Search results for '"anchor audio AN-135+"'

The Stewart Audio FLX-E-80-4-CV is a 4 channel, 70V/100V, 1/2 rack amplifier delivering 80W per channel with built-in DSP, Ethernet control & reporting, secondary RS-232 control, and remote volume control.

The Atlas Sound IED1544AIO-D is a 4-input x 4-output mic/line-level analog pre-amplifier that converts analog audio signals to Dante® network audio. Multiple channels of Dante® network audio can be transported over standard IP networks.

The Stewart Audio FLX-E-160-2-CV-D is a 2 channel, 70V/100V, 1/2 rack amplifier delivering 160W per channel with built-in DSP, Ethernet control & reporting, secondary RS-232 control, and remote volume control. The FLX-E-160-2-CV-D amplifier supports Dante™ audio.

The Stewart Audio FLX-E-160-2-LZ-D is a 2 channel, 4/8Ω, 1/2 rack amplifier delivering 160W per channel with built-in DSP, Ethernet control & reporting, secondary RS-232 control, and remote volume control. The FLX-E-160-2-LZ-D amplifier supports Dante™ audio.

The Stewart Audio FLX-E-320-1-CV-D is a single channel, 70V/100V, 1/2 rack amplifier delivering 320W audio power with built in DSP, Ethernet control & reporting, secondary RS-232 control and remote volume control. The FLX-E-320-1-CV-D amplifier supports Dante™ audio.

The Listen Tech LCS-122-01 combines Wi-Fi and IR technologies to give compliant audio coverage PLUS expanded audio coverage to everyone with a Smartphone or tablet.

The Attero Tech unHX2D is a Dante enabled HDMI de-embedder/embedder designed to bridge 2-channel PCM HDMI audio to/from a Dante/AES67 audio network. In addition, the unHX2D includes two line-level analog inputs and outputs that can be independently bridged to/from a Dante/AES67 audio network.

Control your system from any location with this Network Enabled remote control. The neWR-5 is a programmable remote button controller for Ashly Network Enabled amps and processors.

The Atlas Sound TSD-DAC2i is a PoE 2-channel analog pre-amplifier that converts analog audio signals into Dante® digital audio. The TSD-DAC2i can be used for any Analog to Dante® digital audio endpoint but is ideally suited to be used with the Atlas Sound WTSD wall mixer series.

The Ashly FR-8 8-channel DSP network remote fader is a great choice for facilities that use amateur operators for occasional live performances. Mix and match network remotes in a single installation via a standard Cat-5 cable.

The Ashly FR-16 16-channel network remote fader is a great choice for facilities that use amateur operators for occasional live performances. Mix and match network remotes in a single installation via a standard Cat-5 cable.

Shure Control's intuitive design prevents unnecessary learning curves often associated with new technology adoption, and creates an enjoyable and familiar experience for everyone.

The Ashly’s nXp1.54 Network Power Amplifier with Protea DSP, its features lightweight, energy efficient Class D switching amplifier technology combined w/ multiple independent power supplies that provide increased performance, reliability.

The Atlas Sound IPUSBD-16 is a Dante™ network audio device that provides 16x16 input/output channels of digital audio to/from a USB port of a host computer to Ethernet.

The Bose® ControlSpace® Fixed-I/O Dante™ Network Card provides 16 input and 16 output channels of low-latency digital audio using the Dante™ audio networking solution from Audinate®.

The Attero Tech unDIO2x2+ I/O interface is a 2in/2out, cost-effective way to add up to two channels (in and out) of Dante audio to any Dante-based networked audio system. The small form factor and PoE power capability make it easy to put Dante connectivity wherever it's needed - near the audio source or sink thereby eliminating costly and interference prone analog wiring.

The nXe 752 networkable amplifier has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. This amplifier uses state of the art, light weight, high power, high efficiency switching technology with active power-factor-correction, developed through years of design and field testing.

The nXe 754 networkable amplifier has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. This amplifier uses state of the art, light weight, high power, high efficiency switching technology with active power-factor-correction, developed through years of design and field testing.

The nXe 1504 networkable amplifier has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. This amplifier uses state of the art, light weight, high power, high efficiency switching technology with active power-factor-correction, developed through years of design and field testing.

The TouchMix-30 Pro has the features and functionality that will satisfy the most demanding professional while also providing an intuitive workflow that delivers great results, quickly and easily, to users at every level of experience.

The AtlasIED DNA2404CL amplifier is an integral part of the IED GLOBALCOM Communications System, allowing a few audio zones to be added where necessary when a full 16-zone T9160 amplifier frame is not required. The amplifier features CobraNet® digital audio input and four channels of 600W amplification.