The V2-26W in white is a versatile dual 6.5" two-way full-range loudspeaker designed for fixed installations where compact size, clarity, and reliable performance are essential. Delivering extended low-frequency and midrange response compared to the smaller V2-6, it is well-suited for distributed sound systems in cafes, restaurants, shopping centers, airports, and other commercial environments. When paired with a subwoofer such as the V2-212S, the V2-26W produces broad-spectrum, high-fidelity sound that far exceeds expectations for its size.
In larger venues such as auditoria, theaters, and houses of worship, the V2-26W excels as a delay or fill speaker, ensuring even coverage and consistent tonal balance throughout the space. Its 90° H x 70° V dispersion pattern, frequency-shaded woofers, and constant-directivity rotatable horn deliver smooth, controlled sound whether mounted vertically or horizontally. Flexible installation is supported with the included yoke bracket and 10°/20° vertical standoffs, wall or ceiling mounting options, and M6 rigging points.
Engineered for reliability and long-term use, the V2-26W includes Dyna-Tech driver protection circuitry, a ferrofluid-treated HF driver for enhanced heat dissipation, and Carbon Ring Cone Technology for increased piston area and excursion capability. With terminal strip and NL4-compatible connectors, it integrates seamlessly into both distributed and performance audio systems. Fully compatible with Community ALC404D controllers, with higher-power ALC models also supported, the V2-26W is a durable, discreet, and professional solution for modern audio installations.
| Operating Range | 70 Hz to 18 kHz (-10 dB) |
|---|---|
| Frequency Response | 90 Hz to 16 kHz (±3 dB) |
| Max Input Ratings | 200W continuous, 500W program 28.3 volts RMS, 56.7 volts momentary peak |
| Sensitivity (1W/1m) | 92 dB (100 Hz to 12.5 kHz) free space |
| Maximum Output | 115 dB SPL / 121 dB SPL (peak) |
| Nominal Impedance | 4 ohms |
| Minimum Impedance | 3.5 ohms @ 220 Hz |
| Nominal –6 dB Beamwidth | 90° H x 70° V (in vertical position) |
| Crossover Frequency | 1.3 kHz |
| Recommended Signal Processing | 80 Hz, 24 dB/octave Butterworth high pass filter |
| Drivers | LF 2 x 6.5" cone HF 1 x 1" |
| Driver Protection | DYNA-TECH protection circuitry |
| Input Connection | NL4-compatible locking connector with terminal strip in parallel |
| Enclosure | Trapezoidal (22.5° included angle) 18 mm, 11-ply cross-laminated birch |
| Mounting/Rigging Provisions | 9 x M6 threaded rigging fittings 4 x M6 threaded fittings for third-party suspension products |
| Finish | Catalyzed polyester two-part paint, white |
| Grille | Powder coated steel, white finish |
| Dimensions (H x W x D) | 22.5" (573 mm) x 9.8" (249 mm) x 10.1" (258 mm) |
| Weight (incl. Bracket) | 28.1 lbs (12.7 kg) |
| Shipping Weight | 38.1 lbs (17.28 kg) |
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
Usually arrives in 5-9 business days.
