Shure SLX14 Wireless Instrument Microphone System

Home /
Shure SLX14 Wireless Instrument Microphone System (Discontinued)

Description

Details

Sound installations and working bands need powerful wireless tools that can be set up quickly and used confidently. Shure's rugged SLX UHF Wireless Systems exceed these demands with innovative automatic setup features, such as auto frequency scan and transmitter setup, exceptional wireless clarity, and legendary Shure microphones. Supporting 20 compatible systems across multiple UHF frequency bands, SLX smoothly integrates into houses of worship, lecture halls, conference rooms, and mobile gear cases. This SLX14 is a guitar/bass wireless system which includes SLX4 diversity receiver, SLX1 bodypack transmitter and WA302 guitar cable.

The SLX4 receiver brings unprecedented ease of use to wireless with Automatic Frequency Selection and Automatic Transmitter Setup. With included rack hardware and detachable antennas, it is ready for immediate installation right out of the box.

The SLX1 bodypack transmitter is designed to hold up to the most adverse conditions. Whether used with headworn, lavalier, instrument microphones, or with guitars or basses, the SLX1 is the definition of reliability.

The WA302 instrument cable connects the body-pack transmitter to a guitar or other instrument. Features a 2.5 foot (.75 m), length with 1/4-inch plug and 4-pin mini connector (TA4F) (supplied with instrument systems).

Features

Features

SLX4 Diversity Receiver Features:

Automatic Frequency Selection
Automatic Transmitter Setup
960 Selectable frequencies across 24 MHz bandwidth
Detachable 1/4 wave antennas
Microprocessor-controlled diversity
RF presence LED
5-segment audio meter
Multi-function, backlit LCD
Low battery indicator
Frequency and power lockout
Rugged metal chassis
Volume control on rear of unit
1/2 rack design
Furnished rack hardware
Non-slip bumpers for use out of rack
XLR and 1/4" outputs
Optional logic functionality for software echo cancellation and remote battery life monitoring

WA302 Guitar Cable Features:

2.5 foot (.75 m), length with 1/4-inch plug and 4-pin mini connector (TA4F) (supplied with instrument systems).
Connects between T1, UT1, SC1, BLX1, PG1, PGX1, GLXD1, QLXD1, SLX1, LX1, ULX1, UC1, UR1, UR1M and U1 body-pack trasmitter to a guitar or other instrument

SLX1 Bodypack Transmitter Features:

Automatic Transmitter Setup
Backlit LCD with timeout feature
Frequency and power lockout
3-segment battery fuel gauge
2 AA batteries (included) provide 8 hours continuous use
470 - 782 MHz operating range

Specification

SLX4 Receiver
Audio Output Level	XLR connector (into 600 Ω load): –13 dBV1/4 inch connector (into 3000 Ω load): –2 dBV
Output Impedance	XLR connector: 200 Ω, 1/4 inch connector: 1kΩ
XLR output	Pin 1: Ground, Pin 2: (+), Pin 3: (-)
Sensitivity	–105 dBm for 12 dB SINAD, typical
Image Rejection	>70 dB, typical
Power Requirements	12–18 Vdc at 150 mA, supplied by external power supply
Dimensions (W x H x D) (SLX4)	7.76" (197 mm) x 1.65" (42 mm) x 5.28" (134 mm)
Net Weight (SLX4)	1 lb 13 oz (816 g)
SLX1 Bodypack Transmitter
Gain Adjustment Range	30dB
Input Impedance	1 MΩ
RF Transmitter Output	30 mW maximum (dependent on applicable country regulations)
Housing	Molded ABS case
Power Requirements	2 "AA" size alkaline or rechargeable batteries
Battery Life	>8 hours (alkaline)
Dimensions (W x H x D) (SLX1)	2.50" (63.5 mm) x 4.25" (108 mm) x 0.75 (19 mm)"
Net Weight (SLX1)	10.2 oz (290 grams) without batteries

Documents