Search results for '%22anchor audio AN-135%2B%22'
-
Audio-Technica ATND971a Cardioid Condenser Boundary Microphone with Dante Network Output
The Audio-Technica ATND971a has bridged the gap between audio and IT with the first wired microphone that transmits audio and controls data together over the Dante network protocol. A simple Ethernet connection allows the network microphone to communicate across an existing network of Dante-enabled devices and, with the mic's integrated, programmable user switch, control any of those devices at the push of a button.
List $629.99Price $629.00 -
Stewart Audio CVA16-1-CV Single-Channel Dante Subcompact PoE+ Amplifier 16W x 1 @ 70V/100V
The Stewart Audio CVA16-1-CV PoE+ compact Dante amplifier is designed to be a single cable solution for smaller zones without the need for a local power outlet. This amplifier leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it.
-
Stewart Audio CVA40-1-CV-D Single-Channel Dante Subcompact PoE++ Amplifier 40W x 1 @ 70V/100V
The Stewart Audio CVA40-1-CV-D PoE++ compact Dante amplifier is designed to be single cable solutions for small/medium zones without the need for a local power outlet. This amplifier series leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it.
-
Atlas Sound IED1522AIOLR CobraNet Audio I/O Module with Logic and Relays
The Atlas Sound IED1522AIOLR 2x2 CobraNet Audio I/O Module is a CobraNet interface for use in the professionally installed sound market. The IED1522AIOLR receives CobraNet network audio and sends them to two balanced analog audio outputs while simultaneously inputting two channels of mic/line level balanced audio and transmitting them as CobraNet network audio.
List $2,488.99Price $1,992.99Savings $496.00 (20%) -
Atlas Sound IED1544AIO-D 4 x 4 Analog/Dante I/O Module
The Atlas Sound IED1544AIO-D is a 4-input x 4-output mic/line-level analog pre-amplifier that converts analog audio signals to Dante® network audio. Multiple channels of Dante® network audio can be transported over standard IP networks.
List $979.99Price $785.99Savings $194.00 (20%) -
Attero Tech unD4O Dante/AES67 Networked Audio Interface
The Attero Tech unD4O Dante interface is a 4 output, cost-effective way to add up to four analog output channels to an existing Dante-based networked audio system. The unD4O's small form factor and PoE power capability make it easy to put Dante connectivity wherever it's needed - near the audio sink - thereby eliminating costly and interference prone analog wiring. The unD4O is powered by either external +24VDC or any PoE network switch.
-
Attero Tech unHX2D Dante/AES67 Networked HDMI Audio De-Embedder/Embedder Interface
The Attero Tech unHX2D is a Dante enabled HDMI de-embedder/embedder designed to bridge 2-channel PCM HDMI audio to/from a Dante/AES67 audio network. In addition, the unHX2D includes two line-level analog inputs and outputs that can be independently bridged to/from a Dante/AES67 audio network.
-
Atlas Sound TSD-DAC2I 2-Channel Balance Line Input to Dante Interface
The Atlas Sound TSD-DAC2i is a PoE 2-channel analog pre-amplifier that converts analog audio signals into Dante® digital audio. The TSD-DAC2i can be used for any Analog to Dante® digital audio endpoint but is ideally suited to be used with the Atlas Sound WTSD wall mixer series.
List $503.99Price $404.99Savings $99.00 (20%) -
Attero Tech unDIO2X2+ 2x2 Channel Mic/Line I/O Dante Networked Audio Interface
The Attero Tech unDIO2x2+ I/O interface is a 2in/2out, cost-effective way to add up to two channels (in and out) of Dante audio to any Dante-based networked audio system. The small form factor and PoE power capability make it easy to put Dante connectivity wherever it's needed - near the audio source or sink thereby eliminating costly and interference prone analog wiring.
-
Attero Tech unD4I-L 4-Channel Mic/Line In Dante/AES67 Networked Audio Interface
The Attero Tech unD4I-L four input Dante interface is the ideal device for adding mic/line inputs to a Dante system. The addition of four logic outputs allows easy interface with microphone switches and indicator LEDs. The unD4I-L features four balanced mic/line inputs, each with software selectable +48V phantom power and 8 gain levels. Front panel indicators show each channel's gain and phantom power status for easy troubleshooting.
-
Attero Tech Axon D2FLEXio Dual Analog Flex I/O Dante/AES67 Interface
The Attero Tech D2FLEXio provides cost-effective analog audio connectivity for installed AV systems. The small, unobtrusive form factor provides easy installation - anywhere.
