Search results for 'Crown CDi series'
-
JBL CSR-V 1-Zone Wall Remote Control - Black
The JBL CSR-V-BLK offers source selection and volume control for your CSM mixer from an elegant user interface, up to 1000 ft away. -
JBL CSR-V 1-Zone Wall Remote Control - White
The JBL CSR-V-WHT offers source selection and volume control for your CSM mixer from an elegant user interface, up to 1000 ft away. -
JBL CSR-2SV Remote Control
The JBL CSR-2SV is a Remote Control for audio speakers that can use analog DC voltage to provide logic control ranging from source selection and volume for up to 2 sources. -
JBL CSR-3SV Remote Control
The JBL CSR-3SV is a Remote Control for audio speakers that can use analog DC voltage to provide logic control ranging from source selection and volume for up to 3 sources. -
Atlas Sound Atmosphere C-V Volume Controller - White
The Atlas Sound Atmosphere C-V wall plate enables custom level adjustment, mute, and metering of a single zone.List $179.00Price $170.00 -
Atlas Sound Atmosphere X-ANS Ambient Noise Sensor - White
The Atlas Sound Atmosphere Atmosphere X-ANS is an ambient noise sensor specifically for use with the Ambient Noise Compensation (ANC) functionality in the Atmosphere AZM. Ambient noise compensation allows for automatic adjustment of volume within a given zone based on how loud the environment is.List $209.00Price $198.00 -
Atlas Sound Atmosphere X-ANS-B Ambient Noise Sensor - Black
The Atlas Sound Atmosphere Atmosphere X-ANS is an ambient noise sensor specifically for use with the Ambient Noise Compensation (ANC) functionality in the Atmosphere AZM. Ambient noise compensation allows for automatic adjustment of volume within a given zone based on how loud the environment is.List $209.00Price $198.00 -
ProCo AoD-FAN3-2XM Dante Output Module
The ProCo Sound AoD-FAN3-2XM 2 channel provides one RJ45 Dante input and two Neutrik NC3MXX-B series XLR analog outputs.
-
Atlas Sound Atmosphere A-XLR Remote XLR Audio Input
The Atlas Sound Atmosphere A-XLR is a remote XLR audio input to an Atmosphere AZM audio processor. This expansion acts identically to the on-board mic/line inputs. The AZM will automatically detect the A-XLR and dynamically assign appropriate audio settings, such as dynamics, EQ, auto gain control, and phantom power, to that input. -
Atlas Sound Atmosphere A-BT Remote Bluetooth Wireless Audio Input Receiver with Cat5 Connector
The Atlas Sound Atmosphere A-BT is a remote Bluetooth™ audio input to an Atmosphere AZM audio processor. This wireless expansion remote allows the Bluetooth™ receiver to be optimally placed for wireless coverage. -
Atlas Sound C-ZSV Atmosphere Zone, Source and Volume Wall Controller - White
The Atlas Sound Atmosphere C-ZSV controller is an intuitive wall controller for total control of an Atmosphere AZM system. The C-ZSV enables control of multiple zones for source selection and volume adjustments, but also the ability to recall scenes and messages.List $299.00Price $284.00 -
Atlas Sound C-ZSV-B Atmosphere Zone, Source and Volume Wall Controller - Black
The Atlas Sound Atmosphere C-ZSV-B controller is an intuitive wall controller for total control of an Atmosphere AZM system. The C-ZSV-B enables control of multiple zones for source selection and volume adjustments, but also the ability to recall scenes and messages.List $299.00Price $284.00 -
QSC MP-MFC Wall Mount Controller for MP-M Series Mixers - White
The QSC MP-MFC controller is an intuitive wall mount control to enable customizable system adjustments for the MP-M Series music and paging mixer. Designers can configure these control peripherals to provide end users with as much or as little control over the system as needed.
-
QSC MP-MFC Wall Mount Controller for MP-M Series Mixers - Black
The QSC MP-MFC controller is an intuitive wall mount control to enable customizable system adjustments for the MP-M Series music and paging mixer. Designers can configure these control peripherals to provide end users with as much or as little control over the system as needed.
-
RDL DB-BT1A Wall-Mounted Bluetooth Audio Format-A Interface
The RDL D SERIES-BT1A modules are Bluetooth audio receiving modules compatible with RDL Format-A twisted pair receivers. When paired with a compatible Bluetooth enabled device, the module receives stereo audio from the Bluetooth source. The stereo signal is sent through two Format-A pairs to any RDL Format-A receiver. A stereo/mono switch set by the installer permits summed mono audio to be sent over one switch-selected pair to the Format-A receiver.
List $515.81Price $386.86Savings $128.95 (25%) -
Atlas Sound TSD-DAC2I 2-Channel Balance Line Input to Dante Interface
The Atlas Sound TSD-DAC2i is a PoE 2-channel analog pre-amplifier that converts analog audio signals into Dante® digital audio. The TSD-DAC2i can be used for any Analog to Dante® digital audio endpoint but is ideally suited to be used with the Atlas Sound WTSD wall mixer series.
List $503.99Price $404.99Savings $99.00 (20%) -
Juice Goose IP 50 Web IP Based Remote Power Controller
The Juice Goose iP 50 is a web (IP) based remote power control device enclosed in a slim line chassis with AC power protection that can be accessed via one of several Ethernet based links.
List $494.00Price $445.00 -
Shure AD610 ShowLink Wireless Access Point
The Shure AD610 ShowLink™ access point enables real-time remote control of all ShowLink-enabled Axient™ transmitters, including both ADX and AXT series models.
-
Audio-Technica ATND8734a Power Module with Dante Network Output
The ATND8734a is a Dante-enabled wall/ceiling plate power module designed for use with gooseneck and hanging microphones that have a TA3F-type connector. The power module is equipped with an RJ45 output jack that allows for easy connection to the network via CAT5e (or better) cable.
List $549.99Price $549.00 -
Stewart Audio CVA40-1-CV-D Single-Channel Dante Subcompact PoE++ Amplifier 40W x 1 @ 70V/100V
The Stewart Audio CVA40-1-CV-D PoE++ compact Dante amplifier is designed to be single cable solutions for small/medium zones without the need for a local power outlet. This amplifier series leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it.
-
Juice Goose CQ PD1-4 Four Circuit Sequenced 80 Amp Power Distribution System
The Juice Goose CQ-PD1-4 is a four step sequencer that contains all the circuitry needed for timing and communications with other Juice Goose CQ Series units.
List $642.00Price $578.00 -
Juice Goose IP 50-RX Web IP Based Remote Power Controller
The Juice Goose iP 50-RX is a web (IP) based remote power control device enclosed in a slim line chassis which includes the patented Juice Goose RX Series surge protection circuitry. With this product AC power can be turned on and off via one of several Ethernet based links.
List $663.00Price $597.00 -
Audio-Technica ATND933aWH Hypercardioid Condenser Hanging Microphone with Dante Network Output Power Module
The ATND933aWH is a wide-range miniature condenser microphone with a hypercardioid polar pattern. It is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications.
List $629.99Price $629.00 -
Audio-Technica ATND933aWC Cardioid Condenser Hanging Microphone with Dante Network Output Power Module
The ATND933aWC cardioid condenser hanging microphone is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications. Its low profile and excellent response make it ideally suited for suspending over choirs, instrumental groups and theater stages.
List $629.99Price $629.00