Search results for '"anchor audio AN-135+"'

The Ashly ne24.24M 4x8 DSP Matrix Processor uses modular expansion cards to provide up to 24-channels of audio matrixing and processing. The base unit offers a 4-input/4-output configuration. Each input and output expansion card has an individual DSP processor allowing you to expand the total input or output.

The Ashly ne24.24M 8x4 DSP Matrix Processor uses modular expansion cards to provide up to 24-channels of audio matrixing and processing. The base unit offers a 4-input/4-output configuration. Each input and output expansion card has an individual DSP processor allowing you to expand the total input or output.

This Network Enabled (NE) processor offers ease of use, setup and control using standard 10/100 Ethernet protocol and Protea NE Software. No special outboard control units are needed.

When your install requires input/output matrixing with signal processing it doesn't get much easier than programming your channels using Protea™ ne Software on your PC. The ne24.24M 16x8 uses modular expansion cards to provide up to 24-channels of audio matrixing and processing.

The Ashly ne24.24M 4x20 DSP Matrix Processor uses modular expansion cards to provide up to 24-channels of audio matrixing and processing. The base unit offers a 4-input/4-output configuration. Each input and output expansion card has an individual DSP processor allowing you to expand the total input or output.

When your install requires input/output matrixing with signal processing it doesn't get much easier than programming your channels using Protea™ ne Software on your PC. The ne24.24M 8x16 uses modular expansion cards to provide up to 24-channels of audio matrixing and processing.

When your install requires input/output matrixing with signal processing it doesn't get much easier than programming your channels using Protea™ ne Software on your PC. The ne24.24M 16x8 uses modular expansion cards to provide up to 24-channels of audio matrixing and processing.

Complimentary to Ashly's amplifiers, the Ashly ne4400 DSP Audio Processor offers easy setup and control using standard 10/100 Ethernet protocol and Protea™ ne Software. No special outboard control units are needed.

Complimentary to Ashly's amplifiers, the Ashly ne4800 DSP Audio Processor offers easy setup and control using standard 10/100 Ethernet protocol and Protea™ ne Software. No special outboard control units are needed.

Complimentary to Ashly's amplifiers, the Ashly ne8800 DSP Audio Processor offers easy setup and control using standard 10/100 Ethernet protocol and Protea™ ne Software. No special outboard control units are needed.

This Ashly Audio ne4250 four-channel networked-enabled power amplifier is uniquely designed around an energy efficient Class-D platform with a switching power supply and delivers a minimum power of 150 watts RMS per channel into 8 Ohm loads and 250 watts RMS per channel into 4 Ohm loads with all channels operating.

Connecting and controlling an amplifier for networked systems has now been simplified with Ashly’s NE Series amplifiers. This ne4250.70 network enabled four-channel amplifier provides 250W per channel at 70V. Setup and control of this unit is simple with Ethernet connection.

The nXe1.52 Network Power Amplifier is a trust-worthy, network power amplifier that installs and configure into virtually any architecture and sound environment.

The Ashly nXe3.02 is a 2-channel rack mountable multi-mode amplifier capable of driving 2 ohm loads at full power. The nXe3.02 is designed to meet the most demanding live sound environments and fixed audio installations anywhere, performance venues, stadiums, arenas, convention centers as well as schools, storefronts, and worship spaces.

The Ashly nXe3.04 is a 4-channel rack mountable multi-mode amplifier capable of driving 2 ohm loads at full power. The nXe3.04 is designed to meet the most demanding live sound environments and fixed audio installations anywhere, performance venues, stadiums, arenas, convention centers as well as schools, storefronts, and worship spaces.

This Ashly Audio ne4250pe four-channel networked-enabled power amplifier with Protea DSP is uniquely designed around an energy efficient Class-D platform with a switching power supply and delivers a minimum power of 150 watts RMS per channel into 8 Ohm loads and 250 watts RMS per channel into 4 Ohm loads with all channels operating.

The Ashly nXp3.02 is a 2-channel rack mountable multi-mode amplifier capable of driving 2 ohm loads at full power. The nXp3.02 is designed to meet the most demanding live sound environments and fixed audio installations anywhere, performance venues, stadiums, arenas, convention centers as well as schools, storefronts, and worship spaces. The nXp is a Protea DSP amplifier that includes dynamics, gain, EQ, feedback suppression, FIR filters, matrix and auto-mixer, crossover, delay, and more.

The Ashly nXp3.04 is a 4-channel rack mountable multi-mode amplifier capable of driving 2 ohm loads at full power. The nXp3.04 is designed to meet the most demanding live sound environments and fixed audio installations anywhere, performance venues, stadiums, arenas, convention centers as well as schools, storefronts, and worship spaces. The nXp is a Protea DSP amplifier that includes dynamics, gain, EQ, feedback suppression, FIR filters, matrix and auto-mixer, crossover, delay, and more.

This Ashly Audio ne8250 eight-channel networked-enabled power amplifier is uniquely designed around an energy efficient Class-D platform with a switching power supply and delivers a minimum power of 150 watts RMS per channel into 8 Ohm loads and 250 watts RMS per channel into 4 Ohm loads with all channels operating.

Connecting and controlling an amplifier for networked systems has now been simplified with Ashly’s NE Series amplifiers. This ne4250.70pe network enabled four-channel amplifier with DSP provides 250W per channel at 70V. Setup and control of this unit is simple with Ethernet connection and Protea NE software.

Connecting and controlling an amplifier for networked systems has now been simplified with Ashly’s NE Series amplifiers. This ne8250.70pe network enabled eight-channel amplifier with DSP provides 250W per channel at 70V. Setup and control of this unit is simple with Ethernet connection and Protea NE software.

The CDi DriveCore 2|600 is a 2-channel amp that offers streamlined functionality to work in almost any large sized installation such as cinema, houses of worship, hotels, cruise lines, and more.