Search results for 'volume control'
-
Stewart Audio DSP100-2-CV-D DSP Enabled Amplifier
The DSP100-2-CV-D is an affordable, 2 channel, 70V/100V, 1/2 rack amplifier delivering 100W per channel with built in DSP and remote volume control. The DSP100-2-CV-D supports Dante™ audio.
-
Stewart Audio CVA16-1-CV Single-Channel Dante Subcompact PoE+ Amplifier 16W x 1 @ 70V/100V
The Stewart Audio CVA16-1-CV PoE+ compact Dante amplifier is designed to be a single cable solution for smaller zones without the need for a local power outlet. This amplifier leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it.
-
Stewart Audio CVA40-1-CV-D Single-Channel Dante Subcompact PoE++ Amplifier 40W x 1 @ 70V/100V
The Stewart Audio CVA40-1-CV-D PoE++ compact Dante amplifier is designed to be single cable solutions for small/medium zones without the need for a local power outlet. This amplifier series leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it.
-
Attero Tech unDIO2X2+ 2x2 Channel Mic/Line I/O Dante Networked Audio Interface
The Attero Tech unDIO2x2+ I/O interface is a 2in/2out, cost-effective way to add up to two channels (in and out) of Dante audio to any Dante-based networked audio system. The small form factor and PoE power capability make it easy to put Dante connectivity wherever it's needed - near the audio source or sink thereby eliminating costly and interference prone analog wiring.
-
Stewart Audio DSP100-1-CV-D Mono DSP and Dante Network Enabled Amplifier
The Stewart Audio DSP100-1-CV-D is an affordable, single-channel, 70V/100V, 1/2 rack amplifier delivering 100W audio power, with built-in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications. The DSP100-1-CV-D supports Dante audio.
-
Stewart Audio DSP100-2-LZ-D 2-Channel DSP Enabled Amplifier 2 x 100W @ 4/8 Ohms Dante Network Enabled
The Stewart Audio DSP100-2-LZ-D is an affordable, 2 channel, 4/8 Ohm, 1/2 rack amplifier delivering 100W per channel with built-in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications. The DSP100-2-LZ-D supports Dante™ audio.
-
Stewart Audio FLX-E-160-2-CV-D 2-Channel DSP Enabled Amplifier 2 x 160W @ 70/100V Dante Network Enabled
The Stewart Audio FLX-E-160-2-CV-D is a 2 channel, 70V/100V, 1/2 rack amplifier delivering 160W per channel with built-in DSP, Ethernet control & reporting, secondary RS-232 control, and remote volume control. The FLX-E-160-2-CV-D amplifier supports Dante™ audio.
-
Stewart Audio FLX-E-160-2-LZ-D 2-Channel DSP Enabled Amplifier 2 x 160W @ 4/8Ω Dante Network Enabled
The Stewart Audio FLX-E-160-2-LZ-D is a 2 channel, 4/8Ω, 1/2 rack amplifier delivering 160W per channel with built-in DSP, Ethernet control & reporting, secondary RS-232 control, and remote volume control. The FLX-E-160-2-LZ-D amplifier supports Dante™ audio.
-
Stewart Audio FLX-E-320-1-CV-D Mono DSP Enabled Amplifier 1 x 320W @ 70/100V Dante Network Enabled
The Stewart Audio FLX-E-320-1-CV-D is a single channel, 70V/100V, 1/2 rack amplifier delivering 320W audio power with built in DSP, Ethernet control & reporting, secondary RS-232 control and remote volume control. The FLX-E-320-1-CV-D amplifier supports Dante™ audio.
-
Yamaha XMV4140-D 4-Channel Commercial Power Amplifier with Dante
The Yamaha XMV4140-D 4-channel 70V/4 ohm/8 ohm power amplifier with Dante for simple and fast system configuration -
Yamaha XMV8280-D Commercial Power Amplifier with Dante
The Yamaha XMV8280-D multi-channel power amplifier combines Class-D efficiency with features designed specifically to benefit commercial installation sound systems. -
DBX DriveRack VENU360 Complete Loudspeaker Management System
The DBX DriveRack VENU360 provides all the processing and flexibility you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx's proprietary AutoEQ™ and AFS™ algorithms, additional input channels, ethernet control via an Android,® iOS,® Mac,® or Windows® device, and updated wizards, the DriveRack VENU360 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation.
