Search results for '%22anchor audio AN-135%2B%22'
-
Apart Audio CM60DTD 6.5" 2-Way Thin Edge Ceiling Speakers (Pair)
The Apart Audio CM60DTD 6.5 inch two-way versatile built-in loudspeaker is suitable for the distribution of speech and music at a higher volume level. It provides a powerful high-end, dynamic, warm sound due to the tuned bass reflex port and controlled performance. -
Ashly Audio Pema 4125.70 4-Channel Power Amplifier 4 x 125W @ 70V with Protea DSP
The Ashly Pema 4125.70 DSP processor features a new sleek look, 4-channel at 125 Watts per channel. The Pema is a matrix mixer with 8-in x 8-out where any input can be assigned to any output or outputs.
-
Ashly Audio Pema 4250 4-Channel Power Amplifier 4 x 250W @ 4 ohms with Protea DSP
The Ashly Pema 4250 DSP Processor is a Protea-Equipped Media Amplifier—either 4-channel at 250 Watts per channel. Pema is a matrix mixer—all Pema models have a full 8-in x 8-out matrix mixer, where any input can be assigned to any output or outputs. Pema is a digital signal processor.
-
Ashly Audio Pema 4250.70 4-Channel Power Amplifier 4 x 250W @ 70V with Protea DSP
This Ashly Pema 4250.70 powered digital signal processor consists of 8 inputs and 4 power amplifier outputs with the ability to assign any input to any output. This DSP paired PEMA amplifier lowers overall system cost, occupies less space, improves energy efficiency, and both speeds and simplifies system installation and programming.
-
JBL CSA-2120 2-Channel 120W Audio Amplifier
The JBL CSA2120 provides accurate, uncolored sound with low distortion for both audio and voice applications.
-
Ashly Audio TRA-4150 4-Channel Power Amplifier
The Ashly TRA-4150 power amplifier is a 4-channel 2 rack space amplifier that is perfect for low impedance, 25V, 70V or 100V installations with modest power requirements. All TRA Series amplifiers are convection-cooled, so there’s little maintenance after the installation, and no annoying fan noise.
-
Stewart Audio FLX-E-160-2-CV-D 2-Channel DSP Enabled Amplifier 2 x 160W @ 70/100V Dante Network Enabled
The Stewart Audio FLX-E-160-2-CV-D is a 2 channel, 70V/100V, 1/2 rack amplifier delivering 160W per channel with built-in DSP, Ethernet control & reporting, secondary RS-232 control, and remote volume control. The FLX-E-160-2-CV-D amplifier supports Dante™ audio.
-
Stewart Audio FLX-E-160-2-LZ-D 2-Channel DSP Enabled Amplifier 2 x 160W @ 4/8Ω Dante Network Enabled
The Stewart Audio FLX-E-160-2-LZ-D is a 2 channel, 4/8Ω, 1/2 rack amplifier delivering 160W per channel with built-in DSP, Ethernet control & reporting, secondary RS-232 control, and remote volume control. The FLX-E-160-2-LZ-D amplifier supports Dante™ audio.
-
Ashly Audio nX 752 2-Channel Multi-Mode Power Amplifier
The Ashly nX 752 Multi-Mode Power Amplifier is designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.
-
Ashly Audio nX 1502 2-Channel Multi-Mode Power Amplifier
The Ashly nX 1502 Multi-Mode Power Amplifier is designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.
-
Ashly Audio nX 754 4-Channel Multi-Mode Power Amplifier
The Ashly nX 754 Multi-Mode Power Amplifier is designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.
-
Ashly Audio nX 1504 4-Channel Multi-Mode Power Amplifier
The Ashly nX 1504 Multi-Mode Power Amplifier is designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.
-
Ashly Audio nXe 752 2 Channel Networkable Multi-Mode Amplifier
The nXe 752 networkable amplifier has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. This amplifier uses state of the art, light weight, high power, high efficiency switching technology with active power-factor-correction, developed through years of design and field testing.
-
Ashly Audio nXe 1502 2-Channel Networkable Multi-Mode Amplifier
The nXe 1502 networkable amplifier has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. This amplifier uses state of the art, light weight, high power, high efficiency switching technology with active power-factor-correction, developed through years of design and field testing.
-
Ashly Audio nXe 754 4 Channel Networkable Multi-Mode Amplifier
The nXe 754 networkable amplifier has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. This amplifier uses state of the art, light weight, high power, high efficiency switching technology with active power-factor-correction, developed through years of design and field testing.
-
Ashly Audio nXe 1504 4 Channel Networkable Multi-Mode Amplifier
The nXe 1504 networkable amplifier has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. This amplifier uses state of the art, light weight, high power, high efficiency switching technology with active power-factor-correction, developed through years of design and field testing.
-
Ashly Audio SRA-2150 1U Rackmount Stereo Power Amplifier 2 Channels 150W/Channel @ 4 ohms
The Ashly Audio SRA-2150 1U power amplifier is an advanced, efficient amplifier that is perfect for installations with modest power requirements. Housed in a compact single rack space chassis and weighing only 10 lbs, and designed to drive 4 or 8 ohm loads. With remote power turn-on/off and adjustable turn-on delay up to eight seconds.
-
Electro-Voice PA2400T 2-Channel Power Amplifier
The audio performance of the Electro-Voice PA2400T Power Amplifier is superior and fulfills the requirements in many demanding long term applications from sound reinforcement, paging or life safety installations. It's high performance torroidal power and output transformers combine clean saturation free audio performance.
-
Pure Resonance Audio RMA240BT 240W Bluetooth Rack Mount Mixer Amp (Open Box)
Free Shipping!The Pure Resonance Audio RMA240BT 5-channel 4 Ohm/70V commercial rack mount mixer amplifier provides quick and easy Bluetooth connection and 240W of high-performance Class H power encased in a slim and lightweight space-saving design. With the forced air-cooling fan and emergency priority capabilities, this compact and affordable mixer amplifier perfectly accommodates any commercial business or public address application making it ideal for your office, school, restaurant, retail store, or any background music, paging or announcement complete audio system.
List $719.99Regular Price: $599.99
Pro Acoustics Price $484.99
Savings $235.00 (33%) -
Ashly Audio nXp 1502 2 Channel Networkable Multi-Mode Amplifier and DSP
The nXp 1502 networkable amplifier with DSP has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.
-
Ashly Audio nXp 754 4 Channel Networkable Multi-Mode Amplifier and DSP
The nXp 754 networkable amplifier with DSP has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.
-
Ashly Audio TRA-2150 2-Channel Mutli-Mode Power Amplifier 2 x 150W @ 4 Ohms
The TRA-2150 power amplifier is an advanced, efficient 2-channel amplifier featuring 150W at 4 ohm Perfect for Low Impedance, 25V, 70V or 100V installations with modest power requirements, they also feature a switch-mode power supply with Class-D circuitry, providing an extremely power-efficient solution.
-
Ashly Audio ne4250 Network-Enabled 4-Channel Power Amplifier 4 x 250W @ 4 Ohms
This Ashly Audio ne4250 four-channel networked-enabled power amplifier is uniquely designed around an energy efficient Class-D platform with a switching power supply and delivers a minimum power of 150 watts RMS per channel into 8 Ohm loads and 250 watts RMS per channel into 4 Ohm loads with all channels operating.
-
Ashly Audio nXp 752 2-Channel Networkable Multi-Mode Amplifier and Protea DSP
The nXp 752 networkable amplifier with DSP has been designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers.