Commercial Sound Equipment

The TOA 900 SERIES are widely recognized as the industry standard in installed sound system amplification. When reliability and performance are critical such as in paging, music distribution for airport, hospital and industrial sound system.

The TOA A-2240 mixer power amplifier is designed to be a highly cost-effective solution to the demands of PA applications. It offers a high level of performance and versatility and is especially well-suited for broadcasting paging.

The TOA P-912MK2 900 SERIES power amplifier is great for a wide variety of applications such as public address, paging and music distribution in commercial 70 volt sound systems. One Module Slot accepts TOA plug-in modules for unmatched input flexibility.

The Pure Resonance Audio RZMA120BT is a powerful 4-zone commercial mixer amplifier with built-in MP3, FM tuner, Bluetooth, and recording features. With 4 x 120-watt output at 4 Ohm, 70, and 100 Volts, it offers advanced matrix technology for flexible zone selection. It includes a 1-watt 8-ohm monitor channel and supports remote microphone paging via Cat5. An IR remote allows easy volume and source control.

WHILE SUPPLIES LAST!  Get a FREE PMZ16 Paging Microphone with the Purchase of Any RZMA Series Multi-Zone Mixer Amplifier

The TOA P-924MK2 900 SERIES is widely recognized as the industry standard in installed sound system amplification. When reliability and performance are critical such as in paging, music distribution for retail, restaurants, airports, hospitals, schools and industrial sound system applications.

The Crown CDi 1000 is a professional two-channel power amplifier designed and built for installed sound applications. Extremely versatile; rated for 2Ω, 4Ω, 8Ω loads and 70V rms/140V rms outputs with accurate, uncolored sound with very low distortion for the best in music and voice reproduction.

The Pure Resonance Audio RZMA240BT is a powerful 4-zone commercial mixer amplifier with built-in MP3, FM tuner, and Bluetooth. With 4 x 240-watt output at 4 ohms, 70, and 100 volts, it offers advanced matrix technology for flexible input assignments.

WHILE SUPPLIES LAST!  Get a FREE PMZ16 Paging Microphone with the Purchase of Any RZMA Series Multi-Zone Mixer Amplifier

The Crown CDi 2000 power amplifier is a professional tool designed and built for installed sound applications. Extremely versatile; rated for 2Ω, 4Ω, 8Ω loads and 70Vrms/140Vrms outputs. The Crown CDi series amplifiers include four models which are identical except for output power: CDi 1000, CDi 2000, CDi 4000, and CDi 6000.

The TOA DA Series multi-channel digital power amplifiers are ideal for multi-zone distributed speaker systems and professional sound applications. Engineered with Class D technology, the new DA Series amplifiers operate at 85 percent efficiency.

The Crown CDi 4000 Power Amplifier is a professional tool designed and built for installed sound applications. Extremely versatile; rated for 2Ω, 4Ω, 8Ω loads and 70Vrms/140Vrms outputs. The Crown CDi series amplifiers include four models which are identical except for output power: CDi 1000, CDi 2000, CDi 4000, and CDi 6000.

The Crown CDi 6000 Power Amplifier is a professional tool designed and built for installed sound applications. Extremely versatile; rated for 2Ω, 4Ω, 8Ω loads and 70Vrms/140Vrms outputs. The Crown CDi series amplifiers include four models which are identical except for output power: CDi 1000, CDi 2000, CDi 4000, and CDi 6000.

Bogen's V35 Power Vector Modular Amplifier offers 35 Watts of power and is designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems. Each module is controlled by an independent volume control with an associated signal/clip LED for signal status. An 11-segment LED output meter monitors output signal level.

Speco Technologies’ UL listed Contractor Series amplifiers can stand on their own to run a smaller installation, or be incorporated into a much larger job. With RMS power ranging from 30W to 120W, microphone and source-mixing ability.

Bogen's V60 Power Vector Modular Amplifier offers 60 Watts of power and is designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems. Each module is controlled by an independent volume control with an associated signal/clip LED for signal status.

Bogen's V100 Power Vector Modular Amplifier offers 100 Watts of power and is designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems. It also includes a motorized master volume control that can be controlled using a remote volume control panel.

Bogen's V150 Power Vector Modular Amplifier offers 150 Watts of power and is designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems. The model includes eight module bays for plug-in input modules and allows up to four levels of priority between modules.

The Lowell MA60 5 Channel Mixer Amplifier includes five channel volume controls, treble and bass controls, master volume control, main power switch, and LED display bank for output level.

Bogen's V250 Power Vector Modular Amplifier offers 250 Watts of power and is designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems. The model includes eight module bays for plug-in input modules and allows up to four levels of priority between modules.