Audix W3HT2 Wireless Bodypack System with HT2 Headset

Home /
Audix W3HT2 Wireless Bodypack System with HT2 Headset (Discontinued)

Description

Details

The Audix W3HT2 is a RAD360 wireless system with an HT2 headset designed for a wide range of professional applications including live performances, fixed installations, corporate meetings, education and Houses of Worship.

The RAD360 systems features easy-to-use and easy-to-read menu driven displays in every component of the system. Both the receiver and the transmitter are synthesizer controlled via Phase Locked Loop (PLL) for stable Radio Frequency (RF) signals.

The body pack transmitter, constructed of durable ABS composite, is housed in a protective metal cradle. It may be used with lavaliere, headset and specialty instrument microphones.

The HT2 is a professional pre-polarized headset condenser microphone for stage, presentation and broadcast. It is known for its excellent sonic characteristics, low profile, comfort and sound isolation. Designed for use with the Audix RAD360 Wireless System, the HT2 is also available in a wired version (HT2P). With a uniformly controlled supercardioid polar pattern, the HT2 captures vocals from a comfortable distance of 2"-3" off axis. The HT2 handles very high SPLs without distortion. Easy to position and lightweight, the HT2 is manufactured with very tight tolerances. This mic has a rubber coated metal frame, a high performance 5 mm capsule and has a 3' high quality cable terminating in a space saving mini-XLRf connector.

Features

Features

General:

Frequency agile
Soft-key controls
Backlit LCD menu driven displays
Noise squelch circuitry analyzes signal quality
Surface Acoustic Wave (S.A.W.) filters RF resistance
Tone key squelch eliminates unwanted noise
Tuned antennas
Audio output
RF level meters
Audio meters
Battery power indicators
Easy to use set and lock function
Sensitivity adjustment
Interchangeable head assemblies
Durable metal housings

HT2 Wireless Headset:

Lightweight and comfortable
Hands free, headworn vocal mic
Excellent for live sound vocals
Adjustable and durable construction

Specification

General
Switchable Frequencies	193 (per system group of 24 MHz spaced 125 kHz apart)
Frequency Response	40 Hz–18 kHz (depending on capsule)
Signal-to-Noise Ratio	>110 dB
Compander System	HDX
Pilot Tone	32.768 kHz
R360 Receiver
Receiving System	Dual tuners, true diversity receiver
Image Rejection	50 dB nominal, 45 dB minimum
Signal-to-Noise Ratio	110 dB @ 30 kHz deviation (IEC-weighted), max modulation 75 kHz
Total Harmonic Distortion	1% (10 kHz deviation at 1 kHz)
Sensitivity	26 dBμV (S/N 60 dB at 5 kHz deviation, IEC-weighted) <2.5μV
Intermediate Frequency	55.875 MHz, 10.7 MHz
Audio Output (AF Level Set At “0”)	Unbalanced: 40 mV (at 1 kHz, 10kHz deviation, 10k ohm load) Balanced: 8mV (at 1 kHz, 10kHz deviation, 600 ohm load)
Output Connectors	Unbalanced: 1/4” phone jack Balanced: XLR
Nominal Peak Deviation	Balanced: -24 to +18dBu Unbalanced: -30 to +12dBu (adjustable in 6 dB-steps)
Adjacent Channel Rejection	>68 dB
Intermodulation Spacing	>68 dB
Image Rejection	>72 dB
Power Supply	120V AC 60 Hz; 12-18V DC, 350 mA, with external supply
Dimensions (H x W x D)	1.1" (38 mm) x 8.35" (212 mm) x 6.5" (165 mm)
Net Weight	2.32 lbs (1.05 kg)
B360 Bodypack
RF Power Output	50 mW Max
Spurious Emissions	Under federal regulations
Input Connector	3 pin mini-XLR
Input Controls	Mic/line switch, and 20 dB potentiometer
Current Consumption	100 mA typical
Input Impedance	Mic: 10k Ohm; Line: 1M Ohm
Max Sound Pressure Level	approx. 128–140 dB (depending on mic)
Dimensions (H x W x D)	2.8" (71.3 mm) x 4" (104 mm) x 1" ( 27 mm)
Weight (with Battery)	0.450 lbs (0.204 kg)
HT2 Headset
Transducer Type	Pre-Polarized Condenser
Frequency Response	50 Hz - 15 kHz
Polar Pattern	Supercardioid
Output Impedance	250 Ohms balanced
Sensitivity	4 mV / Pa @ 1k
Equivalent Noise Level	26 dB (A weighted)
Signal-to-Noise Ratio	68 dB
Maximum SPL	≥140 dB
Cable/Connector	Miniature 3 pin or 4 pin (HT54PIN) XLRf connector
Polarity	Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
Housing/Finish	Flexible steel alloy / Black
Weight	0.149 lbs (0.068 kg)

Documents