Mackie HD1531 3 Way 15 inch Powered Loudspeaker (Discontinued)
Usually arrives in 5-9 business days.
The Mackie HD1801 High Definition Powered Subwoofer delivers 1600W of peak system power via Class-D Fast Recovery amplification and provides intense low-frequency extension and punch to any Mackie full-range system.
The Mackie HD Series Powered Subwoofers provide intense low-frequency extension and punch to any Mackie full-range system. Designed and tuned by the experts at EAW, HD1801 subs deliver 1600W peak power via high-output 18” drivers custom-designed for optimal pairing with Mackie full-range loudspeakers. The HD1801 incorporates Mackie-standard professional components like efficient Class-D Fast Recovery™ amplifiers and system-optimizing Active electronics so that everything sounds great right out of the box.
Premium circuitry includes a symmetrical Linkwitz- Riley crossover, precision tuning filters and user-friendly features like high pass outputs for stereo operation with a single sub. The 15mm birch plywood enclosures feature a ported, direct-radiating design for chestpounding punch. Pair the HD1801 with any Mackie full-range loudspeaker for an extremely powerful and fully high-definition PA solution.
Paired with a Mackie HD Series loudspeaker, you have a complete (and completely affordable) “plug and play” system that is ideal for small clubs, DJs and rehearsal spaces. The HD1801 has both full-range and high-pass stereo outputs for connection to full-range top boxes. Just dial in the appropriate level and use the polarity switch to make sure the sub is in phase with the loudspeakers. The integrated pole-cup can accommodate a standard mounting pole, so your favorite speaker has a nice place to sit. You can fly it using the integrated M10 flypoints. Or you can just stack your full-range box right on top of the sub...the HD1801 ain’t picky.
So if you are looking for an extremely powerful, affordable PA setup that is simple to use, then you’re in the right place.
| Acoustic Performance | |
|---|---|
| Frequency Response (–10 dB) | 35 Hz – 145 Hz |
| Frequency Response (–3 dB) | 44 Hz – 95 Hz |
| Max Peak SPL (Calculated) | 133 dB |
| Max Peak SPL (Measured) | 129 dB |
| Transducer | |
| Diameter | 18" (457 mm) |
| Voice Coil Diameter | 4" (102 mm) |
| Diaphragm Material | Paper |
| Magnet Material | Ferrite |
| Power Amplifier | |
| Rated Power | 800W RMS 1600W Peak |
| THD | < 0.03% |
| Design | Class D |
| Cooling | Active, twin thermally controlled vari-speed fans |
| Input/Output | |
| Input Type | Female XLR Balanced differential (stereo left/right) |
| Input Impedance | 20kΩ |
| Full Range Output | Male XLR Balanced (parallel with input) |
| High Pass Output | Male XLR Balanced |
| Output Impedance | 300Ω |
| Level Control | –6 dB to +6 dB |
| Electronic Crossover | |
| Crossover Type | 24 dB/oct. Symmetrical Linkwitz-Riley |
| Crossover Frequency | 100 Hz |
| Protection | |
| Over-Excursion Protection | 40 Hz 24 dB/oct.; Butterworth High; Pass Filter |
| Thermal Protection | Amplifier mute, auto reset, twin thermally controlled vari-speed fans |
| Driver Protection | Peak/RMS Limiter |
| Display LEDs | Power Light ON, Polarity Invert, Thermal, Sig/Limit, Front Power ON |
| AC Power Requirements | 100-120 VAC, 50-60 Hz, 300W |
| AC Connector | 3-pin IEC 250 VAC, 15 A male |
| Construction Features | |
| Basic Design | Rectangular |
| Material | 15 mm exterior grade premium birch plywood |
| Finish | High durability black paint |
| Handles | One on each side |
| Grille | Powder-coated galvanized steel |
| Fly Points | Twelve M10 x 1.5 mm |
| Dimensions (H x W x D) | |
| Product | 23" (584 mm) x 23" (584 mm) x 25.8" (655 mm) |
| Shipping | 24.4" (620 mm) x 27.9" (709 mm) x 30.7" (780 mm) |
| Weight | |
| Net | 106 lbs (48.2 kg) |
| Shipping Weight | 115 lbs (52.2 kg) |
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.