With the SurgeX CM-1115-RT18 Surge Eliminator with Power Strip, power distribution is neatly organized at the back of the rack and provides easy access to the power cable configuration, eliminating the need to install the custom length power cords that large racks require. They feature a remote interface with indicator LED, over/under voltage protection LED, power on/off LED, self-test LED, and two power configurations for easy power management.
Incorporated with the patented SurgeX Advanced Series Mode® surge elimination technology, it is superior to conventional protectors and insures the highest level of protection against damaging surges, spikes, over voltage, EMI/RFI noise, and wiring faults. They are completely non-sacrificial and eliminate all surge energy without producing harmful side effects such as ground contamination or common-mode disturbances. SurgeX Space Savers are the ultimate audio visual protection solution when space is at a premium.
The Space Saver products also incorporate contact closure and applied DC voltage remote control capabilities. Two or more CM or VM products can be connected together to provide control and power conditioning for larger systems. They can also control other SurgeX products with their auxiliary relay contacts and/or its 12V DC output.
A plug-in Phoenix terminal block on the rear panel accommodates the remote control connections and also the low-voltage outputs. There are three inputs which control power state; one 12V DC output; and one auxiliary relay providing normally-open contacts. The inputs can be controlled by an applied DC voltage from 5V to 30V, or by a contact closure. The inputs and 12V DC output are designed to withstand incorrect connections including polarity reversal and shorts.
| Operational Voltage Range | 90 to 150 Volts AC |
|---|---|
| Current rating | 15/20 Amps |
| Power Rating | 1,800/2,400 Watts |
| Maximum Load Inrush Energy | 1000 Joules total during power-up |
| Under-Voltage Shutdown | 90 V (resume at 100V) |
| Over-Voltage Shutdown | 145V (resume at 135V) |
| Surge Let-through Voltage | Zero let-through Voltage for a 6000 Volt surge |
| Meets Federal Guidelines | Grade A, Class 1, Mode 1 (CID A-A-55818) |
| EMI/RFI Filter, Normal Mode | 40 dB @ 100 KHz, 50dB @ 300 KHz, 50 dB @ 3 MHz,50 dB @ 30 MHz (50 Ohm load) |
| EMI/RFI Filter, Common Mode | 18dB @ 300 KHz, 30 dB @ 1 MHz, 50 dB @ 5 MHz,50 dB @ 20 MHz (50 Ohm load) |
| Maximum Applied Surge Voltage | 6,000 Volts |
| Maximum Applied Surge Current | Unlimited (due to current limiting) |
| Maximum Applied Surge Energy | Unlimited (due to current limiting) |
| Endurance | (C62.41-1991 category B3 pulses), 1 KV > 500,000; 3 KV > 10,000; 6 KV > 1000 |
| Number of Outlets | 2, 8, 18, or 24; Model Dependent |
| Remote Control Voltage | 5 to 30 Volts DC |
| Remote Control Current Draw | 4 mA maximum |
| Contact Closure Max. Resistance | 100 Ohms |
| Auxiliary Relay Contact Rating | 30 Volts DC at 1 Amp |
| 12 Volt Output Max. Current | 20 mA |
| Temperature Range | 5°C to 35°C |
| Humidity Range | 5% to 95% R.H. Non-condensing |
| Power Strip Dimensions (H x W x D) | 1.5" (38.1 mm) x 1.625" (41.275 mm) x 48" (1219.2 mm) |
| Dimensions (H x W x D) | 5.66” (143.764 mm) x 4.95” (125.73 mm) x 9.50” (241.3 mm) |
| Power Strip Weight | 5.8 lbs (2.63 kg) |
| Weight | 8.5 lbs (3.854 kg) |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