-
Yamaha Unified Communications RM-CR Remote Conference Processor
The Yamaha RM-CR signal processor is the heart of the RM series, it automatically recognizes connected devices on the same network for audio routing. -
Audix DN4 Microphone Interface with 4 Ports for Audix RJ45-Equipped Single-Element Microphones
The Audix DN4 microphone interface is a key part of the Audix Dante | AES67 Integrated Microphone System, the fast, trouble-free way to stream Audix audio performance through Ethernet networks. High-quality audio and all microphone functions - including on-off contact closure and LED status indicators - are available through a single CAT5 - CAT7 cable with RJ45 connections at both interface and microphone.
-
Audix DN43 Microphone Interface with M3 Port and Port for Audix RJ45-Equipped Single-Element Microphones
The Audix DN43 microphone interface is a key part of the Audix Dante | AES67 Integrated Microphone System, the fast, trouble-free way to stream Audix audio performance through Ethernet networks. High-quality audio and all microphone functions - including on-off contact closure and LED status indicators - are available through a single CAT5 - CAT7 cable with RJ45 connections at both interface and microphone.
-
Atlas Sound IP-PM8GD-B 8" PoE+ IP Pendant Mount Speaker
The AtlasIED IP-PM8GD-B IP 8" PoE+ IP speaker system leverages the VoIP Communication solution to extend tele-presence with enhanced audio for those environments where network-wide communication is desired.
List $970.99Price $778.99Savings $192.00 (20%) -
Atlas Sound DA-PM8GD-B 8" Pendant Mount PoE Dante Speaker System - Black
The AtlasIED DA-PM8GD is an 8" indoor pendant mount IP PoE amplified loudspeaker featuring Audinate’s Dante digital audio transport platform. The DA-PM8GD supports a 8" efficient speaker design with a sensitivity of 98dB 1W/1m and a maximum output of 109dB. -
Atlas Sound DA-APX PoE+ Dante Outdoor Weather Resistant Horn Speaker
The AtlasIED DA-APX is a weather resistant IP PoE amplified constant directivity high-output horn featuring Audinate’s Dante digital audio transport platform. The DA-APX features a 60° x 40° constant-dispersion pattern across the controlled frequency band of 1.25-10 kHz. -
Atlas Sound IP-SDMF PoE+ Indoor Wall Mount IP Loudspeaker with LCD Display and LED Flashers
The AtlasIED IP-SDMF indoor wall mount IP loudspeaker with display and flasher leverage the VoIP Communication solution to extend tele-presence with enhanced audio for those environments where network-wide communication is desired and that require large loudspeakers with high output.
List $1,524.99Price $1,222.99Savings $302.00 (20%) -
Atlas Sound IP-HVP POE+ Vandal and Weather Resistant Wall Mount IP Speaker
The AtlasIED IPX Series IP-HVP is a vandal-proof, weather-resistant, wall mount IP speaker. It leverages VoIP communication to extend telepresence with enhanced audio for environments where network-wide communication is desired and high-output speakers are required to overcome high ambient noise and/or large spaces.
List $1,165.99Price $934.99Savings $231.00 (20%) -
ProCo AODDP-4XF 4-Input Dante Wall Plate
The ProCo AODDP-4XF wallplate provides one RJ45 Dante input and four Neutrik® connectors for either inputs or outputs. Using our rugged aluminum extrusion, this ProCo® AoD wallplate can provide simple connection of analog equipment to a Dante® network and provide studio-quality, low-latency audio via the XLR connectors.
-
ProCo AODDP-2XF2XM 2-Input + 2-Output Dante Wall Plate
The ProCo AODDP-2XF2XM wallplate provides one RJ45 Dante input and four Neutrik® connectors for either inputs or outputs. Using our rugged aluminum extrusion, this ProCo® AoD wallplate can provide simple connection of analog equipment to a Dante® network and provide studio-quality, low-latency audio via the XLR connectors.
-
ProCo AODDP-4XM 4-Output Dante Wall Plate
The ProCo AODDP-4XM wallplate provides one RJ45 Dante input and four Neutrik® connectors for either inputs or outputs. Using our rugged aluminum extrusion, this ProCo® AoD wallplate can provide simple connection of analog equipment to a Dante® network and provide studio-quality, low-latency audio via the XLR connectors.
-
Atlas Sound IP-SDH POE+ Indoor Wall Mount IP Horn Speaker with LCD Display
The AtlasIED IPX Series IP-SDH indoor wall mount IP speaker with horn and display leverage the VoIP Communication solution to extend telepresence with enhanced audio for those environments where network-wide communication is desired and that require large speakers with high output to overcome high ambient noise areas or large spaces.
-
Atlas Sound IP-SDM POE+ Indoor Wall Mount IP Speaker with LCD Display and Talkback Microphone
AtlasIED IPX Series IP-SDM indoor wall mount IP speaker with an LCD display and talkback leverage the VoIP Communication solution to extend telepresence with enhanced audio for those environments where network-wide communication is desired and that require large speakers with high output to overcome high ambient noise areas or large spaces.
List $1,294.99Price $1,038.99Savings $256.00 (20%)