More Views

Community D4LP 4.5" Low Profile 2-Way Ceiling Speakers - Pair
Part # D4LP
Model # D4LP

The Community D4LP is the D4 coaxial design in a low profile back can for use when clearances above the ceiling are minimal.

Availability: Usually arrives in 12-16 business days

Need Quantity Pricing?

We provide quantity discounts for contractors & installers, schools, government, and military buyers on select brands and products.

Talk To An Engineer

Description

Details

Community D4LP 4.5" Low Profile 2-Way Ceiling Speakers

The D4LP is the D4 coaxial design in a low profile back can for use when clearances above the ceiling are minimal. The D4 has a wider dispersion than the larger models. The high performance D4 is a true coaxial loudspeaker with a real compression driver concentrically arranged so that the upper frequencies emerge through the center of the low-frequency driver’s magnetic structure and cone via a precisely tapered Tru-Phase™ high-frequency waveguide. This special construction provides consistent, wide dispersion up to 16 kHz, all but eliminating high-frequency narrowing. Further pattern improvement is achieved by precisely mounting the low frequency driver (and its concentric HF driver) centered in the baffle, as contrasted to the offset designs used by others.


The D SERIES offers powerful magnetic structures and efficient coils to ensure high output, which results in more headroom per power amplifier. The D4LP is available as a complete assembly, including everything needed for standard installations, and can also be ordered as separate faces and back cans. The model has a built-in autoformer allowing it to be used in 8-ohm or 70V/100V applications. The D SERIES ceiling loudspeakers are ETL listed and all models have been tested by ETL to comply with UL1480, UL2043 and CSA60065.

Features

Features

  • High intelligibility with exceptional uniform coverage
  • Consistent, wide dispersion up to 16 kHz
  • True coaxial loudspeakers with HF compression drivers
  • Tru-Phase™ high-frequency waveguide
  • Patented Carbon Ring Cone Technology™
  • Spring loaded Drop-Stop™ installation assistant tabs support the back can on the included rails and C-ring to simplify installation
  • niquely designed tile bridge support rails and snap-on C-ring support plates prevent sag
  • Twist-Assist™ loudspeaker face retainer tabs for fast and easy installation
  • 3/4" and 1" knock-outs on the sides of the back can
  • External loop-through Euroblock connectors
  • Rear cover with integrated cable clamp (strain relief) and optional conduit knockout
  • Selectable 8 ohm or 70V/100V operation
  • Back can and face-only packages available
  • Five year warranty
Specification
Operating Range90 Hz - 18.5 kHz
Frequency Response120 Hz - 16 kHz (±5 dB)
Max Input Ratings (8 ohm)60W continuous, 150W program
22 volts RMS, 49 volts momentary peak
Transformer Taps70V: 30W, 15W, 7.5W, 3.75W and low impedance
100V: 30W, 15W, 7.5W
Sensitivity (1W/1m)92 dB SPL (160 Hz to 12.5 kHz 1/3 octave bands)
93 dB SPL (250 Hz to 4 kHz speech range)
Maximum Output110 dB SPL / 116 dB SPL (peak 8 ohm)
Nominal Impedance8 ohms
Minimum Impedance7.6 ohms @ 330 Hz
Nominal Coverage130º conical (1 kHz to 6 kHz)
140º conical (500 Hz to 6 kHz)
Axial Q / DI4 / 6, 500 Hz to 6 kHz
Crossover Frequency2 kHz
Recommended Signal Processing90 Hz high pass filter
DriversLF 1 x 4.5"
HF 1 x 3/4" exit compression driver
Driver ProtectionSelf-resetting solid state circuit breaker
Input Connection4-position Euroblock connector
ControlsFront-face wattage / low impedance selector switch
EnclosureCorrosion-resistant zinc plated steel
Mounting/Rigging Provisions3 steel mounting clamps with 2-inch grip range
GrillePowder coated steel with safety line, white finish, paintable
BaffleReflex loaded UL 94V-0 rated ABS
Safety Features3 x safety hang points
Safety Agency RatingsETL listed to comply with UL1480, UL2043 and CSA60065. Suitable for use in air handling spaces per NFPA 70 and NFPA 90
Required AccessoriesElectronic high pass filter
Supplied AccessoriesC-Ring supporting plate, tile support bridge rails, grille, paint mask, cut-out template, flat screwdriver
Optional AccessoriesD45-FAR Face Adapter Ring
D45-CATR Can Adapter Ring / Trim Ring
D45-NCB New Construction Bracket
Cutout Diameter8.75" (222 mm)
Dimensions (Dia x D)9.77" (248.1 mm) x 3.6" (91.4 mm)
Weight6.6 lbs (3 kg)
Shipping Weight22 lbs (10 kg)
Documents

Documents

Reviews

Be the first to review this product

Write Your Own Review

You're reviewing: Community D4LP 4.5" Low Profile 2-Way Ceiling Speakers - Pair