Shure PGXD24/BETA58A Digital Wireless Microphone System (Discontinued)

Shure PGXD24/BETA58A Digital Wireless Microphone System (Discontinued)

Name: Shure PGXD24/BETA58A Digital Wireless Microphone System (Discontinued)
Brand: Shure
SKU: SHURE-PGXD24/BETA58A
Price: 459 USD
Availability: OutOfStock

Write a Review

Part #:

PGXD24/BETA58-X8

Model #:

PGXD24/BETA58A

Current Stock:

Availability: No Longer Available

Contact us for comparable solutions.

Certified Audio
Expertise

FREE Custom
System Design

Get Expert
Help Fast

Ask an Expert

Our expertly trained Sales Engineers are ready to help!

(888) 256-4112

The PGXD24/BETA58A is Digital Handheld Wireless Microphone System. Includes PGXD4 Wireless Receiver and BETA58A Handheld Microphones.

Description

The PGXD24/BETA58A is Digital Handheld Wireless Microphone System. Includes PGXD4 Wireless Receiver and BETA58A Handheld Microphones.

The Shure PGXD4 receiver offers innovative 24-bit, 48 kHz digital audio technology for wireless that sounds like wired. True digital diversity means two antennas and two independent receivers are constantly working to provide rock-solid RF signal, and one touch scan finds a clear frequency instantly, making set up a snap.

The Shure Beta 58A is a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. It has become a leading choice among vocalists and touring professionals worldwide.

The Beta 58A maintains a true supercardioid pattern throughout its frequency range. The Beta 58A has a shaped frequency response that is ideal for close-up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille.

Features

PGXD4 Features:
24-bit / 48kHz digital technology for incredibly accurate sound.
Automatic frequency selection locates a clear channel instantly.
One-touch sync automatically syncs the transmitter and receiver.
True digital diversity for rock-solid wireless signal reliability.
Up to 5 compatible channels per frequency band.
1/4" and XLR audio outputs.
Included padded carrying case for portability and protection.
BETA 58A Features :
Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect.
Uniform supercardioid pattern for high gain before feedback and superior rejection of off–axis sound.
Neodymium magnet for high signal–to–noise output.
Hardened steel mesh grille that resists wear and abus.
Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration.
Minimally effected by varying load impedance.
Legendary Shure quality and reliability.

Specifications

Audio Output Level (ref. ± 38 kHz deviation, 1 kHz tone)	XLR connector (into 3000 Ω load): -2.5 dBV, 1/4 inch connector (into 10000 Ω load): +10 dB
Impedance	XLR: 50 Ω, 1/4 inch: 50 Ω
Sensitivity	-102 dBm @ 10-5 BER
Image Rejection	> 70 dB, typical
Housing	ABS
XLR Output	Impedance balanced Pin 1: Ground (cable shield) Pin 2: Audio Pin 3: No Audio
Audio LED	Red: 2 dB below clip, Amber: 12 dB below clip, Green: 50 dB below clip
Power Requirements	12-18 Vdc at 150 mA, supplied by external power supply
Pin Assignments	XLR: 1=ground, 2=hot, 3=cold 6.35 mm (1/4") TRS: Tip=audio, Ring=no audio,Sleeve=ground
Dimensions (W x H x D)	7.125 in x 1.6 in x 4.1 in (181 mm x 40 mm x 104 mm)
Type	Dynamic (moving coil)
Frequency Response	50 to 16,000 Hz
Polar Pattern	Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency
Output Level (at 1,000 Hz)	Open Circuit Voltage: -51.5 dBV/Pa* (2.6 mV), *1 Pa = 94 dB SPL
Impedance	Rated impedance is 150 ohms
Case	Silver blue enamel-painted die cast metal with hardened
Net Weight	278 grams (9.92 oz)