Shure PGXD14/85 Digital Wireless Lavalier Microphone System (Discontinued)

Shure PGXD14/85 Digital Wireless Lavalier Microphone System (Discontinued)

Name: Shure PGXD14/85 Digital Wireless Lavalier Microphone System (Discontinued)
Brand: Shure
SKU: SHURE-PGXD14/85
Price: 499 USD
Availability: OutOfStock

Write a Review

Part #:

PGXD14/85-X8

Model #:

PGXD14/85

Current Stock:

Availability: No Longer Available

Contact us for comparable solutions.

Certified Audio
Expertise

FREE Custom
System Design

Get Expert
Help Fast

Ask an Expert

Our expertly trained Sales Engineers are ready to help!

(888) 256-4112

The Shure PGXD14/85 Digital Wireless System, with state-of-the-art, 24-bit digital audio, delivers stunning sound and a strong, clean RF signal.

Description

The PGXD14/85 Lavalier Wireless System is part of the PGX-D wireless systems family.

PGX-D Digital Wireless, with state-of-the-art, 24-bit digital audio and trusted Shure microphones, delivers stunning sound and a strong, clean RF signal.

It includes the PGXD4 receiver, PGXD1 bodypack transmitter, WL185 lavalier microphone, tie clip, power supply, 2 AA batteries, carrying case, and user guide.

Features

PGXD4 Wireless Receiver:

24-bit / 48kHz digital technology for incredibly accurate sound
Automatic frequency selection locates a clear channel instantly
One-touch sync automatically syncs the transmitter and receiver
True digital diversity for rock-solid wireless signal reliability
Up to 5 compatible channels per frequency band
1/4" and XLR audio outputs
Included padded carrying case for portability and protection

PGXD1 Wireless Bodypack Transmitter:

Rugged, compact bodypack with belt clip
20 Hz – 20 kHz frequency range captures every nuance of tone
Power, mute, and battery status LED
200 ft (60 m) operating range
Up to 10 hours of continuous use from 2 AA batteries
Recessed dial on side provides 26 dB of continuously adjustable gain
Lockable interface prevents accidental setting change

WL185 Lavalier Microphone:

Recommended for general purpose sound reinforcement applications requiring good rejection of ambient noise
Use of windscreen highly recommended
Pickup angle 130 degrees

Specifications

PGXD4 Wireless Receiver
Audio Output Level	XLR connector (into 3000 Ω load): -2.5 dBV, 1/4" connector (into 10000 Ω load): +10 dB
Impedance	XLR: 50 Ω, 1/4 inch: 50 Ω
Sensitivity	-102 dBm @ 10-5 BER
Image Rejection	> 70 dB, typical
Housing	ABS
XLR Output	Impedance balanced Pin 1: Ground (cable shield) Pin 2: Audio Pin 3: No Audio
Audio LED	Red: 2 dB below clip, Amber: 12 dB below clip, Green: 50 dB below clip
Power Requirements	12-18 Vdc at 150 mA, supplied by external power supply
Pin Assignments	XLR: 1=ground, 2=hot, 3=cold 6.35 mm (1/4") TRS: Tip=audio, Ring=no audio, Sleeve=ground
Dimensions (H x W x D)	1.6" (40 mm) x 7.125" (181 mm) x 4.1" (104 mm)
PGXD1 Bodypack Transmitter
Audio Input Level	+10 dBV maximum, at minimum gain setting, -16 dBV maximum, at maximum gain setting
Gain Adjustment Range	26 dB
Input Impedance	1 M ohms
RF Output Level	RF Output Level 10 mW maximum (dependent on applicable country regulations)
Housing	Molded polycarbonate case
Power Requirements	2 AA batteries
Battery Life	Up to 10 hours
Dimensions (W x H x D)	4.25" (108 mm) x 2.50" (64 mm) x 0.75" (19 mm)
Weight (without Batteries)	0.28 lbs (0.13 kg)
WL85 Lavalier Microphone
Type	Condenser (electret bias)
Frequency Response	50 to 17,000 Hz
Output Impedance	1800 ohms
Sensitivity (1 Pa = 94 dB SPL)	-45.5 dBV/Pa
Maximum Sound Pressure Level	130.5 dB SPL
Output Noise (A-Weighted)	28.0 dB SPL
Dynamic Range	102.5 dB