The Roland M-300 V-Mixer is a live mixing console with high quality sound, powerful features, extensibility and ease of operation. It has a compact, highly portable chassis that is useable in any type of situation. The M-300 is perfect for use in live venues, touring and production, television and radio broadcasting/recording, as well as concert halls, educational institutions and houses of worship.
To achieve superior sound quality, the M-300's I/O unit(s) (Digital Snake) and the mixer (V-Mixer) are separate. Before A/D conversion, the input enters the discreetly designed, high-quality preamp, which is then digitally transmitted to the mixer over REAC protocol. By having the mic preamps closer to their source and by avoiding transmission losses of long runs of analog cables, audio has a chance to sound its best throughout the whole system.
The knobs and buttons for Preamp, EQ, and PAN are located on the front panel of the V-Mixer on the M-300 for intuitive, analog-like operation. Dedicated buttons for direct access to the patchbay and effects are also located on the front panel. With the on-board HELP system, it's easy to learn and operate the V-Mixer.
The V-Mixing System on the M-300 seamlessly integrates with the M-48 Live Personal Mixer allowing full control of set-up and mixing of any musician's M-48 directly from the V-Mixer interface. The M-48 is known worldwide for its unprecedented level of control and amazing sound quality.
The M-300 also allows for live recording of up to 40 channels. The demand for live recording has increased as live sound mixing has become digital. Connecting a PC for recording to the V-Mixing System is a simple Cat5e connection. Live recording of up to 40 channels is easily captured with SONAR DAW software from Cakewalk. Additionally, you can record a master mix directly from the V-Mixer to a USB flash drive.
| Number of Channels | 32 mixing channels/11 buses/4 MATRIX buses/Up to 92 inputs and 90 outputs when using REAC Devices |
|---|---|
| AD/DA Conversion | 24-bit/48.0 kHz or 44.1 kHz |
| Network Latency | 2.8 mS |
| CONSOLE INPUT jacks (1 to 4) | XLR-3-31 type (balanced, phantom power) |
| CONSOLE INPUT jacks (5 to 8) | 1/4 inch Phone type (balanced) |
| CONSOLE INPUT jacks (9 to 12) | RCA Pin type |
| CONSOLE OUTPUT jacks (1 to 4) | XLR-3-32 type (balanced) |
| CONSOLE OUTPUT jacks (5 to 8) | 1/4 inch Phone type (balanced) |
| PHONES jack | Stereo 1/4 inch phone type |
| DIGITAL OUT jack | Optical type |
| REAC port | RJ-45 EtherCon type x 2 |
| USB port | Type A x 1, Type B x 1 |
| Remote Connectors | RS-232C connector: 9-pin D-sub type MIDI connectors (OUT/THRU, IN): 5-pin DIN type |
| Other Connectors | Grounding terminal; AC INPUT connector |
| Frequency Response | CONSOLE OUTPUT jacks (1 to 8): -2 dB / +0 dB (20k ohms load, +4 dBu) PHONES jack: -3 dB / +0 dB (40 ohms load, 150 mW) |
| Total Harmonic Distortion + Noise | CONSOLE OUTPUT jacks (1 to 8): 0.05 % (typ., +4 dBu) PHONES jack: 0.05 % (typ., 40 ohms load, 150 mW) |
| Dynamic Range | CONSOLE OUTPUT jacks (1 to 8): 105 dB (typ.) |
| Crosstalk@ 1 kHz | CONSOLE INPUT jacks (1 to 4): -80dB (Pad: ON, Input sens: +4 dBu, typ.) CONSOLE INPUT jacks (5 to 12): -80dB (Input sens: +4 dBu, typ.) CONSOLE OUTPUT jacks (1 to 8): -100 dB (typ.) |
| Nominal Input Level (Variable) | CONSOLE INPUT jacks (1 to 4): -65 to -10 dBu (Pad: OFF) or -45 to +10 dBu(Pad: ON) CONSOLE INPUT jacks (5 to 12): -28 to +4 dBu |
| Input Impedance | CONSOLE INPUT jacks (1 to 4): 14 k ohms CONSOLE INPUT jacks (5 to 12): 10 k ohms |
| Non Clip Maximum Input Level | CONSOLE INPUT jacks (1 to 4): +8 dBu (Pad: OFF) or +28 dBu (Pad: ON) CONSOLE INPUT jacks (5 to 12): +22 dBu |
| Nominal Output Level | CONSOLE OUTPUT jacks (1 to 8): +4 dBu (Load impedance: 10 k ohms) |
| Output Impedance | CONSOLE OUTPUT jacks (1 to 8): 600 ohms; PHONES jack: 100 ohms |
| Recommended Load Impedance | CONSOLE OUTPUT jacks (1 to 8): 10 k ohms or greater; PHONES jack: 8 ohms or greater |
| Non Clip Maximum Output Level | CONSOLE OUTPUT jacks (1 to 8): +22 dBu (1 kHz, 10 k ohms load) PHONES jack: 150 mW + 150 mW (Typ., 1 kHz, 40 ohms load) |
| Residual Noise Level (IHF-A, typ.) | -88 dBu (All faders: Min) |
| Equivalent Input Noise Level (E.I.N.) | -126 dBu (Main Fader: Unity, Channel faders: Unity only 1 channel, Preamp gain: Max) |
| Display | 800 x 480 dots Wide VGA TFT color screen with backlight |
| Power Supply | AC 115 V, 117 V, 220 V, 230 V, 240 V (50/60 Hz) |
| Power Consumption | 50 Watts |
| Dimensions | 7.69" H x 18.56" W x 19.06" D (195 mm x 470 mm x 483 mm) |
| Weight | 22 lbs (9.8 kg) |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
