Mackie HD1521 2 Way 15 inch Powered Loudspeaker (Discontinued)
Usually arrives in 5-9 business days.
The Mackie HD1531 Powered Loudspeaker represents the first step into portable high-definition live sound, providing precise, articulate full-range sound at the high output levels demanded of modern PA systems.
The HD1531 Powered Loudspeaker represents the first step into portable high-definition live sound, providing precise, articulate full-range sound at the highoutput levels demanded of modern PA systems. Three Class-D Fast Recovery™ amplifiers efficiently drive 1800W of total system power, providing maximum output with minimal distortion. True high-definition sound is possible thanks to an arsenal of technological innovations including our patented acoustic correction processing that was previously only available on highend stadium touring systems. This complex processing, along with a phase-coherent electronic crossover and transducer time-alignment provide unparalleled acoustic accuracy that has to be heard to be believed.
The 15” neodymium woofer, 6” mid-range transducer and heat-treated titanium compression driver are custom designed by the award winning engineering team at EAW, delivering the ultimate in both quality and performance. A user-adjustable 3-band contour EQ is built into the loudspeaker and features a sweepable mid frequency for precise tonal shaping.
All of these high-end components are housed in a rugged, all-wood enclosure that not only protects, but allows for multiple mounting options including flying and pole-mounting. The HD1531 brings high-definition sound to the world of portable PA systems.
| Acoustic Performance | |
|---|---|
| Frequency Response (–3 dB) | 50 Hz - 18 kHz |
| Frequency Range (–10 dB) | 38 Hz - 20 kHz |
| Horizonal Coverage (–6 dB) | 90° averaged 2 kHz to 10 kHz |
| Vertical Coverage (–6 dB) | 40° averaged 2 kHz to 10 kHz |
| Directivity Factor; Q (DI) | 11.9 (10.7), averaged 2 kHz to 10 kHz |
| Max SPL Peak (Calculated) | 135 dB @ 1 m |
| Max SPL Peak (Measured) | 126 dB @ 1 m |
| Crossover Points | 400 Hz, 1500 Hz |
| Input / Output | |
| Input Type | Female XLR, balanced differential |
| Input Impedance | 11kΩ balanced |
| Loop Out Type | Male XLR, balanced differential |
| Equalization | |
| Low Shelving | ±3 dB @ 80 Hz (6 dB/octave) |
| Mid Peaking | ±3 dB, 100 Hz to 8 kHz, Q=1.5 |
| High Shelving | ±3 dB @ 12 kHz (6 dB/octave) |
| Low-Frequency Power Amplifier | |
| Rated Power | 700W RMS 1400W Peak |
| Rated THD | < 0.03% |
| Cooling | Convection Extrusion |
| Design | Class D |
| Mid- and High-Frequency Power Amplifiers | |
| Rated Power | 100W RMS 200W Peak |
| Rated THD | < 0.03% |
| Cooling | Convection Extrusion |
| Design | Class D |
| Low-Frequency Transducer | |
| Diameter | 15" (381 mm) |
| Voice Coil Diameter | 3" (76 mm) |
| Diaphragm Material | Paper |
| Magnet Material | Neodymium |
| Mid-Frequency Transducer | |
| Diameter | 6" (152 mm) |
| Diaphragm Material | Paper |
| Magnet Material | Ferrite |
| High-Frequency Transducer | |
| Voice Coil Diameter | 1.75" (44 mm) |
| Horn Entry Diameter | 1" (25 mm) |
| Diaphragm Material | Heat treated titanium |
| Line Input Power | |
| Power | 120 VAC, 60Hz |
| Recommended Amperage Service | 9 amps |
| AC Connector | 3-pin IEC 250 VAC |
| Construction Features | |
| Basic Design | Trapezoidal, 20° included angle |
| Material | 15 mm exterior grade premium birch plywood |
| Finish | High durability black paint |
| Handles | One on each side |
| Grille | Powder coated galvanized steel |
| Display LEDs | Power ON, EQ ON, Sig/Limit,Thermal protection, Front Power Light ON |
| Fly Points | Twelve M10 x 1.5 mm |
| Dimensions (H x W x D) | |
| Product | 35.4" (900 mm) x 18.3" (464 mm) x 118.8" (478 mm) |
| Shipping | 38" (965 mm) x 21" (533 mm) x 22" (559 mm) |
| Weight | |
| Net | 96 lbs (43.5 kg) |
| Shipping | 108 lbs (49 kg) |
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.