Shure PGXD24/SM86 Digital Wireless Microphone System (Discontinued)

Shure PGXD24/SM86 Digital Wireless Microphone System (Discontinued)

Name: Shure PGXD24/SM86 Digital Wireless Microphone System (Discontinued)
Brand: Shure
SKU: SHURE-PGXD24/SM86
Price: 449 USD
Availability: OutOfStock

Write a Review

Part #:

PGXD24/SM86-X8

Model #:

PGXD24/SM86

Current Stock:

Availability: No Longer Available

Contact us for comparable solutions.

Certified Audio
Expertise

FREE Custom
System Design

Get Expert
Help Fast

Ask an Expert

Our expertly trained Sales Engineers are ready to help!

(888) 256-4112

The PGXD24/SM86 is Digital Handheld Wireless Microphone System. Includes PGXD4 Wireless Receiver and SM86 Handheld Microphones.

Description

The PGXD24/SM86 is Digital Handheld Wireless Microphone System. Includes PGXD4 Wireless Receiver and SM86 Handheld Microphones.

The Shure PGXD4 receiver offers innovative 24-bit, 48 kHz digital audio technology for wireless that sounds like wired. True digital diversity means two antennas and two independent receivers are constantly working to provide rock-solid RF signal, and one touch scan finds a clear frequency instantly, making set up a snap.

The Shure SM86 is a unidirectional (cardioid) condenser vocal microphone for professional use in live performance. An extremely rugged microphone, the SM86 withstands the rigors of touring while delivering a clear, studio-quality sound.

Features

PGXD4 Features:
24-bit / 48kHz digital technology for incredibly accurate sound.
Automatic frequency selection locates a clear channel instantly.
One-touch sync automatically syncs the transmitter and receiver.
True digital diversity for rock-solid wireless signal reliability.
Up to 5 compatible channels per frequency band.
1/4" and XLR audio outputs.
Included padded carrying case for portability and protection.
SM86 features:
Condenser cartridge for studio quality sound.
Tailored frequency response for a clear reproduction of vocals.
Rugged construction withstands the rigors of touring sound.
Cardioid polar pattern minimizes unwanted background noise.
Excellent choice for stage monitors and personal monitors.
Built-in three-point shock mount minimizes handling noise.
Two-stage "pop" filter reduces wind and breath noise.

Specifications

Audio Output Level	XLR connector (into 3000 Ω load): -2.5 dBV, 1/4 inch connector (into 10000 Ω load): +10 dB
Impedance	XLR: 50 Ω,1/4 inch: 50 Ω
Sensitivity	-102 dBm @ 10-5 BER
Image Rejection	> 70 dB, typical
Housing	ABS
XLR Output	Impedance balancedPin 1: Ground (cable shield)Pin 2: AudioPin 3: No Audio
Audio LED	Red: 2 dB below clip, Amber: 12 dB below clip,Green: 50 dB below clip
Power Requirements	12-18 Vdc at 150 mA, supplied by external power supply
Pin Assignments	XLR: 1=ground, 2=hot, 3=cold 6.35 mm (1/4")TRS: Tip=audio, Ring=no audio,Sleeve=ground
Dimensions (W x H x D)	7.125 in x 1.6 in x 4.1 in (181 mm x 40 mm x 104 mm)
Transducer Type	Condenser (electret bias)
Frequency Response	50 to 18,000 Hz
Polar Pattern	Cardioid
Output Impedance	150 Ohms at 1 kHz
Sensitivity (at 1,000 Hz)	Open Circuit Voltage: -50 dBV/Pa (3.15 mV)
Output Clipping Level	1000 Ohm Load at 1,000 Hz: +3 dBV (1.41 V)
Maximum SPL (at 1,000 Hz)	1000 ohm load (1% THD): 147 dB
Self-Noise	23 dB typical, A-weighted
Dynamic Range (1000 ohms)	124 dB (maximum SPL to A-weighted noise level
Signal-to-Noise Ratio	71 dB at 94 dB SPL (IEC 651)
Power	Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3
Connector	Three-pin (XLR) professional audio
Net Weight	0.61 lbs (278 g)