Commercial Sound Accessories

The AVP1 is a dual-gang wall plate mounted interface device that allows the line-level outputs of audio and videotape/cassette recorders, phonographs, etc. to be connected to microphone inputs of house PA systems.

The AVP1 is a dual-gang wall plate mounted interface device that allows the line-level outputs of audio and videotape/cassette recorders, phonographs, etc. to be connected to microphone inputs of house PA systems.

DesignLab, by AtlasIED's custom print process, takes the SHS from well-hidden to completely camouflaged in virtually any ceiling. Using an incredibly accurate UV-printer, AtlasIED is able to match colors and patterns so the SHS can blend into any...

Biamp Tesira UTMK-1 Under Table Mount Kit The Tesira UTMK-1 is an under table mount kit. The Tesira UTMK-1 complies with the United States Trade Agreement Act (TAA), allowing it to be included in GSA Schedule contractors’ sales bids for the...

This Lowell ES-4-RIB rough-in bridge is designed to be mounted in new construction, drywall or plaster ceiling before finished ceiling is installed to serve as a placeholder for ES-4T ceiling speakers. Built tough with 20-gauge steel construction with a...

The Lowell ES-4-RTR trim ring for retrofit applications where speaker model ES-4T is installed in an existing standard 8 inch speaker enclosure with 11.25 inch diameter mounting bolt circle.

Cambridge DSRMP-8 Volume Control Panel The DSRMP-8 rack-mounted attenuator panel is designed for use in large 70.7-volt centralized sound masking systems. Each attenuator is rated at 100 watts. Attenuator increments are 1.5 dB for each 1-10 position...

Biamp Tesira TEC-1s Surface Mount Ethernet Control Device The Tesira TEC-1s is an Ethernet control device for use with all Tesira systems. It offers a simple, intuitive interface for end users and can be installed and configured to fit the unique needs...

Electro-Voice MB200 U-Bracket Mounting Kit for Sx300 and SB122 Speakers The Electro-Voice MB200 installation kit consists of a U-bracket, two M8 x 1.25 hex-head bolts, four lock washers, two friction pads, and two 3/8-24 hex-head bolts. The kit is...

Bose PowerMatch AmpLink 24-Channel Input Card The Bose® AmpLink input card for PowerMatch® configurable professional power amplifiers installs into the digital expansion slot to receive 24 digital audio channels from a Bose DSP via a shielded...

AtlasIED IP-SEST-SD Straight Enclosure with Displays The IP-SEST-SD is a straight surface mount enclosure is designed for use only with AtlasIED speaker system models IP-SDM, IP-SDMF, IP-SDH, and IP-SDMFLED. The unit provides an architecturally pleasing...

The AC-CMEZ42-TB is an extra tile bridge for CM400i and CM42-EZs speakers.

The ASP-MG2240S Enhanced Privacy Sign informs the public that a sound masking system is in use to help ensure secure, private conversations. This wired privacy sign is designed to integrate with the AtlasIED ASP-MG2240 Sound Masking Controller. The...

The AtlasIED FS-PMBRKT is a bracket designed to enable an FS Series horn loudspeaker to be mounted to a tripod loudspeaker stand, such as the AtlasIED SS500E. The unit attaches directly to existing mounting points on the FS horn bracket and seats...

The HY-60D series brackets are used to change the directivity angle mode of the HX-7 Series Speaker System to 60° mode. Three pieces of the HY-60D Series are required to obtain 60° mode of directivity angle. The HY-60DW-WP brackets can be used...

The Cambridge Sound Management Beam Bracket is for mounting the Qt emitter to exposed I-beams or trusses. The Beam Bracket is compatible with both the Qt Active Emitter and Qt Standard Emitter and ships with a bolt for attaching the clamp to the cylinder...

The Cambridge Qt® Room Control Qt-RC3 can be used to adjust the sound masking level for an individual room or a space with up to 8 Emitters or 14 Active Emitters. This version of the wall-mounted volume control unit is designed to work with Qt 300...

AtlasIED WPD-SWM Wall Plate Push Button Switch The WPD-SWM wall plate offers reliable and convenient remote control for Atlas Power products, including the TSD-SEQ6 and ECS-3 sequencers. Designed for momentary contact closure, this push-button switch...

The custom engineered powder coated steel back-can has been designed to cater for all conceivable installation possibilities making the CMS 1201DC extremely versatile. Internally dampened with 11 mm (0.43”) OSB2 board, the addition of the back-can...

The Cambridge Sound Managment metal Drywall Roughin Bracket (SKU: DRB-1) is a useful tool for installers who need to ensure that holes are left for cables and Qt® Emitters before the drywall ceiling is hung. Slats make the bracket easier to fold and...