Search results for 'Audio Enhancement SAFE'

The Ashly KLR 3200 high-performance power amplifier is optimized to provide reliable audio performance with sonic perfection. Covering a power range from 1000 to 2500 Watts per channel at 2 ohms the KLR 3200 is perfectly suited for a wide range of sound reinforcement.

The Stewart Audio FLX-E-160-2-CV-D is a 2 channel, 70V/100V, 1/2 rack amplifier delivering 160W per channel with built-in DSP, Ethernet control & reporting, secondary RS-232 control, and remote volume control. The FLX-E-160-2-CV-D amplifier supports Dante™ audio.

The Stewart Audio FLX-E-160-2-LZ-D is a 2 channel, 4/8Ω, 1/2 rack amplifier delivering 160W per channel with built-in DSP, Ethernet control & reporting, secondary RS-232 control, and remote volume control. The FLX-E-160-2-LZ-D amplifier supports Dante™ audio.

The Stewart Audio FLX-E-320-1-CV-D is a single channel, 70V/100V, 1/2 rack amplifier delivering 320W audio power with built in DSP, Ethernet control & reporting, secondary RS-232 control and remote volume control. The FLX-E-320-1-CV-D amplifier supports Dante™ audio.

The Ashly nX 1504 Multi-Mode Power Amplifier is designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.

The TOA DA-250D CU is a 2-Channel Digital Power Amplifier featuring lightweight, compact, high power output, and high efficiency. It delivers 250 W × 2 channels (4 Ω output) using a switching power supply. Each channel is equipped with an independent power section. It can be mounted in an EIA Standard equipment rack.

The nXe 752 networkable amplifier has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. This amplifier uses state of the art, light weight, high power, high efficiency switching technology with active power-factor-correction, developed through years of design and field testing.

The Ashly CA-1.02 amp is designed to excel in performance installations, such as theaters, school auditoriums and Houses of Worship. However, with 70 and 100V direct-drive capability and more integration-friendly features than you'd typically find on many amplifiers, they are also right at home in commercial installations. Push them hard. They can take it.

The nXe 1502 networkable amplifier has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. This amplifier uses state of the art, light weight, high power, high efficiency switching technology with active power-factor-correction, developed through years of design and field testing.

The Lowell PA250A Power Amplifier provides 250 Watts of continuous RMS power directly to an 8 ohm speaker load. It can be used to increase the power capability of a mixer-amplifier, or it can serve as an all-in-one telephone system paging solution.

The Ashly TRA-4075 power amplifier is a 4-channel 2 rack space amplifier that is perfect for low impedance, 25V, 70V or 100V installations with modest power requirements. All TRA Series amplifiers are convection-cooled, so there’s little maintenance after the installation, and no annoying fan noise.

The nX models are designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. The Ashly nX4002 is a 2 channel multi-mode amplifier capable of driving 2 ohm loads at full power.

The Ashly CA-1.52 amp is designed to excel in performance installations, such as theaters, school auditoriums and Houses of Worship. However, with 70 and 100V direct-drive capability and more integration-friendly features than you'd typically find on many amplifiers, they are also right at home in commercial installations. Push them hard. They can take it.

The Ashly nX8002 2-Channel 800W power amplifier with programmable outputs is a Class-D switching amplifier combined with a switch mode power supply. The nX models are designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.

The Crown DCi 2|300 amplifier is designed, engineered and manufactured to the industry’s highest quality standards, and provides system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications.

The CDi DriveCore 2|300 is a 2-channel 300W/ch amp that offers streamlined functionality to work in almost any large sized installation such as cinema, houses of worship, hotels, cruise lines, and more.