Tannoy CMS401DCE Ceiling Monitor System - Pair (Discontinued)

By Tannoy

Tannoy CMS401DCE Ceiling Monitor System - Pair (Discontinued)

Write a Review

Part #:

8001 4080

Model #:

CMS401 Dce

Current Stock:

Availability: No Longer Available

Contact us for comparable solutions.

Certified Audio
Expertise

FREE Custom
System Design

Get Expert
Help Fast

Ask an Expert

Our expertly trained Sales Engineers are ready to help!

(888) 256-4112

The award-winning CMS401 DCe Ceiling Monitor System is suited to BGM and speech reinforcement applications requiring exceptionally high sonic performance and reliability in applications.

Description

Specifically designed for fast, simple and cost effective installation in new and existing buildings, the 100mm (4") point-source Dual Concentric driver can be entirely angled towards the listener within the fixed ceiling mounting ring.

The drive unit is mounted in an injection-moulded swivelling pod. This, like the ceiling mounting ring in which the pod rotates, is manufactured from UV/weather resistant UL94V-0 ABS material. When mounting the speaker the three self-aligning clamps locate the speaker while at the same time locking the pod angle securely.

The challenge of difficult speaker placement in less than ideal room configurations, is therefore eliminated by being able to discreetly pivot the loudspeaker towards the desired area of coverage.

The inclusion of a premium quality Tannoy THP 30 multi-tap transformer, for distributed line operation, provides high system sensitivity, wide bandwidth and dynamic range; achieved with very low insertion loss. Each device is packaged with tile rails and C-ring for quick & easy installation and simple stocking logistics. A plaster (mud) ring is available as an optional accessory.

Features

100mm (4.00") Dual Concentric™ driver for greater durability and longevity.
High power & high sensitivity with extended frequency response.
Wide, controlled constant directivity dispertion for optimum coverage.
Does not suffer from massive loss of energy in the vertical plane at crossover caused by two way discrete designs.
UV/weather resistant UL94V-0 ABS construction for structural integrity.
Low insertion loss 30 W line transformer.
Packaged with tile rails and C-ring for quick & easy installation and simple stocking logistics.
3 clamp self-aligning mounting system.

Specifications

Frequency Response (-3dB) (1)	110Hz - 50kHz
Frequency Range (-10dB) (1)	80Hz - 54kHz
System Sensitivity (1W @1m) (2)	88dB (1W = 2.83V for 8 Ohms)
Nominal Coverage Angle	90 Degrees Conical
Coverage Angle (1kHz to 6kHz)	123 degrees
Directivity Factor (Q)	4.6 averaged 1kHz to 6kHz
Directivity Index (DI)	6.0 averaged 1kHz to 6kHz
Rated Maximum SPL	106dB (average)112dB (peak)
Power Handling (3)	Average: 60W Programme: 120W Peak: 240W
Recommended Amplifier Power	120W @ 8 Ohms
Nominal Impedance	8 Ohms
70V	30W / 15W / 7.5W / 3.75W / OFF& Low Impedance operation
100V	30W / 15W / 7.5W / OFF& Low Impedance operation
Crossover	2.5kHz - 2nd order LF, 2nd order HF(with dynamic HF protection)
Low Frequency	1 x 100mm (4.00") Dual Concentric™constant directivity driver with multi fibrepaper pulp cone
High Frequency	19mm (0.75") titanium dome withneodymium magnet system
Back can	Reflex loaded UL 94V-0 rated ABS
Baffle	Reflex loaded UL 94V-0 rated ABS
Grille	Steel, with weather resistant coating
Safety Features	Safety ring located at rear of enclosure forload bearing safety bond
Back Can	Complete with fixed backca
Connectors	Removable locking connector with screwterminals with "loop through" facility
Hole Cutout Diameter	187mm (7.36")
Included Accessories	C Ring, tile bridge, paint mask,cutout template, grille
Optional Accessories	Plaster (Mud) Ring
Dimensions	Bezel diameter: 205mm (8.07"), Front of Ceiling to Rear of Pod: 147.6mm (5.81")
Net Weight (ea)	6.00 lbs (2.725 kg)