-
Yamaha Tio1608-D2 Dante Equipped I/O Rack
The Yamaha Tio1608-D2 is a Dante-compatible I/O rack equipped with 16 mic/line inputs and 8 line outputs. It can control gain from TF Series and DM3 consoles remotely, allowing the construction of a simple stagebox system. The versatile Tio1608-D2 also supports 96k, making it perfect for use as an I/O rack in large installations with products such as the RIVAGE PM or DME7. -
Atlas Sound DPA602 600W Networkable Multi-Channel Power Amplifier
The AtlasIED DPA Series amplifiers feature a combination of flexibility, performance, and control to provide high-value features for applications that require more than just great sound. The network-enabled DPA series amplifiers are DSP controlled 4-channel amplifiers that can be configured in three different amplification arrangements to meet a wide range of installation design requirements.
-
Atlas Sound DPA1202 1200W Networkable Multi-Channel Power Amplifier
The AtlasIED DPA1202 features a combination of flexibility, performance, and control to provide high-value features for applications that require more than just great sound. The network-based DPA1202 is a DSP controlled 4-channel amplifier that can be configured in three different amplification arrangements to meet the design requirements of any installation.
-
Atlas Sound DPA2402 2400W Networkable Multi-Channel Power Amplifier
The AtlasIED DPA2402 features a combination of flexibility, performance, and control to provide high-value features for applications that require more than just great sound. The network-based DPA2402 is a DSP controlled 4-channel amplifier that can be configured in three different amplification arrangements to meet the design requirements of any installation.
-
Atlas Sound IED1544ZOP 4x4 Smart Zone Output Processor
The Atlas Sound IED1544ZOP 4x4 Smart Zone Output Processor provides all the network audio routing and zone digital signal processing functions of a DNA2404D integrated network amplifier unit. This includes Dante™ network audio input, equalization, level control, and IED's patented AlwaysHEARTM smart ambient analysis automatic level adjustment.
List $3,556.99Price $2,847.99Savings $709.00 (20%) -
Community ALC-404D 4-Channel x 400W Amplified Loudspeaker Controller with DSP and Dante
Community's line of Amplified Loudspeaker Controllers (ALC) offers factory-optimized DSP processing, protective limiting and amplification, as well as signal routing, zone switching, and remote monitoring for virtually any Community loudspeaker application.
-
Yamaha MRX7-D Digital Signal Processor
The Yamaha MRX7-D offers outstanding control efficiency and flexibility for a broad spectrum of audio installations. -
Bose PowerShareX PSX2404D 4-Channel 2400W Adaptable Power Amplifier with Dante
The Bose PowerShareX PSX2404D is a four-channel, 2400-watt smart amplifier designed for use with Bose Professional installed sound systems. Onboard DSP gives you instant access to optimized loudspeaker presets via ControlSpace Designer software with easy ecosystem integration across Bose Professional processors, loudspeakers, and controllers. Design, configuration, installation, and operation become simpler — so you can get the job done and move on to the next. -
Audio-Technica ATUC-IRCUDAN Infrared Control Unit with Dante for Wired or Wireless Digital Discussion Systems
The Audio-Technica ATUC-IRCUDAN rack-mountable infrared control unit includes all of the features of the ATUC-IRCU, plus Dante™ output with redundancy and drives wireless or wired-wireless hybrid systems. It can power and control a total of 200 ATUC-IRDU infrared discussion units and 100 ATUC-50DU/IU/INT wired units.
-
Community ALC-3202D 2-Channel x 3200W Amplified Loudspeaker Controller with DSP and Dante
Community's line of Amplified Loudspeaker Controllers (ALC) offers factory-optimized DSP processing, protective limiting and amplification, as well as signal routing, zone switching, and remote monitoring for virtually any Community loudspeaker application.
-
Bose PowerShareX PSX4804D 4-Channel 4800W Adaptable Power Amplifier with Dante
The Bose PowerShareX PSX4804D is a four-channel, 4800-watt smart amplifier designed for use with Bose Professional installed sound systems. Onboard DSP gives you instant access to optimized loudspeaker presets via ControlSpace Designer software with easy ecosystem integration across Bose Professional processors, loudspeakers, and controllers. Design, configuration, installation, and operation become simpler — so you can get the job done and move on to the next. -
Atlas Sound IPCSDTOUCH-G Touch Screen Dante Digital Communication Station with Gooseneck Microphone
The Atlas IPCSDTOUCH-G digital communications station is a fully programmable touch screen user interface device for initiating audio/visual announcements with GLOBALCOM Announcement Control Systems.
List $6,885.99Price $5,510.99Savings $1,375.00 (20%)