly's amplifiers, the Ashly ne8800 DSP Audio Processor offers easy setup and control using standard 10/100 Ethernet protocol and Protea™ ne Software. No special outboard control units are needed.
-
Ashly Audio ne24.24M 4x8 Network-Enabled Audio Matrix Processor with Protea DSP (4 Input x 8 Out)
The Ashly ne24.24M 4x8 DSP Matrix Processor uses modular expansion cards to provide up to 24-channels of audio matrixing and processing. The base unit offers a 4-input/4-output configuration. Each input and output expansion card has an individual DSP processor allowing you to expand the total input or output.
-
Ashly Audio ne24.24M 8x4 Network-Enabled Audio Matrix Processor with Protea DSP (8 Input x 4 Out)
The Ashly ne24.24M 8x4 DSP Matrix Processor uses modular expansion cards to provide up to 24-channels of audio matrixing and processing. The base unit offers a 4-input/4-output configuration. Each input and output expansion card has an individual DSP processor allowing you to expand the total input or output.
-
Ashly Audio ne24.24M 12x4 Network-Enabled Audio Matrix Processor with Protea DSP (12 Input x 4 Out)
This Network Enabled (NE) processor offers ease of use, setup and control using standard 10/100 Ethernet protocol and Protea NE Software. No special outboard control units are needed.
-
Ashly Audio ne24.24M 12x8 Network-Enabled Audio Matrix Processor with Protea DSP (12 Input x 8 Out)
When your install requires input/output matrixing with signal processing it doesn't get much easier than programming your channels using Protea™ ne Software on your PC. The ne24.24M 16x8 uses modular expansion cards to provide up to 24-channels of audio matrixing and processing.
-
Ashly Audio ne24.24M 16x8 Network-Enabled Audio Matrix Processor with Protea DSP (16 Input x 8 Out)
When your install requires input/output matrixing with signal processing it doesn't get much easier than programming your channels using Protea™ ne Software on your PC. The ne24.24M 16x8 uses modular expansion cards to provide up to 24-channels of audio matrixing and processing.
-
Ashly Audio ne24.24M 4x20 Network-Enabled Audio Matrix Processor with Protea DSP (4 Input x 20 Out)
The Ashly ne24.24M 4x20 DSP Matrix Processor uses modular expansion cards to provide up to 24-channels of audio matrixing and processing. The base unit offers a 4-input/4-output configuration. Each input and output expansion card has an individual DSP processor allowing you to expand the total input or output.
-
OWI MC4 Four-Channel Audio Control Mixer
The OWI MC4 will allow either line or mic level inputs on each channel. It has an additional four sets of level controls to provide a fixed secondary output not affected by any of the changes on the front panel level input controls.
-
Stewart Audio DSP 4x4 Digital Signal Processor
The Stewart Audio DSP 4x4 is a versatile full featured DSP, ideal for small to medium installations where 4 channels are the right amount. It comes with a full array of DSP blocks designed to accept line or mic level (selectable phantom power). The DSP4x4 is designed to optimize the sound quality of multiple zones.
-
Atlas Sound IED1544AIO-D 4 x 4 Analog/Dante I/O Module
The Atlas Sound IED1544AIO-D is a 4-input x 4-output mic/line-level analog pre-amplifier that converts analog audio signals to Dante® network audio. Multiple channels of Dante® network audio can be transported over standard IP networks.
List $979.99Price $785.99Savings $194.00 (20%) -
Atlas Sound TSD-BB22 BlueBridge DSP Audio Processor
The Atlas Sound TSD-BB22 BlueBridge DSP Audio Processor is ideal for system designs that require limited I/O’s, but require a state of the art DSP platform.
List $1,309.99Price $1,049.99Savings $260.00 (20%) -
Atlas Sound TSD-BB44 BlueBridge DSP Audio Processor
The TSDBB44 BlueBridge's compact design can be used as a standalone device to run a sophisticated sound system or as a supplement to an existing system.
List $1,571.99Price $1,260.99Savings $311.00 (20%) -
Ashly Audio 4.8SP Protea DSP 4x8 System Processor
The Ashly 4.8SP DSP Loudspeaker System Processor is a three input/six output digital signal processor capable of precise control of a broad range of audio functions. The front panel interface allows quick access to all control parameters by offering dedicated function buttons, eliminating the need for hidden sub-menus.
-
Williams Sound WF T5 D WaveCAST Assistive Listening System Interface with Dante
The Williams Sound WaveCAST with Dante is a Wi-Fi platform designed for pro-audio applications where high-quality sound is required. It is built on a hardware-based DSP audio system architecture, allowing system optimization to achieve the highest quality experience for the particular audio stream being delivered.
-
Attero Tech unHX2D Dante/AES67 Networked HDMI Audio De-Embedder/Embedder Interface
The Attero Tech unHX2D is a Dante enabled HDMI de-embedder/embedder designed to bridge 2-channel PCM HDMI audio to/from a Dante/AES67 audio network. In addition, the unHX2D includes two line-level analog inputs and outputs that can be independently bridged to/from a Dante/AES67 audio network.
-
Atlas Sound TSD-DAC2I 2-Channel Balance Line Input to Dante Interface
The Atlas Sound TSD-DAC2i is a PoE 2-channel analog pre-amplifier that converts analog audio signals into Dante® digital audio. The TSD-DAC2i can be used for any Analog to Dante® digital audio endpoint but is ideally suited to be used with the Atlas Sound WTSD wall mixer series.
List $503.99Price $404.99Savings $99.00 (20%)