Skip to main content

Countryman Type 85 Active Direct Box

Part #:
DT85
Model #:
Type 85
Availability: Usually arrives in 5-9 business days. Please be aware that global supply shortages outside our control may interfere with our normal delivery times and product availability. For more information, email sales@proacoustics.com or call us at 888-256-4112.
Certified Audio
Expertise
FREE Custom
System Design
Get Expert
Help Fast

Ask an Expert

Our expertly trained Sales Engineers are ready to help!

(888) 256-4112

Get a Quote, Price or Support Fast!

We want to make contacting us as fast and as easy as possible. Please reach out if you have any questions or concerns about our products, system design, technical support, or orders.
Phone Monday - Friday
8:00 AM - 5:00 PM
1-888-256-4112
Email Contact us by email or
our simple form.
SEND EMAIL

The Type 85 connects any high-impedance instrument pickup, even piezo pickups, to a balanced microphone (XLR type) input. It provides a strong, clean signal to the mix board without adding noise or distortion.

Description

The Type 85 connects any high-impedance instrument pickup, even piezo pickups, to a balanced microphone (XLR type) input. It provides a strong, clean signal to the mix board without adding noise or distortion. It won’t change the tone or volume you hear from your own amp like passive direct boxes. It won’t break just when you need it. It won’t develop a dead battery on stage because it runs on Phantom power.

Indestructible - Connectors and switches are recessed into a single-piece extruded case with extra-thick walls. You can literally drive a truck over a Type 85 without hurting it. Internal electronics are molded in a solid epoxy block and fully protected against electrical damage. The input can withstand 220 V AC all day long and static spikes up to 20,000 V.

Battery or Phantom Power - Most mixing consoles provide 48 V Phantom power and the Type 85 will automatically use it. If you don’t have Phantom power, the Type 85 will run for about 400 hours from a single internal 9 V battery.

Simply Exceptional Sound - The Type 85 uses only hand-selected high-quality discrete components woven into a single-ended class A circuit, much like a classic tube microphone preamp. The Type 85 has an incredibly smooth, sweet sound. Unlike many active DI boxes, the Type 85 can always isolate ground, even when running on Phantom power, to help eliminate hum and buzz from ground problems.

The Type 85 doesn’t have roll off switches or effects. Adjusting the frequency content of a sound source is an artistic decision best done at the mixing location where you can hear the results and easily make changes.

Features

  • Connects any high-impedance instrument to an XLR microphone input
  • Active direct box can run off internal 9V battery (~400 hours) if phantom power isn't available
  • Strong, clean signal to the mix board with no added noise or distortion
  • Isolates ground buzz between console and amp
  • Small, compact, sleek design
  • Almost invisible on stage
  • Single-piece extruded case with extra-thick walls
  • Internal components are fully protected against electrical damage
  • Input circuit withstands 220V AC, and static spikes up to 20,000 volts

Specifications

Frequency Response 20 Hz to 20 kHz +- 1 dB
Noise Floor (shorted input) .63 μV RMS (-122 dBu)
Power Requirements 9 V battery or .4 mA @ 48 V Phantom
Input Protection 220 V RMS and 20,000 V static discharges
Voltage Gain -10 dB in Pickup mode-46 dB in Speaker mode
RF Filtering 250 kHz Low Pass on input30 kHz Low Pass on output
Maximum Input Level 5 V P-P in Pickup mode 300 V P-P in Speaker mode Equal to 2,800 Watts into 4 Ohms
Distortion .018% THD @ 1 kHz and 1 V P-P in.08% IMD 10 kHz/60 Hz 1 V P-P in
Input Resistance 10 MOhms in Pickup mode (10 times the input resistance of a typical guitar amplifier)
Input Capacitance 160 picofarad, equal to two feet of low-capacitance guitar cable
Dimensions 1.75 in x 3 in x 5 in (45 mm x 77 mm x 127 mm)
Weight 18.5 oz (0.52 kg)
My Cart