Lowell Manufacturing

The Lowell WB-8 Steel Grille is the industry standard when it comes to a steel ceiling grilles for 8" loudspeakers or for use with Lowell’s UNIHORN TM Model LUH-15T.

The Lowell 50LVC-SW volume control is a 50W autoformer attenuator (volume control) with 3dB steps is for use with 100/70/25V or 8ohm speaker line (depending on model selected). Includes 1-gang standard wall plate with rotary knob. Wall plates are offered in variety of finishes. ETL Listed.

The Lowell 50LVC-SA volume control is a 50W autoformer attenuator (volume control) with 3dB steps is for use with 100/70/25V or 8ohm speaker line (depending on model selected). Includes 1-gang standard wall plate with rotary knob. Wall plates are offered in variety of finishes. ETL Listed.

The Lowell 100LVC-DW volume control is a 100W autoformer attenuator (volume control) with 1.5 or 3dB steps for use with 100/70/25V speaker line. It includes a decora wall plate with rotary switch. It has an optional priority relay for emergency bypass and is ETL Listed.

The Lowell 100LVC-DB volume control is a 100W autoformer attenuator (volume control) with 1.5 or 3dB steps for use with 100/70/25V speaker line. It includes a decora wall plate with rotary switch. It has an optional priority relay for emergency bypass and is ETL Listed.

The Lowell 100LVC-DA volume control is a 100W autoformer attenuator (volume control) with 1.5 or 3dB steps for use with 100/70/25V speaker line. It includes a decora wall plate with rotary switch. It has an optional priority relay for emergency bypass and is ETL Listed.

The Lowell 100LVC-DSB volume control is a 100W autoformer attenuator (volume control) with 1.5 or 3dB steps for use with 100/70/25V speaker line. It includes a decora wall plate with rotary switch. It has an optional priority relay for emergency bypass and is ETL Listed.

The Lowell 100LVC-DSW volume control is a 100W autoformer attenuator (volume control) with 1.5 or 3dB steps for use with 100/70/25V speaker line. It includes a decora wall plate with rotary switch. It has an optional priority relay for emergency bypass and is ETL Listed.

The Lowell 10KLVC-DW Potentiometer Volume Control features continuous steps and a variety of options (10k ohm, 50 ohm pot, and more). It includes Decora® wall plate and is ETL Listed. It has a 10k ohm linear taper control for single-point remote level adjustment of voltage controlled amplifiers (VCA) by others.

The Lowell ES-4T 4" in-ceiling speaker is a self-contained, recessed, in-ceiling speaker system with a 4" dual cone, full range driver has a high-frequency whizzer cone to provide the kind of crisp, high frequency response that would typically only be produced by a coaxial speaker design.

The Lowell 200LVC volume control is a stainless steel assembly designed to fit within a 2-gang E.O.Box with a minimum depth requirement of 2.5", including a mud ring if used. Ideal for applications requiring a powerful, durable, and non-corrosive wall plate mounted control.

The Lowell LBS8-R1 tile bridge for 8 inch speakers distributes the speaker's weight to the ceiling support structure, reducing the likelihood of tiles sagging under the weight of heavy speakers.

Recessed steel enclosure (for use with 8 in. driver, screw-mount grille) has top knockout and foam disc. Optional side knockouts and mounting straps. Slightly tapered for stacking.

This Lowell ES-4-RIB rough-in bridge is designed to be mounted in new construction, drywall or plaster ceiling before finished ceiling is installed to serve as a placeholder for ES-4T ceiling speakers.

This Lowell ES-6-RIB rough-in bridge is designed to be mounted in new construction, drywall or plaster ceiling before finished ceiling is installed to serve as a placeholder for ES-52T ceiling speakers.

The Lowell ES-4-RTR trim ring for retrofit applications where speaker model ES-4T is installed in an existing standard 8 inch speaker enclosure with 11.25 inch diameter mounting bolt circle.

The Lowell ES-6-RTR trim ring is for retrofit applications where speaker ES-62T or ES-52T is installed in an existing standard 8 inch speaker enclosure with 11.25 inch diameter mounting bolt circle.

The Lowell XC984 is a recessed steel backbox that is undercoated to eliminate acoustic/metallic resonance and features a foam pad lining, side knockouts and flat mounting flange.

The Lowell 50LVC volume control is a 50W autoformer attenuator (volume control) with 3dB steps is for use with 100/70/25V or 8ohm speaker line (depending on model selected). Includes 1-gang standard wall plate with rotary knob. Wall plates are offered in variety of finishes. ETL Listed.

This Lowell ES-8-RIB rough-in bridge is designed to be mounted in new construction, drywall or plaster ceiling before finished ceiling is installed to serve as a placeholder for ES-82CDT, ES-8TSUB, or ES-82T ceiling speakers.

The Lowell 25LVC-DB volume control is a 25W autoformer attenuator (volume control) with 3dB steps, It's great for use with a 100/70/25V speaker line. It includes a 1-gang standard wall plate with a rotary knob in variety of colors and is ETL Listed.

The Lowell CP84 is a recessed steel backbox for use with an 8" or 6.5" driver and screw-mount grille is undercoated to eliminate acoustic/metallic resonance. Includes foam pad lining, side knockouts, and extended lip for cutouts in sheetrock or plaster.

The Lowell 100 LVC volume control is a 100W autoformer attenuator (volume control) with 1.5 or 3dB steps for use with 100/70/25V speaker line. It includes a standard wall plate with rotary switch. It has an optional priority relay for emergency bypass and is ETL Listed.