Inputs Cards & Modules

The TOA SP-11N AM 900 Series SIP Module ia a VoIP phone paging module supported SIP (Session Initiation Protocol) with Auto-answer function.  It can be connected to an IP network and directly registered as one SIP phone station on various SIP server...

TOA Electronics NM-01 Noise Masking Module for TOA's 9000M2, 900, 700 and BG-2000 Series Amplifiers This module generates a noise source to be used for sound masking and audio privacy applications. Such applications include open-plan office environments...

The left and right audio signals received on pairs B and C of the twisted pair cable are amplified and fed to the left and right channels of the output 3.5 mm Mini-jack. The front panel provides the headphone output jack and a single-turn user volume...

The BLU-Si card is a 32 x 32-channel interface that connects to a BLU link digital audio bus via a standard Cat 5e cable. The BSS BLU-Si card works with these Soundcraft mixing consoles and a wide variety of HARMAN products equipped with BLU link...

The D-921F Microphone Line Input Module is a 2-channel microphone/line input module designed for use with the D-901 Digital Mixer, etc. It is equipped with XLR connectors. Input sensitivity and phantom power setting can be performed at the main frame...

The D-921E Microphone Line Input Module is a 2-channel microphone/line input module designed for use with the D-901 Digital Mixer, etc. It is equipped with removable terminal block type connectors. Input sensitivity and phantom power setting can be...

The TOA D-001R Line Input Module is a plug-in module designed for use with the 9000 Series. It has 2-channel unbalanced inputs of RCA jacks. Input signals to both channels are mixed together. The D-001R can process effect for TONE/EQ/COMPRESSOR to...

Bogen Communications VAR1 Voice-Activated Relay for Paging Systems The Bogen Communications VAR1 Voice-Activated Relay is a DPDT relay device that is activated when an audio signal is detected at the microphone preamp or at 70V, 25V, or 600-ohm...

The TOA U-14R Jukebox Override is a plug-in type Input Priority module designed to be used in conjunction with TOA's 900 Series and BG-1000 Series amplifiers.  The U-14R is equipped with 2 inputs: BGM and JUKE, and the JUKE input has priority over...

The TOA U-43S Unbalanced Line Input with High/Low Cut Filters and Mute-Send is an AUX module to be used in conjunction with the 900 series and AX-1000 amplifier. It has a voice-activated muting control output. Has dual removable terminal block...

The U-43R Unbalanced Line Input with High/Low Cut Filters and Mute-Send is an AUX module to be used in conjunction with the 900 series and AX-1000 amplifier. It has a voice-activated muting control output. Has dual RCA jacks with passive summing, gain...

The TOA U-13S is an unbalanced line input with high/low cut filters, removable terminal block, and gain control. The U-13S is an AUX module to be used in conjunction with the 900 series or AX-1000 amplifier. It has an input that can control muting...

The U-03S is an AUX module to be used in conjunction with the 900 series and AX-1000 amplifier. It has a low-cut and high-cut filter, gain control and a removable terminal block connector. For unbalanced,line level equipment. such as AM/FM tuners, tape...

The TOA U-11R is an unbalanced line input with mute-receive. The line input module is to be used in conjunction with the 900 series components and other TOA's equipment. It has an unbalanced line input with RCA pin jack connector, mute-receive function,...

The D-981 Remote Control Module is a remote control module designed for use with the D-901 Digital Mixer, etc. It permits preset memory recall, input/output channel volume control, stereo input selection and channel ON/OFF operation to be remotely...

The TOA D-971R Line Output Module is a 4-channel line output module designed for use with the D-901 Digital Mixer, etc. It is equipped with standard RCA pin jacks.

The line-level output is capable of driving either high or low impedance, balanced or unbalanced loads. The ST-MX3 operates from floating or bipolar dc power. For installations with microphone level inputs, use the ST-UMX3 Universal Audio Mixer.

The TOA D-971M Line Output Module is a 4-channel module designed for use with the D-901 Digital Mixer, etc. It is equipped with XLR connectors.

The D-971E Line Output Module is a 4-channel line output module designed for use with the D-901 Digital Mixer, etc. It is equipped with removable terminal block type connectors.

TOA S-04S T Switch-Selectable Tone Generator The S-04S T switch-selectable tone generator generates one of four tones via switch-closure. Can be used for doorbell, paging, door/gate release, telephone night ringer, annunciator, class change or...