Accessories

The DS-XLR2 is XLR 3-pin Female & 3-pin Male on Decora Wall Plate, Solder type.

Juice Goose JG 11-20A Power and convenience for higher current applications, the JG 11-20A has an amp circuit breaker, switch, wiring, and power cord - all the features required for heavier commercial and industrial applications. Note: The NEMA 5-20P...

The WPU1004 is a blank wall plate with a single gang 1x D Series punch out. It is made with a brushed stainless steel finish.

The WP3004 is a triple gang wall plate with six 3-conductor XLR-M connectors. It is made with a brushed stainless steel finish.

The Rolls MU118 Digital Multimeter with Frequency Measurement and Temperature sensor.Too many features to list here, look at the picture carefully. Uses standard 9v battery (included)Click on "Larger Image" for a better look.

The TSD-DCPDV is designed to distribute power to TSD devices or other equipment requiring DC power and is also ideal for use with wireless microphones that typically require 12-18VDC PSUs. Rear panel includes one 9-24V input for a user selectable power...

The Atlas Sound TSD-DCPDV is designed to distribute power to TSD devices or other equipment requiring DC power without the need for separate power supplies. One 9-24V PSU input is distributed to 6 independent, isolated outputs.The compact TSD-DCPD will...

The DB-1's simple design offers reliable input jacks as well as a loop-through 1/4 inch jack.  Plug any instrument level signal (and some line level) into the box, interface with a standard XLR mic cable into the Lo-Z output and you're ready to...

The WP2023 is a wall plate with four neutrik locking 1/4 inch TRS connectors. It is made with a brushed stainless steel finish.

The WP2021 is a wall plate with dual neutrik locking 1/4 inch TRS connectors. It is made with a brushed stainless steel finish.

The Radial Engineering J+4 is a stereo interface designed to accept consumer level -10dB unbalanced high impedance signals and convert them to +4dB balanced low impedance signals for easy manipulation in professional level environments such as...

The Radial Twin-Iso is a high performance two channel balanced line-level isolator for professional touring, sound installation, broadcast and studio that provides isolation between various pieces of audio equipment such as consoles, amp racks, remote...

Radial ProRMP Studio Reamper For years, Reamping has been the ‘secret weapon’ for countless recordings by the biggest names in the business! Few realize that recording engineers not only Reamp guitars, but often Reamp bass, keyboards, drums...

Radial ProAV1 Passive Multimedia Direct Box The ProAV1 is a passive direct box specifically designed for audio-video integrators and technicians, featuring a variety of stereo inputs that are summed to mono via a resistive mixer, greatly simplifying...

The DTI (Dual Transformer/Isolator) is a high quality totally passive audio interface that uses a pair of high-performance transformers to totally separate input and output signal grounds, thereby isolating two systems and reducing hum and ground-loop...

The WP1063 is a wall plate with two XLR-F and 1/4 inch TRS-F combo jacks. It is made with a brushed stainless steel finish.

The WP1062 Wall Plate with Neutrik Combo XLR Female and 1/4" TRS connectors. Made with a brushed stainless steel finish.

The WP1055 is a wall plate with one XLR-F and one locking 1/4 inch TRS connectors. It is made with a brushed stainless steel finish.

Radial Engineering ProD8 Eight-Channel Rackmount Direct Box The ProD8 is a high-density rackmount 8-channel 19" direct box that is specifically designed to interface keyboards and pre-recorded backing tracks to the PA system with redundant inputs for...

The ECM-15SH features noise filtering for removing unwanted Radio Frequency Interference (RFI) and EMI filters. This reduces the noise from Electromagnetic Interference (EMI) caused by items such as electric motors or switching power supplies. If an AC...