- Description
Details
Sennheiser CHG 70N Network-Enabled Charger for EW-DX Series
The Sennheiser CHG 70N is a network-enabled charger with two bays, capable of simultaneously charging up to two EW-DX SKM handheld and/or EW-DX SK bodypack transmitters with their respective BA 70 batteries inside. It can also recharge standalone BA 70 batteries. The Charger features an RJ45 network socket that supports the Media Control Protocol to provide remote control and status monitoring via the Sennheiser Control Cockpit software or a third-party application.
The CHG 70N operates on Power over Ethernet (PoE IEEE 802.3af Class 0) or on 12 VDC input voltage supplied from the EW-D POWER SUPPLY (available separately). Up to five chargers can be daisy-chained with only one PoE network connection or power supply needed—allowing you to recharge up to ten battery packs or transmitters at the same time.
Charging time for a full charge is approximately 3.5 hours (2 hours for 80% charge). A colored LED at each charging bay indicates charge status.
- Features
Features
- Charges EW-DX SK Bodypack Transmitters
- Charges EW-DX SKM Handheld Transmitters
- Charges BA70 Batteries
- Two Charging Bays
- Control and Monitoring via Network
- Cascade up to 5 Chargers
- 3.5-Hour Charging Time
- Power via PoE or Optional Power Supply
- Specification
Network Socket RJ-45, IEEE 802.3; 10base-T (half and full), 100base-TX (half and full) Charging Bays 2 Charging Capacity per Bay BA 70 rechargeable battery or EW-DX SK with BA 70 or EW-DX SKM with BA 70 Charging Status Indicator 1 LED per bay (red, yellow, green) Dimensions (H x W x D) 4.1" (104 mm) x 7.9" (200 mm) x 4.6" (116 mm) Weight 1.41 lbs (0.64 kg) - Documents
Documents
- In The Box
In The Box
- CHG 70N
- Quick Guide
- Safety Guide
Power supply not included
- Reviews
Write Your Own Review








